







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Westminster Owner’s Guide
We install and service Moen products on driveway and paver projects across Westminster, and a full paver driveway installation typically runs $7,000 – $18,000, with sealing at $250 – $700 and driveway replacement at $5,000 – $14,000. Because this is planned hardscape work, we schedule it – we don’t promise same-day installs, and you’ll get a written price before anything starts. Most Westminster owners discover the problem the same way: a paver surface that has started to sink, rock, or pool water, drainage hardware that has stopped seating right, or a finish stain near an outdoor Moen fixture that keeps coming back no matter how often it’s cleaned. That’s usually when the referral calls begin.
Which Moen Models This Applies To
Moen’s outdoor and fixture line covers a lot of ground, and the parts don’t cross over cleanly. Before you order anything, match against the model or series number stamped on the product itself or on its install tag – not the box it came in, which is often long gone. Outdoor Moen fixtures and drainage assemblies are sold in distinct series, and a cartridge or trim kit bought for one series will not seat in another even when the packaging photo looks identical. If the label is missing, measure the fitting and the mount spacing by hand; that measurement is the real compatibility check, and it beats a product photo every time. On the OEM-versus-aftermarket question: genuine Moen parts carry the manufacturer warranty and the exact spec, while a quality aftermarket equivalent can work for a standard grade but often skips the tolerance that higher-end outdoor fixtures depend on. For anything exposed to Westminster’s coastal air and sun, we lean OEM. We also work with KraftMaid, Cambria, and Silestone on the interior side of whole-home projects.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Driveway & Pavers Is Failing
Here’s what we actually see when we get out to a Westminster driveway, and what’s behind each symptom.
- Pavers that rock or sink at the edge. The base layer has settled or the edge restraint has let go, so the surface loses its lock. Moen fittings sit on top of that movement and start to strain.
- Pooling water that wasn’t there before. Drainage hardware – the Moen component most likely to clog or misseat in an outdoor setting – is no longer directing runoff correctly. Westminster’s flat lots and heavy winter rain expose this fast.
- A stain or residue that keeps returning near a fixture. A failed fitting or seal is leaking slowly under the surface. The stain is the tell, not the problem.
- Visible cracking or a shifting joint line. Usually a base or compaction failure under the surface, worsened by our summer heat cycling the slab or pavers.
- The fixture no longer seats or tightens cleanly. The mount or trim has worn, which is a fitment issue – replacing the part without fixing the seat means it fails again.
Replacement Cost & What’s Included

Installed pricing in Westminster for the driveway and paver work that carries these Moen components:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway replacement: $5,000 – $14,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
The range comes down to square footage, base prep depth, how much existing surface has to come out, and whether the fixture or drainage hardware needs the base reworked to seat properly. The written price you get before work starts separates parts from labor line by line, so you see exactly what the Moen component costs and what the install costs. Every completed job carries the 365-Day Done Right Promise – if the work fails within a full year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: confirm the model number, measure the fitting, note where water pools, and photograph the failing joint. What we don’t recommend is pulling up pavers or reworking a base to chase a drainage or fitment problem on your own – lifting a paver set can break the edge lock, and resetting a fixture without fixing the base underneath just moves the failure a few months down the road. That’s where the real time and money go. A written estimate tells you whether it’s a sealing-level fix or a base rework before you spend a Saturday. Call (833) 954-5086 to schedule your free estimate, and a live person answers – not a voicemail.
FAQs

How long does Moen outdoor hardware last on a Westminster driveway?
Expect several years of solid service, but Westminster’s salt air and strong summer sun shorten that compared with inland areas, so fittings and finishes wear faster here. The right install and a proper base make the biggest difference to lifespan.
Can the part be repaired instead of replaced?
Often yes – if the base and seating are sound, the fitting or trim alone can be swapped. If the surface has shifted underneath, replacing the part alone won’t hold. We’ll tell you which one you’re looking at in the estimate.
How long does the swap take?
A single fitting or trim replacement is usually a short visit; a drainage or base rework that requires lifting pavers takes longer. We give you the timeline in writing with the price before work starts, so there are no surprises at the door.
How do you source the part?
We match your model or series number to the correct genuine Moen part – OEM when the outdoor exposure calls for the exact spec, a quality equivalent only where it makes sense. We don’t stock parts or carry them on a truck, so the part is ordered against your confirmed model.
Will the price change once work starts?
No. You get a written, no-hassle upfront price before any work begins, and it doesn’t move at the door. If the scope changes, we put it in writing and you approve it first.
Are you affiliated with Moen?
No. Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with Moen. We install and service Moen products as part of our documented brand roster, alongside names like Belgard for hardscaping.
Get Your Westminster Driveway Squared Away
Every Bradford job starts with a written price and ends with a signed written guarantee in your hand and a clean site. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and every completed project is covered by the 365-Day Done Right Promise. Bradford Remodeling Co Westminster is part of the Garrison Partners family, held to The Garrison Standard. Call (833) 954-5086 for a free estimate – we answer around the clock.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












