







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Westminster Owner’s Guide
If you’re pricing a Therma-Tru door package for an addition or ADU in Westminster, plan on $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU build, with Therma-Tru entry and patio systems rolled into the framing, finish, and permit scope. We’re an independent remodeling contractor, not affiliated with Therma-Tru, and we install their doors as part of the documented brand roster we build with. Most Westminster owners land here after a quote that never itemized the door package, or after a contractor vanished mid-framing with the entry door still leaning against the garage. The guide below tells you what the door side of an addition actually involves, how Therma-Tru parts are matched to a build, and what the numbers look like.
Which Therma-Tru Models This Applies To

Therma-Tru makes fiberglass and steel entry and patio door systems, not additions or ADUs. So “Therma-Tru home additions” really means the door package inside a build: a Fiber-Classic or Smooth-Star entry, a fiberglass patio slider, or a sidelite and transom assembly framed into a new wall. The parts that fail or need matching are the ones attached to those units: hinges, sill and threshold assemblies, weatherstrip, multipoint hardware, strike plates, and glass cassettes.
To identify the right part, pull the manufacturer label off the door edge or jamb. It lists the series and unit size, and a photo of that label plus a tape measure across the slab gets you the correct replacement. Therma-Tru door slabs and sills are sized in specific widths and depths that don’t always line up with a rough opening a previous owner cut. That’s the compatibility catch on a Westminster addition: the framing was built to the rough opening, not to the door, so the part has to match the door, not the hole.
OEM Therma-Tru replacement parts cost more but keep the warranty and fit intact. A quality aftermarket threshold or hinge runs cheaper and works fine for a rental ADU where the door isn’t the finish showcase. For a primary-residence addition, we spec OEM. For sheds, garages, and ADU side entries, aftermarket is a legitimate call. We also install KraftMaid, Cambria, and Silestone across these builds, so the door package isn’t the only spec worth pinning down in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
These are the door-side symptoms that show up on an addition or ADU in Westminster and what’s usually behind them.
- The door sticks or drags in summer. Fiberglass and steel slabs expand with heat, and a Westminster addition facing west can push the slab against the strike side. Usually the hinges have sagged or the jamb wasn’t shimmed square.
- Water pools at the threshold after a storm. Sills fail at the seal, not the slab. On a new addition this usually means the threshold wasn’t set with the right pan flashing and slope.
- Daylight shows around the door. Weatherstrip compresses over time, or the frame was racked during framing. You’ll feel the draft before you see the gap.
- The lock or multipoint won’t catch. Hardware misalignment after settling, or the strike plate was set for a different Therma-Tru series. Interchangeable parts is a common assumed that bites here.
- Fogging between glass panes. The sealed unit lost its gas fill. For a sidelite or transom this is a glass cassette swap, not a whole-door replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On a Westminster addition, the door package and its parts ride inside the build budget, so the range reflects the whole scope, not the hinge alone. Here’s how the numbers break down.
| Scope | Westminster range |
|---|---|
| Home addition (includes Therma-Tru door package) | $45,000 – $130,000 |
| ADU construction (includes door and window package) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
| Door hardware or threshold part, labor included | $180 – $650 |
| Sealed glass unit replacement, labor included | $250 – $900 |
What drives the range: square footage, foundation type, whether the ADU shares a wall or stands detached, and how many Therma-Tru units the plan calls for. Every Bradford project gets a written price before any work starts, itemized line by line, and the completed work carries our 365-Day Done Right Promise. If something we installed fails inside that year, we come back and correct it at no charge. That’s in writing, signed, in your hand at close.
DIY or Call Us?
You can safely check a few things yourself. Look for the Therma-Tru label on the door edge, measure the slab and rough opening, take a photo, and note where the door drags or leaks. That’s the homework that saves time when you call.
Where it goes wrong: adjusting hinges or strike plates to chase a drag can rack the frame further and open a leak path. Cutting a threshold to fit a rough opening removes the pan flashing and invites water into wall cavities. And if the failure is at the sill or glass seal, the fix is framing and water management, not a screwdriver.
For additions and ADUs, the door parts aren’t the real cost – the wrong install under a leak is. Call Bradford Remodeling Co Westminster at (833) 954-5086 for a free estimate with a written price before we touch a tool.
FAQs

A well-installed Therma-Tru fiberglass or steel entry lasts 20 to 30 years, with hardware and weatherstrip typically needing attention in the 8 to 15 year window. The inland Southern California heat and dry-to-damp cycles push hinges and sills harder than a coastal install, so plan on periodic hardware checks. Call (833) 954-5086 and we’ll tell you honestly whether it’s a part swap or a full door.
Often yes. A dragging door is usually a hinge or strike issue, and a leaking sill can sometimes be re-sealed if the pan flashing is still intact. Weatherstrip and hardware swaps are the cheap fixes. Sealed glass units and rotted sills are replacements. The only way to know is an on-site look, and it’s free to schedule at (833) 954-5086.
A hardware or threshold swap is a half-day job. A sealed glass cassette is about the same. The timeline that matters is an addition or ADU, and that runs by permit and framing schedule, not by the door part. Call (833) 954-5086 for a straight answer on your scope.
We pull the manufacturer label or measure the unit, then source the correct Therma-Tru series part or a documented aftermarket equivalent. We’re open about which one you’re getting and why, and we don’t stock parts on trucks – sourcing is honest and in writing. Call (833) 954-5086 for a free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












