







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Westminster Owner’s Guide
We handle Therma-Tru entry-door work and the driveway and paver surfaces your door opens onto, and a paver driveway installation in Westminster typically runs $7,000 – $18,000 installed, with concrete coming in around $4,500 – $12,000. If you’re searching “Therma-Tru driveway & pavers,” you’ve likely found a failed threshold, a sinking walkway, or a door that won’t close clean over the slab. That happens most on older Westminster homes where the original pour has settled and the door’s sill no longer sits flush. We square the whole approach, door and surface together, before anyone lifts a tool.
Which Therma-Tru Models This Applies To

Therma-Tru makes entry doors and door systems, not pavers. What this page covers is the matchup between your Therma-Tru door and the driveway, walkway, or patio it meets: the sill, threshold, and the slab or paver course directly beneath. Most Westminster homes we see carry a Therma-Tru Fiber-Classic or Smooth-Star entry door, and both sit on the same style of adjustable sill. Your first job is identifying what you have. Look inside the door jamb for the manufacturer label. Measure your rough opening and the door slab. Match the series to the parts list.
On the OEM question: for a threshold or sill cap, an OEM Therma-Tru part is the safest fit because the profile matches the door system. Aftermarket sills can work, but the ones sold at big-box stores often run slightly thin and don’t sit flat on a settled slab, which is exactly why they fail early. If your door is one model and the label has worn off, we identify it before we order anything, so you get the right part the first time. Bradford Remodeling Co Westminster is an independent service provider, not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Door and Driveway Interface Is Failing
- Water pooling at the threshold after rain. The drive or walkway has settled away from the door or sloped the wrong way, so water runs toward the house instead of away from it.
- The door binds or drags as it swings. A slab that has dropped or a paver course that’s heaved lifts under the sill, throwing the door out of square and putting stress on the hinges.
- A visible gap under the sill. The sill cap has cracked, or the substrate (the slab or base material) has shifted, leaving daylight and air where the door should seal tight.
- Pavers rocking or lifting near the entry. Loose base or a failed joint lets pavers shift, and that lifts the surface your door sits over.
- Rust or staining at the bottom of the door. Poor drainage keeps the sill wet, and that dampness works its way into the door frame over time.
Replacement Cost & What’s Included

Here’s how Westminster pricing breaks out for the surfaces your Therma-Tru door opens onto:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, base prep, and how much drainage correction the entry needs. You get a written price before any work starts, parts and labor itemized, so nothing moves at the door. Every completed project is backed by our 365-Day Done Right Promise: if the work fails within the guarantee period, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check some of this yourself: look for daylight under the sill, sweep a level across the walk, and watch where water runs after a rain. What goes wrong with DIY is base prep and drainage. A haul-and-replace on pavers or a re-pour on a slab done without correcting the slope just fails again, and then you’re paying twice. That’s the part we handle. Call (833) 954-5086 and we’ll give you a straight number and a written estimate before work begins.
FAQs

How long does a paver driveway last in Westminster? A properly base-prepped paver driveway holds up for decades, but Southern California’s dry summers and heavy winter rain seasons stress the base if drainage isn’t set right. Call (833) 954-5086 for a free estimate.
Can a failing threshold be repaired instead of replaced? Often yes. A cracked sill cap or a minor slab gap can be corrected without a full replacement, and we tell you which you’re looking at before quoting. Call (833) 954-5086 for an exact answer on your door.
How long does the swap take? A threshold repair is typically a short visit; a full paver or concrete driveway replacement depends on square footage and base work. You’ll get a written timeline before we start.
How do you source the part? We order the Therma-Tru-compatible sill or threshold to your door’s measured specs and pair it with the surface work, so the door sits clean on the finished grade. Call (833) 954-5086 to schedule your free estimate.
Ready to Square It Away?
Whether your Therma-Tru door needs a threshold fix or your Westminster drive needs replacing, we give you a written price before any work starts, and every project carries our 365-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone on interior jobs, but for your driveway and paver work, we stay focused on the door-to-surface matchup. Call (833) 954-5086 for a free estimate, and a live person will pick up.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












