







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Windows & Doors: The Westminster Owner’s Guide
Window and door systems built around Schluter components are usually installed here in the $4,500 – $15,000 range for standard replacement, or $8,000 – $25,000 for impact-rated units, depending on count, frame material and opening prep. We install and service these systems across Westminster, and we’ll tell you the honest number before anyone touches the opening. Most Westminster owners find out something has failed the same way: a door that won’t latch square, a window that fogs between the panes, or water staining the drywall under a sill after the first real rain of the season.
Which Schluter Models This Applies To

Schluter isn’t one product line. Their window and door work splits into three areas that matter for parts: the tile-edge profiles used around window reveals and door jambs (RENO-U, RENO-V, JOLLY, QUADEC), the waterproofing membranes and sealing systems that protect the rough opening (KERDI-BAND, KERDI-FLEX, and the KERDI-BOARD panels often used to build out a deep sill), and the movement-joint profiles (DILEX) that let a tile-to-frame transition flex instead of cracking.
Identifying the right part starts with measuring the reveal depth in millimeters, not fractions of an inch. Schluter profiles are sized in metric: a 3/8 in. tile reveal is not the same as a 10 mm profile, and the gap shows. Check the back of any loose profile for the stamped name and size, photograph the label, and measure the flange width of the old piece with a caliper. That measurement is what tells us whether you need an 8 mm or a 12 mm leg.
On the OEM-vs-aftermarket question for Schluter specifically, there isn’t a meaningful generic equivalent. The roll-in flange geometry and the felt or fleece backing are the parts that make the system waterproof, and a lookalike profile won’t accept a Schluter band seal the same way. Where aftermarket is sensible is on the hardware side: hinges, weatherstrip, sill gaskets and closers from major door manufacturers are fine to swap, and often better than the originals. Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with Schluter; we source genuine Schluter profiles and matching hardware from the manufacturer’s distribution network.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Windows & Doors Is Failing
Water staining or efflorescence at the sill. The band seal at the rough opening has failed somewhere, usually at a corner. Water gets behind the profile and travels along the framing until it shows up as a stain or white mineral crust.
- A cracking line where tile meets frame. That’s a rigid grout joint where a movement profile belonged. The frame expands and contracts in the sun, the grout doesn’t, and the crack widens every season.
- Fogging between window panes. The insulated glass unit’s perimeter seal has failed. This is a glazing failure, not a Schluter failure, but it’s the most common problem we get called about on these systems and it means the IGU needs replacing.
- A door that sticks or won’t latch square. Hinge wear or a shifted rough opening. On a Westminster door facing west, thermal cycling through summer afternoons can move a frame enough to break the latch alignment.
- Peeling or loose edge profile. The thinset bond behind a profile has let go, often because the substrate wasn’t primed. You’ll see the profile lifting away from the tile edge with a hollow tap.
Westminster’s inland Orange County climate is the driver behind most of these. Hot dry summers and a wet winter push frames and substrates through real movement, and a profile installed without room to flex is the first thing to show it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually costs in Westminster, installed, with parts and labor broken out on the written quote:
| Scope | Installed price range |
|---|---|
| Single window replacement (standard) | $4,500 – $15,000 for the project; single-unit pricing quoted line by line |
| Impact-rated window installation | $8,000 – $25,000 |
| Profile and band-seal repair at one opening | Quoted per opening after inspection |
| Door hardware swap (hinges, closer, weatherstrip) | Quoted line by line |
What drives the range: number of openings, frame material, whether the rough opening needs framing repair once we get the old unit out, and impact certification if you want it. We do not guess at numbers at the door. Every quote is a written, line-item price before work starts, with no change orders that appear mid-job. The work carries the 365-Day Done Right Promise: if the install fails within a full year, we come back and correct it at no charge. We also install KraftMaid, Cambria and Silestone on the interior side of these same jobs if a window wall is part of a larger remodel.
DIY or Call Us?
You can safely check a few things yourself. Tap the edge profiles for hollow spots, run a level across a sill, look for daylight around a closed door, and photograph any label on the back of a loose profile. Those checks take ten minutes and give us what we need to quote accurately by phone.
Where DIY goes wrong on these systems is at the rough opening. Properly sealing a window or door against water intrusion means removing the old band, cleaning the substrate, priming it, and setting the new membrane with the correct overlap and corner patches. Get the overlap sequence wrong and the first winter rain finds it. Chasing a crack or a leak without fixing the movement behind it just kicks the failure down the road. If a window is high, a door is heavy, or the glass is damaged, that’s not a homeowner job; a dropped unit or a hand through broken glass puts you in the emergency room. Call us at (833) 954-5086 and we’ll tell you honestly whether it’s a repair or a replacement before you spend a dollar.
FAQs

A well-installed system with genuine Schluter profiles and proper waterproofing holds 20 to 30 years in Orange County conditions; the failure points show up at 10 to 15 years on the band seals and hardware if the rough opening wasn’t prepped right. The frame and glass usually outlast the seal, which is why the seal is the part to inspect first.
Often yes. A failed band seal at one opening, a lifting profile, or a worn hinge set can be repaired without replacing the window or door. What can’t be repaired is a failed insulated glass unit; that’s a replacement. We’ll tell you which one you have after a look, and the written quote will show the repair option before we recommend a full swap.
A single window or door swap is typically a one-day job once the replacement unit and parts are on site; profile and seal repairs at one opening are usually a few hours. Multi-opening jobs are scheduled on a written timeline, and we don’t leave the opening exposed overnight. Call (833) 954-5086 for an exact timeline on your job, and the estimate is free.
We order genuine Schluter profiles and membrane components through the manufacturer’s distribution network, matched to your measured reveal depth and model, and we source door hardware from the major manufacturers whose specs we can trace. We don’t carry parts on a truck and we don’t stock inventory; every part is ordered to your job so the size is right and the warranty is documented.
Call (833) 954-5086 for a free estimate. A live person answers around the clock, the price is written before work starts, and the install is covered by the 365-Day Done Right Promise. Bradford Remodeling Co Westminster works to The Garrison Standard on every job we take on.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












