A Bradford company - serving Westminster, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Cover · Westminster

Cover Home Additions & ADU in Westminster, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Westminster
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cover Home Additions & ADU: The Westminster Owner’s Guide

Cover-compatible home additions and ADUs in Westminster run about $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, depending on footprint, foundation type, and which Cover series the structure is built to. We handle the rough framing, structural tie-in, and finish-out so the new square footage matches your existing Cover envelope instead of fighting it. Most owners don’t discover a problem with a failing section until something shows itself: a hairline crack that widens across a season, a door that stops latching square, or a soft spot in the floor near the tie-in wall.

Call (833) 954-5086

Which Cover Models This Applies To

A garage converted into a guest room and home office

Cover’s structural and modular lines have changed their connector and panel specs across series, and that’s the first thing to pin down before anyone touches a wall. Older Cover units use a different header sizing and anchor spacing than the current generation, which matters the moment you add load. Here’s how to identify what you’re working with:

  • Data plate: Cover stamps a series and model identifier on the structural data plate, usually near the main panel or in the utility access area. Photograph it before anything gets moved.
  • Panel dimensions: Measure the wall thickness and stud or panel spacing. A 2×6 wall framed to current Cover spec won’t accept a connector sized for an older 2×4 assembly, and forcing it is how tie-ins fail.
  • Anchor pattern: Count the anchor bolts and note spacing. A different count or spacing than the current Cover series is your signal that this is an older generation.

On the OEM-versus-aftermarket question: OEM Cover panels and connectors are the safe match because the load ratings are documented against your series. Quality aftermarket framing and cladding is fine for finish work, but I wouldn’t sign off on aftermarket structural connectors unless the engineer’s documentation matches your specific Cover generation. We’re an independent service provider, not affiliated with Cover, so we read the data plate and build to it rather than guess. We also work alongside KraftMaid, Cambria, and Silestone finishes when a Cover addition grows into a kitchen or bath, so the finishes and structural work stay consistent.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cover Home Additions & ADU Is Failing

A failing addition rarely announces itself. It telegraphs. Watch for these:

  • Hairline cracks that widen seasonally. Caused by differential movement between the addition and the original structure at the tie-in. A crack that grows and shrinks with the seasons points to a connector or anchor that’s working loose, not just settling.
  • Doors and windows that stop latching square. Caused by a floor or header that’s deflecting under load. If a door that closed cleanly last spring now catches, the structure above it has moved.
  • Soft or spongy floor near the perimeter. Caused by moisture intrusion at the sill plate, common where cladding and flashing weren’t detailed right. California’s dry spells hide it until the wet season.
  • Visible gaps at the roofline or soffit. Caused by separation between the addition roof and the main roof system. The soffit is the underside surface where roof meets wall, and a gap there is a water path.
  • Sticking or binding windows in summer heat. Caused by thermal expansion the framing wasn’t built to accommodate. In a Westminster summer, a window that binds tells you the rough opening was cut tight.

Any two of these together warrant a look before the next wet season.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Footing forms with tied rebar for a home addition

Home addition pricing in Westminster lands between $45,000 and $130,000. ADU construction runs $90,000 – $220,000, and a garage conversion sits lower at $30,000 – $80,000. What moves the number:

  • Foundation type: Slab, stem-wall, or pier-and-beam all change the rough-in and concrete line.
  • Tie-in scope: How much of the existing Cover structure has to be opened to make a clean connection.
  • Cover generation: Older series need more anchor and header adaptation, which adds framing labor.
  • Finish level: Cladding, roof material, and interior finishes account for the widest spread in the range.

Every project starts with a written price before work begins, broken into line items you can read, so nothing moves at the door. The 365-Day Done Right Promise covers all completed work: if it fails within a year, we come back and correct it at no charge.

DIY or Call Us?

Here’s the honest split. You can safely check the data plate, measure panel and anchor spacing, and note where cracks widen over time. That’s documentation, not repair, and it’s useful.

Structural work on a Cover addition is where DIY goes wrong. Moving a load-bearing header, re-anchoring a connector, or re-flashing a soffit tie-in without the right documentation risks the whole structure. The failure mode isn’t cosmetic; it’s a wall that opens. That’s a job for a background-checked, uniformed technician working to the series spec, not a weekend with a reciprocating saw.

Before you touch anything, call us at (833) 954-5086 to schedule a free estimate.

FAQs

A room opened to the studs with new wiring and plumbing

How long should a Cover home addition last? A properly built Cover addition lasts 30 to 50 years with the structural system intact, though cladding and flashing need attention sooner in California’s alternating dry-and-wet climate. The tie-in is where lifespan is won or lost. Call (833) 954-5086 for an exact quote; estimates are free.

Can a failing addition be repaired instead of replaced? Yes, in most cases. A loosening connector, a deflecting header, or localized moisture damage is usually a targeted repair, not a rebuild, and that’s cheaper than a full re-build at $45,000 – $130,000. The repair only becomes a replacement when the structural system itself has moved. Call (833) 954-5086 for an exact quote on a repair; estimates are free.

How long does the work take? A targeted structural repair is usually a few days of scheduled work, while a full addition is measured in weeks depending on foundation and tie-in scope. We give you the timeline in writing before work starts, so there are no surprises. Call (833) 954-5086 for an exact quote; estimates are free.

How do you source Cover-compatible parts? We read your data plate and pull parts documented to your specific Cover series, favoring OEM connectors and panels where the load ratings match. Where aftermarket is appropriate, the specification is verified against your generation before install, so we’re not guessing. Call (833) 954-5086 to talk through sourcing for your model.

Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA galley kitchen opened up to the dining room with a new peninsula

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Westminster

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Westminster team

A local vetted partner works across Westminster and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5086
Local Service Coverage

Request a Free Estimate in Westminster

Tell us what you need - Bradford Remodeling Co Westminster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch