







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Westminster, CA
Replacing a vanity, setting new tile, or swapping out fixtures in Westminster costs between $450 for a single faucet-and-vanity refresh and $9,500 for a full tile-and-fixture overhaul of a mid-size hall bath. We do all three as one coordinated scope: the vanity set, the tile laid, and the fixtures trimmed out, with a written price in your hand before the first tile is cut. Bradford Remodeling Co Westminster works to The Garrison Standard, which means every line of the scope, every dollar, and the 365-Day Done Right Promise go into writing first. You’ll find the full-room version of this work on our Bathroom Remodeling in Westminster page. For vanities, tile, and fixtures on their own, call (833) 954-5086 and a live person picks up, day or night.
Our technicians have up to 22 years of experience, and they work with documented name-brand materials: Kohler and Moen fixtures, Cambria and Caesarstone surfaces, Wellborn and KraftMaid cabinetry. Nothing is left to guesswork on what’s being installed.

When You Need Vanities, Tile & Fixtures
Most homeowners don’t call because they want “tile.” They call because something in the bathroom stopped working or stopped looking right. Here are the scenarios we hear most in Westminster:
- The vanity is water-damaged at the base. With Westminster’s marine air and rooms that hold humidity, particleboard cabinet boxes swell at the toe kick and the doors quit closing square. Once the box is soft, no amount of re-caulking saves it.
- Grout lines are cracked or the tile is drummy. Press a thumb on a floor tile in an older Westminster bath. If it clicks or shifts, the thinset has let go and the tile will pop. That’s a substrate problem, not a cleaning problem.
- The shower valve drips or the trim is dated. A Moen or Kohler valve that drips after the cartridge swap points to the valve body behind the wall. That means opening the tile, replacing the rough-in, and re-tiling the wet wall in one pass.
- You’re prepping for resale or a rental turnover. Westminster has a steady rental market near the colleges and along Beach Boulevard. A clean vanity, fresh floor tile, and matching fixtures are what appraisers and tenants both read first.
- Fixtures don’t match and the layout is awkward. A 30-inch vanity in a room that fits 48 inches wastes the counter. We measure the rough-in and set a vanity that actually fits the wall, with the mirror and lighting squared to it.
- An old remodel failed inside the year. If a prior crew set tile over a wet substrate or left the vanity unsealed at the wall, it shows up fast. We repair the cause, then install.
Our Vanities, Tile & Fixtures Process
The work is sequenced so nothing gets installed over a problem we haven’t already fixed. That’s how “squared away” at close actually looks: clean site, documented scope, signed written guarantee in your hand.
- Measure and specify. We measure the rough-in dimensions, check the wall for plumb, and confirm the floor substrate condition. You pick the vanity, surface, tile, and fixtures, and we write the specification down with the exact brand and model.
- Written price before any work. You get a line-item price in writing, with no numbers that move at the door. That’s the Garrison Standard at work, not a courtesy.
- Demo and substrate prep. Old vanity, tile, and fixtures come out. We check the substrate: backer board on the walls, cement board or a proper uncoupling membrane on the floor. Tile set over greenboard or over a wet subfloor fails, so we don’t do it.
- Rough-in and valve work. If the shower or sink valve is being replaced, the rough-in is set and tested before anything covers it. Plumbing and electrical rough-in are permitted work in Westminster, so this stage is inspected where the code requires it.
- Tile and finish set. Floor and wall tile are laid, grouted, and sealed. The vanity is set plumb and sealed at the wall and floor. Countertop goes on, then the sink and faucet trim.
- Trim out and walkthrough. Toilet, shower trim, towel bars, mirrors, and lighting go in last. We run water, check for leaks, clean the site, and hand you the signed 365-Day Done Right Promise in writing.

Vanities, Tile & Fixtures Pricing in Westminster
Here is what these jobs actually run in Westminster. These are honest working ranges, and your written price will land inside them once we’ve measured.
| Scope | Typical range |
|---|---|
| Single vanity swap (cabinet, top, faucet, drain) | $450 – $1,800 |
| Double vanity with Cambria or Caesarstone top | $1,500 – $3,800 |
| Floor tile, hall bath (about 35 – 50 sq ft) | $900 – $2,200 |
| Shower wall tile including waterproofing | $2,200 – $5,500 |
| Fixture trim-out (faucet, shower valve and trim, toilet supply, towel bars) | $350 – $1,400 |
| Full hall-bath tile and fixture overhaul | $5,500 – $9,500 |
What moves the number: tile size and material (a 12×24 porcelain is cheaper to lay than a mosaic sheet), whether the shower valve body has to be replaced behind the wall, whether the substrate is sound or has to come out, and vanity size. Cambria and Caesarstone tops cost more than laminate but hold up to a wet room, and Kohler and Moen fixtures carry manufacturer warranties that back our own guarantee.
We give the price range in dollars and put a real number on the page and on the quote. No “call for pricing” games. Estimates are free, and the written price comes before the first tool is out.
FAQs – Vanities, Tile & Fixtures
How much does a new vanity cost in Westminster?
A single vanity swap in Westminster typically runs $450 to $1,800, and a double vanity with a stone top runs $1,500 to $3,800. The range hinges on cabinet size, whether you go with Wellborn or KraftMaid, the countertop material, and whether the plumbing rough-in needs to move. Call (833) 954-5086 for an exact written quote. Estimates are free.
Can you install tile over my existing tile?
Sometimes, if the existing tile is well-bonded, flat, and the added height won’t foul the door or the toilet flange. But in a Westminster bath, we usually find at least one drummy tile or a soft spot at the pony wall, and tile set over a failing layer pops within a year. We check the substrate first and tell you straight what has to come out.
How long does a tile-and-fixture job take?
A single vanity and floor-tile job usually takes 2 to 4 working days. A shower wall re-tile with a valve replacement runs 4 to 7 days, mostly because waterproofing and thinset cure times can’t be rushed. We give you the schedule in writing at the start and hold to it. Call (833) 954-5086 to book a measure.
Do the fixtures you install come with a warranty?
Yes. Kohler and Moen fixtures carry their manufacturer warranty, and every completed job from Bradford Remodeling Co Westminster carries the 365-Day Done Right Promise. If the tile lifts, the vanity seal fails, or a fixture we set fails inside that year, we come back and correct it at no charge. That’s the written guarantee, and you hold a signed copy at close.
What is the 365-Day Done Right Promise?
It’s a full-year written guarantee on every completed project. If the work fails within that year, Bradford returns and corrects it at no charge. It’s part of the Garrison Standard, the framework behind every written price and every finished job we hand over.
Do you background-check the crew?
Yes. Background-checked, uniformed technicians arrive on every job, and a live person answers the phone 24 hours a day, 7 days a week, so you know exactly who’s coming and what the next step is. That standard is set at the Garrison Partners level, not left to a job site.
Squared Away Before We Leave
We work through this like a checklist, and it shows at the end. The old vanity is hauled off, the tile is grouted and sealed, the fixtures are set square and tested for leaks, and the site is swept clean. You get the documented scope and the signed guarantee in your hand, not a verbal promise you’ll have to remember at year two.
If you’re planning a fuller room, the cabinets, tile, and fixtures can be tied into the whole job on our Westminster bathroom remodeling page, and the broader exterior products we install (including Owens Corning and CertainTeed systems) are documented on our home page.
Take the Next Step
Call (833) 954-5086 for a free estimate on your vanities, tile, and fixtures. A live person answers, day or night. We’ll measure the room, confirm the specs, and hand you a written price with the 365-Day Done Right Promise spelled out. That’s how the job starts squared away in Westminster.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster.


