







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Westminster Owner’s Guide
We plan and build Kohler-spec home additions and ADUs in Westminster, and most complete projects land between $45,000 and $130,000, with ADU construction running $90,000 to $220,000. The “part” that fails on this kind of project is almost never a Kohler fixture itself. It’s the rough-in and waterproofing underneath it, and owners find out when a tile floor near the new bathroom goes soft, a shower niche starts weeping, or the supply stub in a Kohler-walled bath shows a slow drip a year after the tile closed up. In Westminster we see that failure pattern most in additions built over the older 1950s and 1960s slabs around Midway City and the Westminster Boulevard corridor, where the existing drain lines are undersized for a second bath and a Kohler shower valve gets blamed for a problem that starts two feet downstream.
Which Kohler Models This Applies To

Kohler parts are model-specific in ways that trip up homeowners shopping by photo. A Kohler shower valve trim that fits a Rite-Temp K-8304 series rough-in will not seat on a K-2971-KS, and Kohler has changed cartridge designs across its faucet lines more than once, so the model number stamped on the escutcheon or under the spout is the only reliable identifier. Find it before you buy anything. Kohler stamps the model on the valve body, the faucet shank, or a tag inside the cabinet, and the rough-in number matters more than the trim; a new cartridge or trim that claims “fits Kohler” and lists six model families is usually the wrong one for your specific valve.
On additions and ADUs, the compatibility question is broader than the fixture. Kohler toilet rough-ins want a 12-inch rough standard, with 10-inch and 14-inch variants for tight walls, and a Kohler Memoirs or Irvine suite ordered for an ADU bath needs the drain centered to that measurement before the slab is poured. Get it wrong and you’re moving a drain through cured concrete. We install Kohler fixtures in every addition, alongside KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and other documented brands, so the spec sheet is traceable from the rough-in to the trim. On the OEM-versus-aftermarket call: we use Kohler OEM parts for valves and cartridges because the aftermarket equivalents in this category have a real fitment and lifespan problem. We are an independent contractor serving Westminster and are not affiliated with Kohler.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
- Soft or hollow-sounding tile near the new bath. That’s a substrate or waterproofing failure, usually a missed pan liner or a curb that was framed rather than built to slope. Kohler’s shower base doesn’t cause it, but it hides it.
- Kohler valve drips or won’t shut off cleanly. A failed cartridge or a rough-in that was installed without flushing the line first, which sends debris through the seat and scored the ceramic disc.
- Toilet rocks or the wax seal weeps. Often a flange set below finished floor height after the addition’s slab was raised. Kohler’s standard 12-inch rough assumes a flange at the right elevation.
- Faucet flow drips at the spout after shutoff. Worn cartridge, sometimes water hardness buildup inside the Kohler ceramic valve. Westminster water runs hard enough that a cartridge that should last 10 years can start to hang at 6.
- Damp or mildew smell in the ADU bath, no visible leak. A missing exhaust rough-in or a vent that terminates inside the addition’s attic space. The Kohler fixtures are fine; the bath can’t breathe.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Westminster, a full home addition runs $45,000 to $130,000 and an ADU build runs $90,000 to $220,000. The page’s real focus is close to a Kohler fixture swap inside that scope: a valve cartridge replacement, a Kohler shower base reset, or a drain-flange correction typically lands in the $450 to $1,400 range depending on whether tile has to come up. That’s parts plus labor, both line-itemed on the written quote before we start. The page’s broader range moves on three things: addition size, whether the foundation is a slab or raised, and how much of the existing bath plumbing has to be rerouted to hit Kohler rough-in dimensions. Every project gets The Garrison Standard, which means a written price before a tool comes out and no numbers that move at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge, and you hold a signed written guarantee at close.
DIY or Call Us?
You can safely do the diagnostics: find the Kohler model number on the escutcheon, check flow at a second fixture, look for water staining on the ceiling below the new bath, and confirm the toilet flange depth against your finished floor. Those checks are free and they narrow the problem fast. What goes wrong with DIY is the work that’s behind the wall or under the slab, and that’s where a cartridge that feels loose in the rough-in often means a cracked valve body, not a bad O-ring, and a homeowner who replaces the cartridge twice and still has a drip. Any electrical or gas work feeding the new addition, and any rough-in change, belongs with a trained professional; we won’t walk you through those because the failure mode is serious. Background-checked, uniformed technicians do the work, and a live person answers the phone 24/7, not voicemail. Call (833) 954-5086 for a free estimate and we’ll tell you straight whether it’s a $250 cartridge or a rough-in correction.
FAQs

A Kohler ceramic cartridge typically lasts 10 to 15 years, but in Westminster’s hard water we tell owners to expect the lower end, closer to 8 to 10, and the rough-in and waterproofing underneath should outlast the fixture by decades if it was built right. If you’re getting less than that, the problem is usually the install, not the Kohler part. Call (833) 954-5086 for an exact quote on a diagnostic – estimates are free.
Yes, in most cases. A dripping Kohler valve is usually a cartridge, not a new valve body, and a rocking toilet is often a flange extension plus a fresh wax ring rather than a new Kohler base. We check the model and the rough-in before we quote a replacement, because we’d rather fix the actual cause. Call (833) 954-5086 and we’ll tell you which it is.
A Kohler cartridge or faucet swap runs 1 to 3 hours. A shower base reset or drain-flange correction inside the addition’s bath typically takes a day to a day and a half, with a return visit if tile has to be matched. A full addition is a multi-week project and we’ll give you a dated written schedule up front. Call (833) 954-5086 for a free estimate.
We source through documented supply channels with the manufacturer model and rough-in number in hand, so the part number on the box matches the one on your valve. No guessed cross-references, no “universal fits” parts that claim to fit six Kohler families. The part number and price are on the written quote before we order. Call (833) 954-5086 to schedule your free estimate.
If you’re in Westminster and the addition or ADU has a Kohler fixture that’s misbehaving, the smartest first move is a written diagnosis with a real number on it. We give you the price before any work starts, every time, under The Garrison Standard. Call Bradford Remodeling Co Westminster at (833) 954-5086 for a free estimate. Live person, 24/7, and no surprise line items at close.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












