







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Home Additions & ADU: The Westminster Owner’s Guide
We build and finish home additions and accessory dwelling units (ADUs) in Westminster using James Hardie fiber cement siding and trim, and a full addition typically runs $45,000 – $130,000 installed, while a detached or attached ADU runs $90,000 – $220,000. These are planned builds, not same-day work: the estimate comes in writing before we start, and construction runs on a documented schedule. Owners usually land on this page for one of two reasons. Either a James Hardie-clad addition or ADU on the property is failing at the lap siding, trim, or flashing joints and needs a real repair plan. Or they’re planning a new addition in Westminster and want the exterior done in a product that holds up to the local marine layer and dry summers. Either way, the material matters more than most homeowners expect.
Bradford Remodeling Co Westminster is an independent remodeling contractor. We are not affiliated with, endorsed by, or a dealer of James Hardie products. We install James Hardie siding and trim as one of the documented brand materials on our roster, and we hold the work to The Garrison Standard.
Key Takeaways
- James Hardie fiber cement is engineered for wet-dry cycling, which suits Westminster’s coastal humidity and dry inland summers better than wood or vinyl.
- Most James Hardie failures we see on additions aren’t the plank itself; they’re the flashing, caulk joints, or fastener corrosion behind it.
- Full addition pricing in Westminster: $45,000 – $130,000. ADU: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
- Every Bradford project gets a written price before work starts and a full-year 365-Day Done Right Promise.
Which James Hardie Models This Applies To

James Hardie sells fiber cement siding and trim in a few product lines, and the right part depends on which one is on your addition. The main lines are HardiePlank lap siding, HardiePanel vertical siding, HardieShingle siding, and HardieTrim boards in smooth and textured finishes. Each comes in specific thicknesses (the common exterior thickness is 5/16 inch for lap and panel, with trim boards at 4/4 and 5/4 nominal) and standard exposure widths. Matching a repair means matching the thickness and the exposure, not just the color.
To identify yours, look for the printed back-stamp or the bundle label on an original course, or measure the exposed face of a lap plank. Exposure on HardiePlank runs in standard increments, and a mismatched exposure throws off the whole run of siding above it. Original color matters too, because James Hardie’s factory finishes are baked on and a field-painted patch will read differently within a season.
The OEM-versus-aftermarket decision is real here. A genuine James Hardie plank keeps the factory finish and the manufacturer’s material warranty intact. A quality fiber cement equivalent can work for small repairs where matching isn’t critical, but for anything visible we specify the James Hardie part so the finish and thickness line up. We don’t carry parts on a truck or stock them locally; we source the correct line, thickness, and color per job and document the specification in your written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Home Additions & ADU Is Failing
Fiber cement is a durable material, but the assembly around it is what fails first. Here’s what we look for on additions and ADUs across Westminster:
- Caulk joints opening at trim and corners. The sealant at trim-to-siding and corner joints ages faster than the plank. When it cracks, water gets behind the board and the failure starts at the joint, not the face. Re-caulking on schedule is cheaper than replacing planks.
- Lap siding lifting or oil-canning. Usually a fastener problem, not a plank problem. Corroded or under-driven nails let the board move, and the wrong fastener in coastal air will fail well before the siding does.
- Staining or efflorescence below windows and at the roof-wall line. This points to flashing and kick-out detail at the junction. Water is getting where it shouldn’t, and the siding is just showing you where.
- Paint or factory finish chalking and fading on the south and west faces. Westminster’s sun load is hard on any exterior finish. Factory-finished James Hardie holds longer than field paint, but it isn’t permanent.
- Soft spots or swelling at the bottom course and near grade. Fiber cement doesn’t rot like wood, but the substrate and trim behind it can. This one needs a look at the framing and sheathing, not just the siding.
If you’re seeing two or more of these on the same wall, the repair is usually a full re-clad of that elevation with corrected flashing, not a patch.
Replacement Cost & What’s Included

For a new addition or ADU build in Westminster, the exterior line item for James Hardie siding and trim is bundled into the overall project cost, which is why the totals below are your planning numbers. Patching an existing wall is quoted separately, line by line.
| Project | Installed range (Westminster) |
|---|---|
| Home addition (full build) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What moves the number: square footage, whether the foundation and roof are new or tied into the existing structure, the number of windows and doors (which drive trim and flashing detail), and how much of the exterior is clad versus stucco or another material. Electrical and plumbing rough-in also swing the total. You get a written price before any work starts, with the scope and the brand specifications spelled out. There are no numbers that move at the door.
Every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a safe half and a risky half to this. You can walk the exterior and check for cracked caulk, lifted planks, and staining below windows, and you can photograph what you find. That’s useful information for any contractor you call. What you shouldn’t do yourself is pull siding to inspect the substrate, re-flash a window-wall junction, or open a wall to check framing. That work involves cutting into a weather envelope and, on additions and ADUs, often working around electrical rough-in. Done wrong, a DIY patch lets water in where none was getting before and hides the real failure until it’s more expensive.
On a project this size, a bad repair is a five-figure mistake. Call (833) 954-5086 and we’ll look at what’s actually failing before anyone touches a tool. Estimates are free, and a real person picks up, day or night.
FAQs

The material itself is rated for decades, and in Westminster’s coastal humidity and dry-summer cycle it typically holds up well past 25 years when it’s installed over a sound substrate with correct flashing. The realistic weak point is the assembly around it: caulk, fasteners, and flashing often need attention in the first 10 to 15 years, well before the plank does.
Often yes, if the failure is at the caulk, fasteners, or flashing rather than the plank itself. A full elevation re-clad makes sense when multiple courses are involved or the substrate behind is compromised. We’ll tell you which it is in the written estimate. Call (833) 954-5086 for an exact quote.
An addition typically runs several months from permit to final inspection, and an ADU runs longer because of the utility work and inspection schedule. A patch or partial re-clad is a much shorter job. We put the schedule in writing before we start, alongside the price.
We specify the correct line, thickness, and color per job and document it in your written scope, then source it from a supplier for that specific project. We don’t stock parts or carry siding on a truck. That way what shows up is matched to what’s on your addition or specified for your new build, and the material warranty stays traceable. We also work with KraftMaid, Cambria, and Silestone on the interior side of additions and ADUs, so the whole project runs on documented materials.
Get a Written Price for Your Westminster Project
Whether you’re repairing a failing James Hardie exterior on an existing addition or planning a new addition or ADU, the starting point is the same: a written price before any work begins, with the scope and the brand specifications in front of you. Bradford Remodeling Co Westminster works to The Garrison Standard, which means a documented scope, a clean site at close, and a signed 365-Day Done Right Promise in your hand at the end. Background-checked, uniformed technicians show up on every job, and a live person answers the phone around the clock. Call (833) 954-5086 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












