







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Westminster Owner’s Guide
A full CWS bathroom remodel in Westminster runs $9,000 to $28,000 installed, and a smaller bath or a single shower swap sits between $5,000 and $12,000. We’re an independent contractor, not affiliated with CWS, and we install and remodel to CWS-compatible specs. This is planned work, so we schedule it properly rather than promising same-day tear-out; your written price comes first, then the build runs on a set timeline.
Most Westminster owners don’t start with a part failure. They start with a symptom: a shower pan that flexes underfoot, tile popping loose around a drain, a vanity that’s pulled away from the wall, or water staining the ceiling of the room below. Each one points to a specific component that’s reached the end of its line, and figuring out which one is the first real step.
Which CWS Models This Applies To

CWS bathroom components show up across a wide spread of model years, and the fittings changed more than once. The reliable way to match a part to your unit is the data plate, usually inside the vanity cabinet, behind the toilet tank, or on the shower valve escutcheon, plus a tape-measure check on rough-in dimensions. CWS tub and shower rough-ins on many models sit at a 60-inch tub length and a standard drain offset, but the valve cartridges, trim rings, and pan assemblies are model-specific and don’t cross over cleanly between series.
On the OEM-vs-aftermarket question, we’re straightforward: for concealed valves and pans, the OEM-fit part is worth the money because a near-fit aftermarket cartridge can leak at the bonnet or seize within a season. For trim, handles, escutcheons, and standard drain covers, a quality aftermarket equivalent works fine and costs less. Bring us the model number off the plate and we’ll tell you which side of that line your part falls on. We’re an independent service provider, not affiliated with CWS, so our answer is about fit, not brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Shower pan flexes or feels spongy. The substrate under the pan has lost its bond, usually because the original mortar bed cracked. Left alone, that flex cracks the pan itself.
- Grout and caulk keep failing in the same corner. Repeated failure at one joint means movement behind the tile, not bad caulk. Something structural is shifting.
- Water stain on the ceiling below. This is a drain seal, supply line, or pan membrane leak. It’s the symptom that does the most damage fastest and deserves a look right away.
- Vanity pulling away from the wall or sagging. The mounting or the studs have given way, or the cabinet box has swelled from moisture wicking up from the floor.
- Valve cartridge stiff, dripping, or the temperature won’t hold. The cartridge has worn or mineral-scaled. In Westminster’s hard water, this shows up years earlier than most owners expect.
Five distinct causes, five different repairs. The symptom tells you where to look before anyone opens a wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Whole-bath remodel in Westminster: $9,000 to $28,000. Small bath: $5,000 to $12,000. Walk-in shower: $4,500 to $12,000. Tub-to-shower conversion: $3,500 to $10,000. Shower replacement: $3,000 to $8,500. Vanity installation: $800 to $3,000.
What drives the range is substrate condition, tile selection, fixture tier, and whether the rough-in has to move. A pan replacement on a sound substrate is the low end; a full gut with new plumbing layout is the high end. Our price is written before any work starts and it doesn’t move at the door. Parts and labor are itemized so you can see what the fixture costs versus the install. The finished work carries our 365-Day Done Right Promise: a full-year written guarantee, and if it fails inside that window we come back and make it right at no charge. We also install KraftMaid, Cambria, and Silestone alongside CWS-compatible components.
DIY or Call Us?
You can safely check a few things yourself: read the data plate, measure the tub and drain offset, watch for ceiling stains below the bath, and feel the pan for flex. Those checks cost nothing and tell you a lot.
Where DIY goes wrong is the actual swap. Setting a shower pan needs a level, bonded substrate or it flexes and cracks. Moving a valve cartridge means shutting off water at the right spot and getting the seating perfect, or you get a slow leak inside the wall that you won’t find until the drywall below is ruined. Re-grouting over movement without fixing the movement just postpones the failure. If your symptom is a ceiling stain or a pan that moves, that’s the point to call us. Call (833) 954-5086 for a free estimate and a written price.
FAQs

How long should a CWS bathroom component last? Most CWS pan and valve assemblies hold up for 15 to 25 years with regular maintenance. Westminster’s hard water shortens valve life noticeably, so expect cartridges to need attention sooner than the pans do. Call (833) 954-5086 for an exact quote on your part; estimates are free.
Can the part be repaired instead of replaced? Often yes for valve cartridges, trim, and drain covers, which can be rebuilt or resealed without opening walls. Pans and substrates that have flexed or cracked almost always need replacement, because the failure is underneath. Call (833) 954-5086 and we’ll tell you which side of that line you’re on.
How long does the swap take? A cartridge or trim swap is a couple of hours. A shower pan or valve-body replacement runs one to three days once the wall is open, and a full remodel is a multi-week schedule set in writing upfront. Call (833) 954-5086 to schedule your free estimate.
How do you source the replacement part? We match from your data plate and measurements, then source the OEM-fit part for concealed components and quality aftermarket for trim and covers. You’ll see the part line and the labor line separately in the written quote. Call (833) 954-5086 for a free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












