







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Westminster Owner’s Guide
If you own a home fitted with Wellborn’s driveway and paver system, replacing a failed section in Westminster typically runs $7,000 – $18,000 for a full paver driveway install, with smaller section repairs priced against the same square-foot benchmark. Bradford Remodeling Co Westminster is an independent service provider; we’re not affiliated with Wellborn, but we install and repair their hardscape products and source the correct matching pavers for your home’s existing run. Most Westminster owners discover the failure the same way: a paver lifts underfoot after a rain, sand washes out from the joints, or a crack spiders across a section that looked solid last season. By the time they call, the substrate underneath has usually been taking water for months.
Key takeaways:
- Wellborn paver driveways in Westminster generally fall into the $7,000 – $18,000 installed range for a full run.
- Section repairs follow the same per-square-foot pricing, so the cost scales with area, not a flat call-out fee.
- Matching the exact paver series, color batch, and thickness matters more than most homeowners expect.
- Substrate failure, not the paver face, is the usual culprit – and it’s invisible until something shifts.
- Every completed install carries the 365-Day Done Right Promise: a written full-year guarantee, and we return at no charge if the work fails inside that window.
Which Wellborn Models This Applies To

Wellborn’s driveway and paver line is built around interlocking concrete pavers in several series, and the compatibility question that trips homeowners up most often is thickness. Standard driveway pavers run about 60mm; thinner 40mm pavers are meant for patios and walkways, and putting a 40mm paver on a Westminster driveway that sees daily vehicle traffic is a recipe for early failure. If you’re matching a new section to an existing one, check the paver’s side profile: a 60mm paver sits roughly 2 3/8 inches thick, and that measurement decides whether your replacement run integrates or sits proud.
The second gotcha is color batch. Concrete pavers are cast in lots, and two runs of the same Wellborn color name can differ slightly in tone. That’s why we always pull the model and series information from a manufacturer label if one is still visible under a lifted edge, or measure an existing paver directly to confirm both thickness and face dimensions before ordering. On the OEM-versus-aftermarket question: a genuine Wellborn paver is the only way to guarantee a true color and dimension match to your existing run. Quality aftermarket equivalents can work for a fully replaced section, but for a repair that abuts existing pavers, matching the original Wellborn series is the safer call. We’ll tell you plainly which path your job needs before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
Westminster’s climate is hard on hardscape. Marine air, seasonal rain that arrives quickly, and summer heat cycling through the day all stress the joints and substrate. Here’s what failure looks like:
- Pavers lifting or rocking underfoot. This usually means the bedding sand has washed out or the base wasn’t compacted to depth when it was laid. A paver that moves is a paver taking water underneath it.
- Sand washing out of the joints. Joint sand is what locks the pavers together. When it erodes – and it does faster on a slope or near a downspout – the whole surface starts to shift and weeds move in.
- Uneven settling or dips. A low spot that holds water after rain points to a substrate problem, not a surface problem. The base has compacted or failed, and no amount of re-sanding will fix it.
- Cracked or chipped paver faces. Hairline cracks that spread often trace back to a point load on an under-supported paver, or to a paver that was laid too thin for driveway use. Once a face cracks, it admits water and the crack grows.
- Efflorescence and persistent staining. White mineral bloom on the surface can be normal early on, but staining that returns after cleaning usually signals water moving through the system where it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest pricing for a Westminster driveway and paver job:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the number: square footage, base depth and prep, existing material removal, and whether the paver series you need is a special order. We give you a written price before any work starts – no numbers that move at the door, no surprise line items. Labor and materials are broken out so you can see exactly what the paver run, the base, and the install each cost. Every completed project is covered by the 365-Day Done Right Promise; if the work fails inside that full-year written guarantee, we come back and correct it at no charge.
DIY or Call Us?
Some things you can check safely yourself. Walk the driveway after a rain and note where water pools. Lift a loose paver edge and look at the bedding sand underneath. Confirm a paver’s thickness with a tape measure to see whether it’s a driveway-grade 60mm or a thinner patio paver. Re-sanding joints is a reasonable homeowner task on a small scale, and sealing is manageable with the right product.
Where it goes wrong: base prep and compaction. Paver driveways fail at the substrate far more often than at the surface, and getting a properly compacted base at the right depth is where DIY installs most commonly fall short. A new section laid over a weak base will look fine for a season and then start to settle and rock – and by then you’ve paid twice. If a section is lifting, settling, or holding water, that’s a base problem, not a sand problem, and it’s worth having it looked at before you spend money on surface fixes. Call (833) 954-5086 and we’ll tell you straight whether your job is a repair or a section replacement.
FAQs

How long does a Wellborn paver driveway last in Westminster?
A properly installed Wellborn paver driveway typically lasts 25 to 30 years or more, but longevity in Westminster depends on base prep and joint maintenance. Because our marine climate and seasonal rain move water fast, re-sanding joints every two to three years and sealing on schedule is what keeps the system holding. A paver laid on a shallow or poorly compacted base won’t reach that lifespan regardless of the paver quality. Call (833) 954-5086 for an exact assessment – estimates are free.
Can my failing paver driveway be repaired instead of replaced?
Often, yes – a single settled section or a cracked paver can be pulled, the base corrected, and matching pavers reset. Whether a repair makes sense depends on how much of the base has failed and whether we can match your Wellborn series and color batch. We’ll tell you honestly if a repair is the right call or if a section replacement is the better spend. Call (833) 954-5086 to schedule a free estimate and we’ll walk you through both options.
How long does a paver section replacement take?
A single-section repair is typically a one-day job once the matching pavers are on site, while a full driveway installation runs several days depending on square footage and base prep. Special-order paver series add lead time before we start. You’ll have a written schedule before work begins. Call (833) 954-5086 for a timeline specific to your driveway.
How do you source the right Wellborn paver for my home?
We identify your paver by thickness and face dimensions, confirm the series, and match the color batch to your existing run so the repair integrates rather than stands out. We don’t carry parts on a truck – pavers are ordered to your job spec. Bradford Remodeling Co Westminster works from a documented roster of name-brand materials, and we also handle KraftMaid, Cambria, and Silestone when a project calls for cabinetry or surfaces alongside the hardscape. Call (833) 954-5086 for a free estimate.
When you’re ready, give us a call at (833) 954-5086 for a free estimate. We answer with a live person around the clock, we put the price in writing before a single tool comes out, and every completed job closes with a clean site, a documented scope, and a signed written guarantee in your hand – The Garrison Standard, the same framework behind every Bradford project. Our technicians bring up to 22 years of experience to the job, and the background-checked, uniformed crew that shows up is the crew you were told would arrive.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












