







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Westminster Owner’s Guide
We build KraftMaid-compatible home additions and ADUs in Westminster, and a finished, permitted addition typically runs $45,000 – $130,000, while a full detached or attached ADU runs $90,000 – $220,000. KraftMaid cabinetry is what most of our Westminster clients specify for the kitchenette, wet bar or secondary kitchen these projects add, and it’s engineered to factory dimensions, which matters once walls move. Owners usually land on this page after something already went wrong: a cabinet box that won’t sit plumb against a new wall, a KraftMaid door that won’t stay adjusted, a drawer that rubs because the opening it was built for is out of square. This guide covers the parts side of that work, honestly and in plain terms.
Key Takeaways
- Addition and ADU pricing in Westminster starts at $45,000 for an addition and $90,000 for an ADU.
- KraftMaid is a factory-built cabinet line; its parts are sized to spec, so the framing and wall it mounts to has to be true.
- We’re an independent remodeling contractor. We are not affiliated with KraftMaid, and we don’t sell KraftMaid parts.
- Every project gets a written price before work starts and the 365-Day Done Right Promise on the finished work.
Which KraftMaid Models This Applies To

KraftMaid builds cabinetry in several collections, and the part you need depends on which one is in your kitchenette or ADU galley. The lines you’ll see most in Southern California homes are the framed and full-access (frameless) constructions, and the two take different hinges, different drawer glide systems and different filler and panel profiles. A frameless box uses full-overlay concealed hinges and a different mounting plate than a framed box. Order the wrong one and it won’t seat, or it will seat and rub.
Find your model from the label. KraftMaid places a spec label inside the cabinet box, usually on the back panel or the inside of a side wall. It lists the collection, the door style, the box dimensions and the finish. Photograph it before you call anyone, including us. If the label is gone, measure the opening, the door height and the overlay (how much door covers the frame), and photograph the hinge itself. That’s enough to match a part.
The OEM-versus-aftermarket call for KraftMaid is straightforward. For door fronts, drawer boxes, hinges and glide hardware, factory or factory-spec parts are worth the wait, because the finish and the bore pattern have to match a box that’s already installed. For interior organizers, soft-close dampers and shelf hardware, quality aftermarket equivalents are fine and cost less. We specify KraftMaid, Wellborn, Cambria, Silestone and Kohler across our projects, so we know what the factory tolerances actually are, and we’ll tell you when a cheaper equivalent is the right answer. Call (833) 954-5086 with your label photo and we’ll tell you what you’re looking at.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Home Additions & ADU Is Failing
An addition doesn’t fail the way a roof fails. It fails at the joints, and the KraftMaid cabinetry inside it is often where a homeowner first notices. What follows are the symptoms we see most in Westminster.
- Doors that drift out of alignment every few months. Springs in the concealed hinge lose tension or the mounting plate works loose from the cabinet side. Re-tightening helps for a while; eventually the plate has wallowed the screw hole and needs a proper repair, not another turn of the screwdriver.
- Drawers that rub or bind on one side. The glide is worn, or the drawer box is out of square because the humidity swing inside a new addition is bigger than the old house ever saw. Westminster’s marine air keeps interiors in the 50 – 70% relative humidity range most of the year, and a KraftMaid box that was installed before the addition was properly conditioned will swell and drag.
- A cabinet run that’s no longer plumb or level. This is the tell that the framing moved. Additions settle, and a kitchenette built onto a wall that wasn’t shimmed right will rack. No hinge or glide in the world fixes a racked box.
- Water staining at the toe kick or the back panel. Usually a plumbing rough-in behind the cabinet, or a wet-bar drain that wasn’t properly sloped. The cabinetry is the messenger here, not the problem.
- Finishes checking or peeling on the door fronts. KraftMaid finishes are factory-applied and hold up well, but a door that sits directly in a sunny ADU window line will show it. That’s a replacement door, not a touch-up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The honest answer for a Westminster addition or ADU is a range, because the number depends on square footage, whether you’re building attached or detached, and what goes inside. The floor is $45,000 for an addition and $90,000 for an ADU, and the ceiling is $130,000 and $220,000 respectively. For a garage conversion, which is the most common way we see homeowners get an ADU in Westminster, the range is $30,000 – $80,000. If the project includes a full kitchen, the kitchen remodel inside the addition adds $14,000 – $45,000; a small kitchen or kitchenette runs $9,000 – $20,000; and the KraftMaid cabinet installation itself is $4,000 – $13,000.
What drives the range: foundation type, whether the soil needs over-excavation, roof tie-in, window and door count, electrical panel capacity, and the level of finish. What’s always included: a written price before any work starts, permits pulled and inspected, and the 365-Day Done Right Promise on the finished work. That promise is a written guarantee: if the work fails inside the first year, we come back and correct it at no charge. No-hassle upfront pricing is standard here, not an upgrade, and the number on the page is the number on the invoice. Call (833) 954-5086 for a free written estimate.
DIY or Call Us?
Here’s the honest split. If a KraftMaid door is out of alignment, you can safely check the hinge screws with a screwdriver and confirm whether the plate is loose. You can photograph a spec label. You can measure an opening. That’s diagnostic work, and it’s useful to do before you call anyone.
What goes wrong when homeowners go further: swapping a concealed hinge without matching the mounting plate, replacing a drawer box with a slightly oversized one, or trying to shim a cabinet run against a wall that’s already racked. A racked box needs the wall corrected, not the cabinet. And once a job involves new framing, electrical, plumbing or a structural tie-in, it’s permit work. Electrical rough-in, gas lines and foundation work are genuinely dangerous and need a licensed trade, not a weekend. Do the check, then call us at (833) 954-5086 and we’ll tell you whether what you’re looking at is a hinge or a wall.
FAQs

A factory-concealed hinge on a KraftMaid cabinet typically lasts 15 to 20 years under normal use, though a door on a heavy daily-use cabinet will show wear sooner. Drawer glides go 10 to 15 years. In an addition or ADU used as a rental, expect the shorter end of both ranges because of the daily cycle count.
Often, yes. A drifted door can be re-aligned and a loose plate can be re-seated with proper repair hardware. A worn damper or a single hinge can be replaced without touching the rest of the cabinet. What can’t be repaired is a racked or swollen box, and that’s when replacement is the right call.
A hinge, glide or drawer box swap is usually an hour or two, scheduled as part of a larger visit. A full cabinet run replacement inside a finished addition takes a day or more depending on door count. On planned construction like a new addition, we give you the schedule in writing, not a same-day promise we can’t keep.
We identify the KraftMaid collection and door style from the spec label, confirm the part against factory specs, and order it. We don’t carry parts, and we’re not a KraftMaid dealer. We’re an independent remodeling contractor, and we specify KraftMaid, Wellborn, Cambria, Silestone and Kohler across our projects. Every completed project carries the 365-Day Done Right Promise.
Every project we take on in Westminster is priced in writing before a single tool comes out, backed by background-checked, uniformed technicians, and answered by a live person 24/7 at (833) 954-5086. Plan on a free estimate. That’s the step before anything gets built.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












