







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The Westminster Owner’s Guide
We install and service ES Windows-compatible windows and doors across Westminster, and most full window replacement projects here land between $4,500 and $15,000 installed, with single-unit swaps running well below that. Impact-rated window installation, which some Westminster owners choose for code or noise reasons, runs $8,000 to $25,000. We give you a written price before any work starts, so the number you hear is the number you sign. Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with ES Windows.
Most owners don’t start out looking for a part. They start with a symptom: a window that won’t latch in summer, a door that drags on the threshold after a Santa Ana heat stretch, fog between the panes, or a crank that spins without moving the sash. That symptom tells us which component failed – the sash balance, the weatherstripping, the glazing seal, the hinge, or the locking hardware. From there we match the part to the exact ES Windows series and get you a real price.
Which ES Windows Models This Applies To

ES Windows has built several product lines over the years, and the part that fits one series will not fit another. The two things that matter most are the series name and the actual unit dimensions. Vinyl single-hung and slider lines use different sash balances and different tilt-latch hardware than casement and awning lines, and the door lines use their own threshold, hinge, and multipoint lock sets. A part pulled for a slider will not seat in a casement, and the reverse is just as true.
The fastest way to identify your unit is the manufacturer label, usually a sticker on the jamb or the top of the sash, or etched into the glass corner. That label carries the series and often the original glass spec. If it’s faded or gone, we measure the rough opening, the visible glass, and the sash height and width, then match against ES Windows component drawings.
On the OEM-versus-aftermarket question: for structural or safety-critical pieces – sash balances, hinge sets, multipoint locks – we source OEM or a documented equivalent that meets the same spec. For weatherstripping, sweeps, and glazing gaskets, a quality aftermarket extrusion is a fair call and often costs less. We tell you which is which before you commit. We don’t claim to stock parts or carry them on a truck; every part is sourced to your unit, which is why we identify the series first and order second.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
Westminster sits close enough to the coast to get marine air and far enough inland to bake in summer. That swing is hard on vinyl, gaskets, and hardware, and it’s why we see certain failures repeat here.
- Window won’t stay up or slams shut. The sash balance has lost tension or the balance shoe has cracked. Vinyl balances get brittle with heat cycling, and once one fails the sash drops under its own weight.
- Draft or water at the corners. Weatherstripping and corner gaskets compress and dry out over time. A gasket that’s lost its memory lets air and driven rain past the frame even when the window is latched.
- Fog or haze between the panes. The sealed glazing unit’s perimeter seal has failed and moisture has entered the air space. This is a glass-unit replacement, not a frame problem, and the fog won’t clear on its own.
- Door drags or won’t latch squarely. A sagging hinge or a worn threshold has thrown the door out of square, so the lock no longer lines up with the strike. Left alone, the misalignment wears the lock and the frame.
- Crank spins, sash doesn’t move. The operator arm or its gear has stripped, or the hinge track is binding. On casement and awning units this is a hardware failure, and forcing the crank makes it worse.
If more than two of these show up on the same unit, the part cost plus the labor can approach the price of a new unit, and we’ll tell you when replacement makes more sense than repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what window and door work runs in Westminster, installed, parts and labor included:
| Scope | Installed Price Range |
|---|---|
| Single window unit replacement | Portion of $4,500 – $15,000 project range |
| Full window replacement (whole home) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
The range is driven by unit count, glass spec, whether the frame is replaced or the sash only, and access – a second-story window over a patio takes longer than a ground-floor slider. You get a written, line-item price before work starts: the part, the labor, and any trim or finish repair spelled out. Nothing moves at the door. Every job carries our 365-Day Done Right Promise – if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
Some checks are safe for you to do. Run your hand along the frame and sash to find the draft, look for cracks in the weatherstripping, confirm the lock engages, and read the label for your series. That information helps us quote accurately.
Where DIY goes wrong: sash balances on double-hung and single-hung units are under real tension, and a balance that releases can whip out of the jamb. Glass units are heavy and fragile, and a dropped sash can break or injure. On casement operators and multipoint door locks, the adjustment is precise – a quarter-turn the wrong way binds the mechanism. This is not the part to force. Our technicians have up to 22 years of experience, and they work from a written price with background-checked, uniformed crews on every job. Call (833) 954-5086 for a free estimate.
FAQs

Most ES Windows vinyl units give 15 to 25 years on the frame, but the hardware and gaskets wear faster in our climate – plan on balances, weatherstripping, and glazing seals needing attention sooner than the frame itself. Marine air and summer heat accelerate that wear. Call (833) 954-5086 if your unit is showing symptoms and we’ll tell you whether it’s a part or a replacement.
Often yes – a sash balance, operator, hinge, or lock can be swapped on its own, which costs less than a new unit. The exception is a failed glazing seal or a warped frame, which means the unit itself needs replacing. We diagnose first, then quote the repair or the replacement, whichever is the better call. Call (833) 954-5086 for a free estimate.
A single part swap – balance, operator, or hardware – is usually a short visit once the correct part is on hand, while a full window or door replacement takes longer depending on unit count and access. We confirm the timeline in writing before the work starts. Call (833) 954-5086 to schedule your free estimate.
We identify your series from the label or by measuring, then source the part to that exact spec – OEM or a documented equivalent for critical hardware, quality aftermarket for gaskets and sweeps. We don’t stock parts or carry them on a truck, so the correct part is ordered to your unit. For other brands, we also service KraftMaid, Cambria, and Silestone among the materials we work with. Call (833) 954-5086 to get started.
Whether it’s one stubborn sash balance or a whole-home set of ES Windows units, the next step is the same: a written price you can read before any tool comes out. Call (833) 954-5086 for a free estimate with Bradford Remodeling Co Westminster, and we’ll get your windows and doors squared away.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












