







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Westminster Owner’s Guide
Kitchen remodeling specs built around ES Windows products in Westminster typically run $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether the window and door openings get reframed. When a window or cabinet-integrated component tied to an ES Windows install fails – a fogged sealed unit over the sink, a sash that won’t hold open, a soft cabinet return where a slider was anchored – we rebuild the affected section rather than tear out the whole kitchen. Most kitchen window and cabinet-front swaps are scheduled within the same week, not months out.
Owners usually catch the problem after the fact: the window over the prep zone starts fogging in the morning marine layer, or the cabinet panel next to a slider warps because the original install left no flashing gap. That’s the moment this page becomes useful.
Key Takeaways
- Westminster kitchen remodels run $14,000 – $45,000 installed, with written pricing before work starts.
- ES Windows-compatible window and cabinet work is treated as a section rebuild, not a full gut.
- We install KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces for homeowners comparing options.
- Every completed job carries the 365-Day Done Right Promise – if it fails inside a year, we return and fix it at no charge.
Bradford Remodeling Co Westminster is an independent service provider. We’re not affiliated with ES Windows, and we don’t claim to stock their parts – we source the correct components for your model and install them to spec.
Which ES Windows Models This Applies To

ES Windows built and distributed mostly vinyl and aluminum-framed products across Southern California through the 1990s and 2000s, and the kitchen applications that come up most in Westminster are horizontal sliders over the sink, fixed picture units over islands, and awnings in older 1950s-70s tract homes. When we open a wall, we identify the unit from the manufacturer’s label on the frame or, failing that, from frame dimensions and sash channel measurements.
That identification step matters more than homeowners expect. ES Windows changed sash channel profiles and balance hardware across production runs, so an off-the-shelf replacement sash from a big-box store often won’t seat correctly even when the nominal size matches. The gotcha: a 35-½ by 23-½ inch rough opening is a common nominal size, but the actual felt-lined channel depth varies by build year. We measure the channel, not just the opening.
OEM versus aftermarket for ES Windows
Genuine ES Windows components are getting harder to source, especially for units discontinued in the 2000s. A quality aftermarket equivalent (a compatible balance, sash, or insulated glass unit built to the same U-factor) is usually the honest path on a kitchen window. For cabinets, doors, and surfaces, we work with KraftMaid and Wellborn cabinetry and Cambria or Silestone countertops – documented brands with manufacturer specs behind them, so we’re not guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
The symptoms below are what we see on ES Windows-linked kitchen sections in Westminster. Each points to a root cause, not just a surface annoyance.
- Fogging between the glass panes. The sealed insulated glass unit has lost its desiccant seal and moisture is getting in. Common over sinks and prep zones where the marine layer hits first. The glass needs replacing, not cleaning.
- A sash that won’t stay open or slams shut. The balance or spiral spring has worn out. Vinyl balances lose tension unevenly and the sash droops. On older ES Windows units the channel profile is the pinch point for sourcing the right replacement.
- Cabinet panels warping beside a slider or awning. Water is getting past the window’s flashing and soaking the cabinet return. That’s a rough-in problem as much as a window problem, and it’s the one that gets expensive if ignored.
- Drafts or condensation running down the frame. Weatherstripping or the frame seal has failed, so outside air reaches the interior. In coastal Westminster humidity, that shows up as condensation stripes on the sill.
- A soft or spongy cabinet base where a window was anchored. The original install let moisture reach the substrate. The cabinet needs a partial rebuild, not just a new door.
If the failing part is a high-tension window balance or anything structural in the frame, stop and read the DIY section below before you touch it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we write into quotes for Westminster kitchens, calibrated to local market pricing. These are installed prices, not part-only prices – the number you see is the number you get, written before work starts.
| Scope | Installed range |
|---|---|
| Kitchen window / cabinet section rebuild within a remodel | $14,000 – $45,000 (kitchen remodel bracket) |
| Small kitchen section rebuild | $9,000 – $20,000 |
| Cabinet installation (panel returns, fronts) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves on three things: whether reframing is needed at the window opening, the material tier you choose, and how much cabinet run has to come out to reach the substrate. Every quote is a written, line-item price – no numbers that move at the door. The work itself is covered by the 365-Day Done Right Promise; if the install fails within a year, we come back and correct it at no charge.
DIY or Call Us?
Some checking is safe to do yourself. You can confirm the glass is fogged on the inside (not surface condensation), measure the rough opening, locate the manufacturer label, and photograph the sash channel. That information helps us quote faster.
Where it goes wrong: insulated glass unit replacement and sash swaps require resealing and re-balancing, and a window balance under tension is a component that can snap back and cause injury if handled without the right tools. Anything structural at the opening – reframing, flashing, substrate repair – belongs with a crew, not a weekend. Don’t force a replacement sash into a channel that doesn’t match; you’ll crack the vinyl and add cost. If you’re unsure which part you’re looking at, call (833) 954-5086 and we’ll walk you through identifying it before you buy the wrong one.
FAQs

An insulated glass unit typically lasts 15 – 25 years before the seal fails; vinyl sash and balance hardware closer to 10 – 20 depending on sun exposure. In Westminster’s coastal humidity, seals age faster than in inland climates, so expect the low end. Call (833) 954-5086 for an exact assessment – estimates are free.
Sometimes. A worn balance can often be replaced without touching the glass, and weatherstripping is a straightforward swap. A fogged sealed unit can’t be repaired – the glass must be replaced. We’ll tell you which applies before quoting. Call (833) 954-5086 to schedule the check.
A single window or cabinet-front swap is usually a one-day job once the correct part is on site. Section rebuilds that involve reframing or substrate repair run two to four days. The written quote states the timeline before work begins. Call (833) 954-5086 for your free estimate.
We identify the unit from its label or measured channel and source either a genuine component where available or a quality aftermarket equivalent built to matching specs. We don’t stock parts and won’t claim we do. Call (833) 954-5086 and we’ll confirm what’s available for your model.
No. The written price you receive before work starts is the price you pay, with no change orders added at the door. That’s part of The Garrison Standard. Call (833) 954-5086 to start with a free written estimate.
When a window seal or cabinet section fails in a Westminster kitchen, the fastest path to a straight answer is a phone call. Our technicians have up to 22 years of experience, every crew member is background-checked and uniformed, and a live person answers the phone 24 hours a day. Call (833) 954-5086 to schedule your free estimate with Bradford Remodeling Co Westminster.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












