







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Windows & Doors: The Westminster Owner’s Guide
We install Oldcastle-compatible windows and doors throughout Westminster, and most full window replacements run $4,500 – $15,000; impact-rated window installation runs $8,000 – $25,000, depending on how many openings you’re doing and the frame material. Single units that only need a sash, glass, or hardware swap are quoted individually with a written price before anything starts. Most orders for standard-size Oldcastle units are ready to schedule within a few weeks of measure. City inspectors here require the permit pulled before the swap begins, so we build that into the schedule.
Westminster owners usually find out something’s wrong the same way: a horizontal slider that won’t latch, a fogged pane that won’t clear, or a door that suddenly drags on the sill after a hot week. By the time you notice, the weatherstripping or the seal has already been gone for a while. Here’s what to do about it, without guessing.
Key Takeaways
- Full window replacement in Westminster: $4,500 – $15,000; impact windows: $8,000 – $25,000.
- Most Oldcastle failures trace to one of five parts, not the whole unit.
- A single sash or glass swap is often the honest fix; we’ll tell you when it isn’t.
- Written price before work starts; every install carries the 365-Day Done Right Promise.
Which Oldcastle Models This Applies To

Oldcastle builds for a lot of private-label programs, so the sticker on the glass often carries a different name than the one on your paperwork. The parts we see most in Westminster come from single-hung and horizontal slider series (the kind set in stucco with a nail-fin flange), plus the patio door lines that run on a bottom track. To identify what you have, look for the manufacturer label etched into the corner of the glass, then measure the visible glass width and height and the frame depth at the sill. A photo of the label plus those three numbers is what we need to match a part.
Here’s the gotcha nobody tells you: Oldcastle changed its sash balance and roller part numbers across series years, and the older balances are no longer stocked by most suppliers. A “fits Oldcastle” listing online often fits a different series than yours. We match on the actual part, not the brand name, and we’ll quote you either the OEM-equivalent or a quality aftermarket match so you can see the price difference in writing. We’re an independent service provider; we’re not affiliated with Oldcastle, so we’re not locked into one sourcing path.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Windows & Doors Is Failing
- Fog or condensation between the panes. The insulated glass seal has failed, letting moisture into the air space. A single fogged pane can be replaced without touching the frame; once half the house is fogging, the units are at end of life.
- A sash that won’t stay up or drops when you let go. The spiral balance or block-and-tackle balance has lost tension or snapped. This is a cheap part, but the balance must match your sash weight and series or it’ll fail again in a season.
- A slider that drags or won’t latch. The bottom rollers have flat-spotted or the track is packed with grit. Worn rollers are the usual culprit, not the whole door or window.
- A patio door that leaks at the sill after rain. The sill sweep or weatherstripping has cracked, or the weep holes are clogged. Water sitting on the track is what rots the substrate underneath.
- A sticking or hard-latching door. The latch or multipoint hardware is out of adjustment or the hinges have sagged. Left alone, the misalignment wears the latch plate and the strike.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Westminster, plan on $4,500 – $15,000 for a full window replacement and $8,000 – $25,000 for impact-rated windows. What drives the range: the number of openings, the frame material, and whether the old unit comes out clean or the rough opening needs to be reframed. Here’s how a written quote reads:
- Glass or sash only: quoted per unit, part plus labor in one line.
- Full unit replacement: removal, new unit, flashing, sealant, and touch-up in one price.
- Permit and inspection: itemized, pulled under our name, not left to you.
Every installed window and door carries the 365-Day Done Right Promise: a written guarantee that if the work fails within a year, we come back and correct it at no charge. We also work across the rest of the house on KraftMaid, Cambria, and Silestone projects, so if a window swap turns into a bigger job, it’s one crew, one price sheet.
DIY or Call Us?
You can safely check a few things yourself: confirm the glass label, run a straightedge along the sill to spot a low spot, vacuum the weep holes and track, and wipe the weatherstripping with a damp cloth to see if it’s cracked. What you shouldn’t do alone: replace a sash balance under tension, reseal or reframe a unit set in stucco, or pull an old impact pane. Those involve springs under load and a wall opening that can let water in if the flashing isn’t right. The honest split is simple. Check the small stuff, and let a trained tech handle anything that holds tension or opens the envelope. Call (833) 954-5086 and we’ll tell you which side of that line your job sits on.
FAQs

Expect 20 to 25 years for the frame and hardware, and about 15 for the glass seal; the coastal marine layer and inland heat swings here tend to fog the glass before the frame gives out. Call (833) 954-5086 for a no-cost inspection if yours are in that range.
Usually yes if the frame is sound and only one part has failed. A fogged pane, a worn roller, or a weak balance is a repair, not a replacement. If the frame is bowed or the sill is rotted, a full swap is the honest call, and we’ll show you why on site.
A single sash or glass swap is often a same-visit job; a full window replacement across a typical house runs one to three days, with permits pulled and inspections passed before we close out. You’ll get the timeline in writing with the price.
We match the part to your series and sash weight using the glass label and your measurements, then quote the OEM-equivalent and a quality aftermarket match side by side. Write the choice into the price sheet, and it’s the number you pay, with no surprises at the door.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












