







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Westminster Owner’s Guide
Toto-compatible home additions and ADU construction in Westminster runs $45,000 – $130,000 for additions and $90,000 – $220,000 for a full ADU, with detached and attached builds, garage conversions, and Toto-equipped bath and kitchen packages all inside that band. The build itself isn’t same-day work, and we won’t pretend it is. What you get from us is a written, line-item price before a single tool comes out, and specs traced to the manufacturer for every fixture you’ve chosen, including the Toto.
Most Westminster owners don’t land here because a part failed. They land here because they bought a home with a Toto suite already installed, or they’re building an addition and want their Toto fixtures carried through the new bath and kitchen. The failures we run into are predictable: supply lines and stop valves weeping behind a skirted toilet, a fill valve that won’t shut off, a seat that won’t stay heated on a washlet. Those are the calls where a straight diagnosis saves you the most money.
Which Toto Models This Applies To

Toto makes additions work on a spectrum. On the residential side, the build package is set by what the fixture needs, not the fixture brand alone. A skirted one-piece toilet in a new hall bath needs a rough-in measured to the flange, and Toto’s standard 12-inch rough-in is the number to confirm before the frame goes up. A shower with a thermostatic mixer needs a deeper valve wall than a cheap pressure-balance unit. Get those numbers wrong and you’re opening finished tile in a Westminster bathroom inside of a year.
To identify what you have, pull the model plate. On a Toto toilet it’s stamped on the underside of the tank lid or the back of the bowl. On a washlet it’s a sticker on the underside of the seat. Read the series (C100, S350e, S550e, and so on) and the model number, then match it to the spec sheet before you buy anything. That plate is the difference between a part that fits and a return.
The OEM-versus-aftermarket call is where Westminster owners get burned. Toto’s own fill valves, flush valves, and seat assemblies are priced higher because the tolerances are tighter and the gaskets seat correctly. Aftermarket equivalents run $10 – $30 cheaper and fit maybe 60% of the time. For a toilet you use twice a day, a $25 savings isn’t worth a leak behind the skirt. For a supply line under a sink, a quality aftermarket braided line is fine. Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with Toto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
- The fill valve runs and won’t stop. The flapper or fill valve seat is worn, or mineral scale has built up on the seal. Westminster’s hard water is the usual culprit.
- Water in the bowl won’t settle. The flush valve gasket has a hairline tear or the tank-to-bowl gasket is pinched. Left alone, it wastes hundreds of gallons a month.
- Washlet seat stays cold or cycles oddly. The heating element or control board is failing. Toto units from the mid-2010s onward are repairable, but the board swap is the expensive part.
- Water weeping behind the toilet base. The supply line, stop valve, or wax ring has failed. On a skirted Toto this hides well; by the time you see it, the subfloor may be soft.
- A wobble when you sit. The closet bolts have loosened, or the flange is cracked. Ignoring a wobble is how a $40 repair becomes a $400 flange replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Westminster, the installed price on a Toto-equipped bath or kitchen package inside an addition runs the following. We quote these as line items, written, before work starts.
| Item | Installed Range |
|---|---|
| Home Addition (Toto-eq. bath/kitchen package included) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Bathroom Remodel (within addition) | $9,000 – $28,000 |
| Kitchen Remodel (within addition) | $14,000 – $45,000 |
What drives the range: foundation and framing complexity, whether a new utility trench is needed, Toto fixture series chosen (a C550e adds real cost over a base model), and finish level. Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee. If the work fails inside that window, we return and correct it at no charge. No change orders at the door. A live person answers our phone, 24/7.
DIY or Call Us?
You can safely check the model plate on the tank lid, verify the supply line under the sink, and confirm the rough-in measurement with a tape. What you shouldn’t do is open a toilet tank on a skirted Toto and start unscrewing the fill valve without a shutoff that actually holds. High-tension parts inside a pressure-assisted unit, live electrical on a washlet seat, and gas lines for a new addition are all places where DIY goes wrong fast. A trained technician works around Westminster every week and knows the local water, the local permit office, and the models.
Call (833) 954-5086 to schedule your free estimate. We’ll give you a written price and a plain answer on whether to repair or replace.
FAQs

How long does a Toto toilet or washlet last in Westminster? A Toto toilet typically lasts 20 – 30 years; the fill valve and flapper inside it fail every 5 – 7 years, and Westminster’s hard water pushes that toward the shorter end. A washlet seat usually runs 7 – 10 years before the control board gives out. Call (833) 954-5086 if yours is older and acting up.
Can it be repaired instead of replaced? Yes, most Toto failures are a part, not the whole fixture. Fill valves, flush valves, seat gaskets, and supply lines are all replaceable. A cracked bowl or a burned control board on a newer washlet is often cheaper to replace than repair. We’ll tell you which one you’re looking at.
How long does the swap take? A fill valve or supply line swap runs 30 – 60 minutes. A washlet seat replacement is 20 – 45 minutes. A full toilet replacement inside an addition is 2 – 4 hours. Call (833) 954-5086 for an exact quote; estimates are free and the price is written before we start.
How do you source the Toto part? We match the model plate to the manufacturer’s spec sheet and order the correct OEM series component. We don’t carry parts on a truck, so every part is sourced to your model before the visit. Same for our other documented brands, including KraftMaid, Cambria, and Silestone cabinetry and surfaces.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












