







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Westminster Owner’s Guide
For a bathroom remodel in Westminster built around a PGT window or door already in the room, budget $9,000 – $28,000 installed, with a small bathroom landing between $5,000 and $12,000. The PGT side of the job is usually a window or patio-door rough-in that has to be re-flashed and re-sealed to California residential code before tile goes back on, and that is where we spend most of our planning time. Most Westminster homeowners find out something is wrong during a remodel tear-out: the window sill was never shimmed to drain, the old sealant has gone chalky, or the frame has been leaking into the wall cavity for years behind drywall that looked fine.
Which PGT Models This Applies To

PGT makes several window and door lines that show up in Westminster bathrooms: WinGuard impact windows (common in homes built after the 1990s because of the coastal and wind requirements in Southern California), aluminum and vinyl single-hung and casement lines, and patio doors. The label is your starting point. On most PGT units it’s a silver or white sticker on the jamb or inside the frame with the series, size and glass code. If the label is gone, measure the visible glass width and height, note whether the unit is a single-hung (bottom sash slides up), a casement (crank-out, hinge on one side) or fixed, and photograph the frame where it meets the wall. That photograph tells us more than any label.
OEM vs. quality aftermarket is a real decision here. PGT-specific hardware, sash balances and weatherstrip are the surest fit for older series, but they can run two to four weeks out. A quality aftermarket unit or replacement sash that matches the rough opening often installs faster for less money. We quote both, give you the trade-off in writing, and let you pick. Bradford Remodeling Co Westminster is an independent contractor and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
- Water staining on the sill or drywall below the window. The perimeter seal has failed, and Westminster’s wet winters push water into the wall cavity before you ever see a drip inside. The right fix is re-flashing, not a fresh bead of caulk.
- Chalky, cracked sealant at the frame. California sun bakes sealant joints hard within five to seven years. Once it loses flexibility, water gets behind it and the substrate soaks.
- A sash that sticks, drops or won’t stay up. The balance or spiral spring has worn. On a tilt-in sash this is often a parts fix, not a whole-unit replacement, which changes the price significantly.
- Draft or fogging between the panes. The insulated glass unit (IGU) has lost its seal. In a bathroom, constant steam speeds this up, and the whole IGU gets swapped rather than the frame.
- Mold or musty smell at the base of the wall. Leakage has reached the framing and the substrate behind the tile. This is the one that turns a window job into a rebuild of the wet wall, and we plan for it before anyone starts swinging a hammer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what the work actually runs in Westminster, installed, with a written price before anybody touches a tool:
- Full bathroom remodel (PGT window or door included): $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives the range: the size and condition of the wet wall, whether the PGT unit can be reused with new hardware or has to be replaced entirely, whether the substrate behind the tile is sound, and how much tile coverage you want. Parts and labor are broken out as separate line items so you can see exactly what the window work costs versus the bathroom finishes. Every completed project carries the 365-Day Done Right Promise: if it’s not done right, we come back and correct it at no charge within the full year.
DIY or Call Us?
There are two things a homeowner can safely check on a PGT bathroom window: run a length of painter’s tape along the sill and see if water pools, and press a finger into the interior sealant to see if it’s still flexible. Beyond that, the working parts are mostly hidden or dangerous. Nothing on a PGT unit carries the kind of high-tension spring a garage door does, but replacing a sash balance or an IGU involves releasing the sash, handling glass, and re-sealing a waterproof perimeter, and a bad re-seal is what turns a $400 job into water damage in the wall cavity.
If the sill is showing water, the frame is loose, or the glass has fogged between the panes, call us. A live person answers the phone around the clock. Call (833) 954-5086 to schedule a free estimate; we’ll put a written price in your hand before any work starts.
FAQs

How long does a PGT bathroom window last in Westminster? Typically 20 to 30 years for the frame, with the insulated glass unit failing first at 10 to 15 years under bathroom steam. Sealant joints need re-doing every 5 to 7 years. Call (833) 954-5086 for an exact quote on replacement, and estimates are free.
Can a failed PGT sash be repaired instead of replaced? Yes, often. If the frame is sound and only the balance, weatherstrip or IGU has failed, a parts repair usually costs a fraction of a new unit. Call (833) 954-5086 and we’ll tell you which is the better value in writing.
How long does the swap take during a bathroom remodel? A window swap is typically a one-day job inside a larger bathroom remodel, and the full bathroom remodel runs one to three weeks depending on tile and shower scope. Call (833) 954-5086 for a written schedule on your job.
How does Bradford source PGT parts? Through named PGT-compatible suppliers and through the same documented brand roster we use across the shop, which includes KraftMaid, Cambria and Silestone on the finishes side. We specify exactly what part goes in, and you see it on the written quote. Call (833) 954-5086 to schedule a free estimate. Bradford Remodeling Co Westminster serves Westminster and the surrounding area, and every project is backed by a live-answered phone and the 365-Day Done Right Promise.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












