







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Westminster Owner’s Guide
Most Westminster homeowners we meet aren’t shopping for a new kitchen because they want one. They’re calling because something failed. A cabinet door that won’t stay shut. A drawer glide that grinds. A hinge that snapped at the plate, leaving the door hanging off its frame at a hard angle. That broken part is usually the phone call.
Here’s the straight answer on cost: a full kitchen remodel in Westminster runs $14,000 to $45,000 installed. A small kitchen remodel lands between $9,000 and $20,000. If you’re replacing one cabinet run, cabinet installation is $4,000 to $13,000. Countertops run $2,000 to $6,500, a backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. We write that number before any work starts, and it doesn’t move once the job is underway.
We install Sterling-compatible cabinetry and surfaces. Bradford Remodeling Co Westminster is an independent contractor, not affiliated with Sterling. We’re a member of the Garrison Partners family, and every job carries a written price and a written guarantee.
Key Takeaways
- Kitchen remodels in Westminster: $14,000 – $45,000 installed, quoted in writing before work begins.
- Cabinet-only replacement: $4,000 – $13,000.
- Every completed project carries the 365-Day Done Right Promise, a full-year written guarantee.
- Our technicians have up to 22 years of experience, background-checked and uniformed on every job.
- A live person answers the phone, 24 hours a day, 7 days a week.
Which Sterling Models This Applies To

Sterling builds stock and semi-custom cabinetry in lines that share a lot of geometry but not all of it. The two things that trip owners up most are door overlay and box depth. Full-overlay doors sit nearly flush over the cabinet face and use a concealed European hinge, while partial-overlay doors leave a strip of the cabinet frame showing and use a hinge with a different plate setting. Pull the wrong hinge for your overlay and the door either rubs the cabinet next to it or hangs a gap you can see from across the room. Box depth matters too: base cabinets are commonly 24 inches deep, but wall cabinets come in 12-inch and 13-inch depths that look identical installed and aren’t interchangeable.
Find the label inside the cabinet box, usually a sticker on the inside of the door or the back panel. It gives you the line name and often a model or SKU. Photograph it before you call. That photo, plus your door measurements, is what we match against.
On parts, you have two honest choices. OEM Sterling parts match the original exactly, and for a single broken hinge or glide that’s often the right call. For a cabinet run that has aged past the point where matching matters, a quality aftermarket or a different documented brand like KraftMaid or Wellborn makes more sense. Cambria and Silestone are the surfaces we install most on Sterling cabinet frames. We don’t claim to stock parts and we don’t carry a parts inventory on a truck. What we do is source the right part and install it correctly, with a spec sheet you can trace.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Kitchen Remodeling Is Failing
Most failures announce themselves before they get expensive. Here’s what to look for and what’s usually behind it.
- A door that hangs crooked or rubs the frame. The hinge plate has loosened in the cabinet face, or a screw hole has stripped out. Left alone, the door keeps dragging and eventually the hinge tears away from the wood.
- Drawer that sticks or closes hard. The glide is worn, or debris has collected in the track. On older under-mount glides, the clips that hold the drawer in place crack, and the drawer starts riding uneven.
- Water staining under the sink or at the countertop seam. A failed seal, a cracked caulk line, or a slow drip getting behind the substrate. This is the one to fix first, because water behind a cabinet box rots the panel from the inside out.
- Countertop edge lifting or a visible gap at the backsplash. Adhesive failure or movement in the cabinet frame underneath. A seam that’s separating will let water in every time you wipe the counter.
- Doors that won’t stay closed, or a cabinet that’s no longer square. Often the box has shifted off the wall fasteners, which happens more in older homes where studs have settled.
In our experience across Westminster, the single most common cause is a stripped hinge screw. It looks minor and it isn’t, because the door’s weight keeps working the hole wider every time it swings.
Replacement Cost & What’s Included

Here’s what the numbers actually buy in Westminster, broken out line by line.
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the number: cabinet line and door style, whether the layout changes (moving a sink means moving the rough-in plumbing), countertop material and edge profile, and how much of the old kitchen has to come out first. Parts and labor are quoted separately so you can see what you’re paying for what. Every completed job is covered by the 365-Day Done Right Promise: a full year, written, and if the work fails inside that window we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safe to check yourself. Open and close every door and drawer and note which ones drag. Photograph the label inside each cabinet. Wipe down the track of a sticky drawer and see if it improves. Put a paper towel under the sink and check it after a day for damp spots. Look at the caulk line where the countertop meets the backsplash and see if it’s cracked or pulling away.
Where it goes wrong is when a homeowner tries to re-hang a sagging door or reseat a hinge without knowing the overlay, or tries to reseal a countertop seam without finding the water source behind it. A strip-and-replace on a hinge plate is doable. Chasing a slow leak into a cabinet box, or resetting a door that’s out of square, is where a small repair becomes a full cabinet run. If you’ve already tried the simple fix and it didn’t hold, that’s your signal. Call us at (833) 954-5086. A live person answers, day or night, and the estimate is free.
FAQs

A well-installed cabinet box holds up for 20 to 30 years. Hinges and glides are the wear items and typically need attention sooner, often in the 10-to-15-year range with daily use. In Southern California, the bigger threat isn’t age, it’s moisture. A slow leak under the sink will rot a cabinet panel far faster than normal wear ever will.
Yes, often. A stripped hinge screw can be filled and re-drilled, and a single broken glide can be swapped without touching the cabinet. The repair stops making sense when the cabinet face itself is split, or when a leak has softened the panel. At that point you’re replacing the box, not the hinge. Call (833) 954-5086 for a free estimate and we’ll tell you which one you’re looking at.
A single hinge or glide swap is a quick visit. A cabinet run replacement runs a few days. A full kitchen remodel in Westminster takes weeks, and we give you a written schedule before work starts, so you know what to expect and when the crew will be in your home.
We match against your cabinet label and door measurements, then order the correct part through the manufacturer’s spec. If the exact OEM piece isn’t available, we tell you what the equivalent is and why it fits. We don’t stock parts ourselves, and we don’t guess. You get the part number in writing before we order. Call (833) 954-5086 to schedule your free estimate.
Get the Price in Writing
If a hinge gave out in your Sterling kitchen and you’ve been living with a door that won’t close, that doesn’t have to be the start of a big project. Sometimes it’s one part. Bradford Remodeling Co Westminster will tell you honestly which one it is, quote you a written price before any work starts, send background-checked, uniformed technicians, and stand behind the job for a full year under the 365-Day Done Right Promise. Call (833) 954-5086 for your free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












