







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Westminster Owner’s Guide
PGT kitchen remodeling in Westminster runs $14000 – $45000 installed, and every job starts with a written price before any work begins. Whether you’re replacing one failed component or rebuilding the whole room, we source PGT-compatible parts and materials, show you the line-item cost, and back the finished work with our 365-Day Done Right Promise. This page is written for the Westminster homeowner who already knows what failed and wants it matched to their PGT unit, priced straight, and fixed without a repricing at the door.
Most owners discover the problem the same way. A cabinet door stops closing flush, the counter seam lifts, or a finish fails after a wet winter. They read the PGT label, look up the part, and land in a parts catalog full of near-matches and discontinued lines. That gap is where we work best.
One note up front: Bradford Remodeling Co Westminster is an independent remodeling contractor. We are not affiliated with PGT, and we don’t claim to be.
Which PGT Models This Applies To

PGT builds to spec, not to a single universal standard, so the correct part depends on the series and on the build date stamped on the unit. What fits a label from one production year often won’t fit the next. The label is usually on the inside face of an upper cabinet, on the cabinet box side, or on the drawer box underside. Photograph it before you order anything; the model code, the size callout, and the finish code all live there.
Two things trip up Westminster owners most often:
- Cabinet hardware and hinge bore spacing. PGT cabinet lines have used more than one hinge bore pattern over time. A door labeled with the same series can still need a different plate if the bore centers differ by a few millimeters. Measure center-to-center, don’t eyeball it.
- Counter and surface edge profiles. The substrate and edge buildup vary by series. A replacement top or backsplash piece cut to a generic 1/2-inch substrate won’t seat on a thicker PGT deck without shimming, and shimming a wet zone will fail.
OEM is the safest match when the part is still in production. When it isn’t, a quality aftermarket equivalent with a published spec sheet is a reasonable substitute, but only if the spec sheet lists bore centers, finish code, and material thickness. We bring KraftMaid, Cambria, and Silestone into the conversation here, alongside PGT-compatible parts, so you have options with traceable manufacturer specs. Where the part is discontinued, we say so rather than sell a near-match and hope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
The failure usually shows up in one place and points to a cause somewhere else. Here’s what we see most in Westminster homes:
- Doors that won’t stay closed. A hinge plate has loosened in its bore or the bore itself has enlarged. Re-tightening a screw into stripped particleboard holds for weeks, not years.
- Cabinet boxes that rack or squeak when you lean on them. Fasteners have backed out of the substrate, or a back panel has separated from its cleat. It reads as a hardware problem and is usually a fastening problem.
- Counter seams lifting at the joint. The adhesive at the seam has failed, often after a wet winter and a hot, dry summer. Left alone, water wicks into the substrate and the repair gets larger.
- Finish peeling at drawer fronts and wet-zone edges. Southern California humidity swings plus dishwasher steam attack the finish at the edges first. Once the edge lifts, more follows.
- Drawers that bind or drop on one side. A slide has failed or the cabinet side has swelled out of plane. Binding is the symptom; moisture in the substrate is often the cause.
Every one of these is fixable without tearing the kitchen apart, but only if the cause is matched to the part. That’s the work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Westminster, installed, with the labor in the number:
| Work | Installed Range |
|---|---|
| Kitchen remodel (full) | $14000 – $45000 |
| Small kitchen remodel | $9000 – $20000 |
| Cabinet installation | $4000 – $13000 |
| Countertop installation | $2000 – $6500 |
| Backsplash installation | $800 – $2500 |
| Kitchen island installation | $3000 – $10000 |
The range moves on cabinet count, whether the substrate is sound, and whether the layout changes. A straight part-for-part swap sits at the low end; a layout that needs a rough-in change lands at the top. Every price comes as a written line-item before work starts, with the parts and labor broken out so you see what you’re paying for. If it fails within a year, our 365-Day Done Right Promise brings us back to correct it at no charge. Same roster of premium materials applies across bathroom and whole-home work if the kitchen project grows.
DIY or Call Us?
You can safely check and document. Photograph the PGT label, measure hinge bore centers and substrate thickness, note the finish code, and confirm the model year. None of that puts you in harm’s way, and all of it makes the quote faster.
Where DIY goes wrong is the install itself. Cutting a replacement counter to a generic profile and forcing it onto a non-standard PGT deck cracks the piece or leaves a seam that leaks. Driving fasteners into a failed substrate makes a small repair into a larger one. There’s also a safety angle a homeowner should hear plainly: if the work involves cutting into a wall to address a rough-in, check for electrical and gas lines first, and don’t open a panel to do it yourself. Call a qualified professional, and we’ll tell you honestly if the job is beyond what we should touch.
If you want a straight answer on price, call (833) 954-5086.
FAQs

Well-installed cabinets, counters, and finishes commonly hold 15 to 25 years in Southern California, though Westminster’s humidity swings stress seals and finishes faster than a dry-climate market. Repairs to hardware and seams can buy years at a fraction of the replacement cost. Call (833) 954-5086 for an honest read on whether a repair or a replacement makes sense for your unit.
Often, yes. A failed hinge, drawer slide, or lifting seam is usually a repair, not a replacement, when the substrate behind it is still sound. The moment water has reached the cabinet box or the counter deck, replacement typically wins on cost. Call (833) 954-5086 and we’ll tell you which side of that line you’re on.
A single-part swap runs a few hours to a day, while a full cabinet or counter replacement runs several days depending on scope and material lead time. We put the time estimate in writing with the price before we start, so there are no surprises mid-job. Call (833) 954-5086 to book a free estimate.
We start with your label and use the model code and finish code to match the part, going OEM where it’s still in production and to a documented equivalent where it isn’t. Manufacturer spec sheets come with it, so the match is traceable and the warranty on the part is real. Call (833) 954-5086 and bring your label photo; the more you can show us, the faster the match.
Ready to price it? Call Bradford Remodeling Co Westminster at (833) 954-5086 for a free estimate. A live person answers, 24 hours a day, seven days a week. You’ll get a written price before any work starts, background-checked and uniformed technicians on the day, and the 365-Day Done Right Promise on the finished job. We’re part of the Garrison Partners family, independently owned and operated, and held to The Garrison Standard on every Westminster project.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












