







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Westminster Owner’s Guide
We install and finish Quikrete-based home additions and ADU (accessory dwelling unit) shells across Westminster, with typical installed pricing of $45,000-$130,000 for a home addition and $90,000-$220,000 for a full ADU build. If your project has hit a stopping point because a Quikrete element has failed, you’re not alone – most Westminster owners discover it when a crack runs up a poured wall, a slab edge starts to crumble, or a footing patch crumbles underfoot. That’s usually the moment the framing crew won’t come back until the concrete is corrected. We’re an independent contractor, not affiliated with Quikrete, and we install against the brand’s published specs for both structural concrete and repair products.
Which Quikrete Models This Applies To

Quikrete covers a lot of ground, and “Quikrete” is a family of products, not one bag. For additions and ADUs, the ones we see most in Westminster are Concrete Mix (the 80 lb. red bag), Fast-Setting Concrete, High-Strength Concrete Mix (5000 psi), Sand/Topping Mix, and the structural repair lines like Re-Cap and Vinyl Concrete Patcher. Each has a different psi rating and cure window, and they are not interchangeable once the wrong one has been poured.
Identifying the right product starts with the original label or the permit documentation. If the label is gone, we check the psi printed on the bag edge and the aggregate size (pea gravel vs. 3/8-inch vs. 1/2-inch). For a foundation pour, 4000-5000 psi mix is standard; for a topping or patch, you want the higher-solids repair line, not standard concrete mix.
OEM vs. aftermarket matters less here than specification match. Quikrete’s own published data sheets are the standard; an aftermarket equivalent that hits the same psi and cure profile will perform, but an off-brand bag labeled “concrete mix” without a spec sheet is a hard no on a structural pour. We source to the spec, not to the cheapest bag.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Home Additions & ADU Is Failing
Concrete doesn’t usually fail overnight. It telegraphs. Here is what Westminster owners report when they call us:
- Hairline cracks that grow sideways after a season. Usually a mix that was too wet at pour and shrank as it cured – a 4000 psi bag can lose 25% of its strength if water was added past spec.
- Crumbling edges at the slab or footing. Means poor consolidation or a freeze-thaw cycle; in Westminster, a January cold snap after a warm December is the culprit more often than not.
- Spalling on the surface where the first inch flakes off. Often a topping was laid too thin over a dirty substrate – 1 inch is the minimum for Quikrete topping mix over a properly prepped slab.
- Efflorescence – that white powder bloom. Usually moisture wicking through a footing from poor drainage, not a mix failure per se, but the fix is the same: cut back the water source.
- A step-down from old slab to new that keeps settling. The new pour went on native soil without compaction, or a footing was poured short. This is the one we see most on Westminster additions.
Replacement Cost & What’s Included

For a Westminster home addition, installed pricing runs $45,000-$130,000. For an ADU, $90,000-$220,000. The range depends on three things: (1) square footage and whether the existing structure has to be cut back, (2) footing depth and soil conditions, and (3) the Quikrete product line specified on the permit plan. A garage conversion sits lower, at $30,000-$80,000.
What’s included in a Bradford price: labor, Quikrete-spec materials, permit-ready documents, substrate prep, cure time, and cleanup. What’s not extra: change orders, re-pours, or “the spec changed” invoice bumps. Your written price is the price – that’s The Garrison Standard, and it’s been the rule on every Bradford job since the company joined the Garrison Partners family in 2004.
We work with documented material brands across the whole project: KraftMaid and Wellborn cabinetry if the addition includes a kitchen, Cambria and Caesarstone for counters. The Quikrete layer stays Quikrete-spec.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s an honest split here. An owner can safely pour a small non-structural pad (a shed base, a walkway patch) with the standard 80 lb. bag and a wheelbarrow. That work is within reach for a careful homeowner.
What an owner should not do: a structural addition footing, a load-bearing wall base, or any pour tied to a permit. Reason is simple – if the footing fails, the framing fails with it, and a failed inspection means the whole shell comes back down. Quikrete’s own installation guides specify substrate prep, compaction, and curing that a weekend pour usually skips.
If you’re past a patch and into a footing, call us at (833) 954-5086. Our technicians have up to 22 years of experience on this kind of work, and every Bradford project is covered by the 365-Day Done Right Promise – if the work fails within a year, we return and correct it at no charge.
FAQs

A correctly specified and cured Quikrete footing in a Westminster climate typically lasts 50+ years. The weak link isn’t the concrete – it’s the drainage. A footing that sits in standing water will spall within 5-10 years, so a proper grade and French drain matter more than the mix brand.
Sometimes. Surface spalling and hairline cracks can be patched with a topping mix or Vinyl Concrete Patcher. Structural cracks that follow through the slab or a footing step-down usually cannot – those need a re-pour. We’ll tell you which one you have on a free walkthrough. Call (833) 954-5086 to schedule it.
A Quikrete footing re-pour on a typical Westminster addition is 3-5 working days from cut-back to ready-for-framing, plus cure time. A full ADU footing pour runs 7-10 working days. That’s the concrete portion only; the framing, roofing, and finish timeline sits on top of that.
We source to the published spec on your permit plan – whether that’s High-Strength Concrete Mix, standard 4000 psi, or a repair line – and we verify the psi and cure profile before it hits the site. No gray-market bags. Specifications are traceable, and your written price locks to that spec before the first pour.
Ready to price your Westminster addition or ADU?
Call Bradford Remodeling Co Westminster at (833) 954-5086 for a free estimate. A live person answers 24/7 – no voicemail, no callback queue. You’ll get a written price before any work starts, background-checked technicians on every job, and the 365-Day Done Right Promise on any work we complete. Free estimate, no pressure, straight number.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












