







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Westminster Owner’s Guide
If your PGT driveway or paver system needs a failed section replaced, we install PGT-compatible pavers, base and edge restraint in Westminster, and a typical paver driveway installation runs $7,000 – $18,000 depending on square footage, base depth and paver selection. Driveway sealing, the smaller fix most owners start with, runs $250 – $700. We’re an independent contractor, not affiliated with PGT.
Most homeowners here don’t find the problem on a schedule. They find it after a wet winter, when a paver section has heaved or a joint line has opened, or when a hairline crack in a concrete or asphalt driveway turns into a lip you catch a tire on every morning. That’s usually the moment the search starts: what’s the right PGT replacement, what does it cost in Westminster, and who installs it straight.
Key Takeaways
- Paver driveway installation in Westminster: $7,000 – $18,000 installed. Driveway replacement: $5,000 – $14,000. Sealing: $250 – $700.
- The part that fails first is almost never the paver itself; it’s the base and the edge restraint under it.
- Our technicians have up to 22 years of experience with hardscape and driveway work.
- Every price is written before any work starts, and every completed job carries the 365-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which PGT Models This Applies To
Westminster driveways sit on a mix of older track-home slabs and post-war lots, and the failure pattern depends on what’s under the surface, not just the paver stamp. PGT offers paver profiles in several thicknesses and face styles, and that matters more than the color: a standard 60mm paver is built for pedestrian and light-driveway traffic, while a 2 3/8-inch (roughly 60mm) or thicker drive-rated unit handles the vehicle loads. If you’re matching an existing installation, get the actual thickness and face dimensions off a single loose paver, not the color name off a sample board. A 6×9 paver and a 6×12 look the same on a photo and won’t lay into the same field.
Compatibility gotchas specific to PGT: profile names repeat across series, and the same face style can come in both a drive-rated and a patio-rated thickness. The label on the pallet or the spec sheet, not the visual match, is the deciding document. On the OEM-versus-aftermarket question, we’d tell you straight: a PGT paver matched to the correct profile and thickness is the reliable route for a repair that has to blend with what’s already down. For a full replacement, a name-brand drive-rated paver from the documented manufacturer set (we also install Belgard and Unilock hardscaping) can perform to the same spec if the base is built right. The paver is the visible part. The base is what holds.
Signs Your PGT Driveway & Pavers Is Failing
- Heaving or rocking pavers. Usually a shallow or saturated base, often under a downspout or the low corner of the driveway where Westminster rain pools. One rocking paver is a base problem showing at the surface.
- Open joint lines and sand washing out. Water moving through the joints instead of off the surface. Left alone, the sand loss undercuts the pavers and the settling spreads.
- Edge restraint letting go. The border course spreads outward and the field pavers follow it. This is the single most common cause of a driveway “failing” that’s really a $200 edge fix turning into a re-lay.
- Efflorescence and white haze that returns after cleaning. Moisture trapped under the pavers. It’s cosmetic until the base stays wet, then it isn’t.
- Cracks, lips and settled sections on concrete or asphalt. Usually a slab that cracked at a control joint or a subgrade that wasn’t compacted. A lip you catch a tire on is a trip-and-tire hazard, and the fix is under the surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is the honest Westminster pricing, and it’s the same whether you’re pricing a repair or a full install. What drives the number up is square footage, base depth (a Westminster driveway over an older slab or expansive soil needs more excavation and compacted base), drainage correction, and the pavers you choose. What we don’t do is reprice at the door. Every job gets a written, line-item price before any work starts.
| Service | Installed Price Range (Westminster) |
|---|---|
| Paver driveway installation (PGT-compatible) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
The installed price covers excavation, compacted base, edge restraint, the pavers, and clean-up at close. That last one matters: a squared-away job ends with a clean site, a documented scope and your signed written guarantee in hand. Every completed driveway carries the 365-Day Done Right Promise, which means if the work fails within the guarantee period – a section heaves or a joint opens – we come back and correct it at no charge.
DIY or Call Us?

What you can safely do yourself: walk the driveway after a rain and photograph where water stands, mark which pavers rock underfoot, and check whether the border course has moved. Get a loose paver’s thickness and dimensions. That’s information, and it makes the estimate faster. What you shouldn’t tackle is the base. A driveway that heaves is a base that failed, and re-setting the pavers over that base just buys you another wet season. Rebuilding base, compacting it and setting edge restraint takes real equipment and a compaction schedule, and getting it wrong is how a homeowner spends twice.
Call (833) 954-5086 for a free estimate, and we’ll tell you straight which sections need a repair and which need a rebuild. A live person answers, day or night.
FAQs
A properly installed drive-rated paver over a compacted base will typically hold 20 to 30 years, and often longer. The realistic lifespan is a base-and-drainage question, not a paver question. Westminster soil and heavy winter rain shorten the life of a shallow base fast. Call (833) 954-5086 for an exact quote – estimates are free.
Often yes, if the failure is localized – one settled section, a failing edge course, a downspout washout. We lift the affected pavers, rebuild the base under that slice, and re-set. If the whole base has failed, a repair won’t hold. That’s the honest call we’ll make for you in writing.
Sealing is a day. A localized paver repair is one to two days, with curing time before traffic. A full paver driveway install for a typical Westminster home runs several days, depending on excavation, base and drainage work. You’ll have the schedule in writing before any work starts.
We order the paver to the profile and thickness confirmed off your existing paver or the spec label, not off a color card, and we work from documented manufacturer specifications. It’s the same discipline we apply across our other name-brand materials – Belgard and Unilock hardscaping, KraftMaid and Cambria in kitchens, for example. Because we’re an independent provider and not affiliated with PGT, we’ll tell you plainly when an aftermarket paver is the equal and when it isn’t. Call (833) 954-5086 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












