







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Westminster Owner’s Guide
We install CertainTeed-compatible driveway and paver systems across Westminster, and a full paver driveway install here typically runs $7,000 to $18,000 depending on square footage, base prep, and the specific CertainTeed line you’re matching. A paver patio starts around $3,500 and reaches roughly $11,000. If you’re replacing a failed section rather than building new, we can usually get an assessment and written price to you quickly, with material sourced to your existing product.
Owners in Westminster usually discover a failure the same way. A sunken spot appears where the car parks, one or two units rock underfoot, or joints start pushing sand up onto the surface. Then the weeds come through the seams. CertainTeed pavers themselves are tough – the failures almost always trace to what’s underneath them, and to how the edge was restrained when the driveway went in.
Key Takeaways
- Most Westminster paver failures are base and edging problems, not the pavers themselves.
- CertainTeed pavers carry a manufacturer warranty that stays intact only when installed to spec.
- We give a written price before work begins, and every install is covered by the 365-Day Done Right Promise.
Which CertainTeed Models This Applies To

CertainTeed’s hardscape line covers several paver families used across Southern California driveways and patios, each with its own thickness, face texture, and color series. The thickness matters most for a driveway. Standard residential pavers run about 2 3/8 inches; driveways that take regular vehicle weight want a heavier profile, usually 2 3/4 inches or more, or a manufacturer-approved driveway-rated product. Using a thinner patio paver on a driveway is one of the most common mismatches we correct in Westminster.
To identify what you have, check three things. First, the pallet band or a stamp on the underside of a loose unit will often carry the CertainTeed name and product line. Second, measure a paver’s length, width, and thickness in inches and compare against the current spec sheet for the line. Third, photograph the top face and the edge profile – texture and beveling are as identifying as dimensions.
On OEM versus aftermarket: CertainTeed pavers are not a “part” you swap in a housing, so the OEM question becomes matching the exact product and lot where color consistency matters. Where your existing pavers are discontinued, we look for the closest current CertainTeed line and blend it in a less visible field rather than forcing a mismatched patch into the center of the driveway. We work with CertainTeed as part of our documented brand roster alongside KraftMaid, Cambria, and Silestone. To be clear, Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with CertainTeed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
- Rutting and sunken spots where tires sit. This is a base failure. Water reached the aggregate underneath and it lost compaction, so the paver settles into the void.
- Rocking or loose individual pavers. Usually a failed bedding layer or missing joint sand. Once one unit works loose, water gets under the neighbors and the problem spreads.
- Sand washing out of the joints. Joint sand holds the field together. When it erodes, joints open, and that’s your entry point for water and weeds together.
- Edge units spreading or heaving. The edge restraint has failed or was never pinned deep enough. Without a solid border, the field pushes outward, especially on a sloped Westminster driveway.
- Efflorescence or persistent moss and algae. A white powdery bloom or green growth means moisture is staying in the system – often a drainage and grading issue, not the paver’s surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Westminster, a paver driveway installation runs $7,000 to $18,000. A paver patio installation runs $3,500 to $11,000. If you’re redoing a failed driveway in a related concrete or asphalt system, driveway replacement runs $5,000 to $14,000, concrete driveway installation runs $4,500 to $12,000, and asphalt driveway paving runs $3,500 to $9,000. Sealing an existing surface runs $250 to $700.
What drives the range: total square footage, excavation depth, how much failed base has to come out and be replaced, edge restraint scope, and whether you need drainage corrections. The installed price includes removal of the failed system, compacted aggregate base, the CertainTeed pavers, polymeric joint sand, edge restraint, and cleanup. We give you a written, line-item price before any work starts – no number that moves at the door. Every install carries the 365-Day Done Right Promise: if the work fails within a full year, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Photograph the label on the pallet band or underside. Measure thickness and note any rocking units. Check whether joint sand is missing and whether the edge units have shifted. Snap pictures of the problem areas.
Where DIY goes wrong on pavers is the base. A paver driveway is only as good as the excavation, the aggregate, and the compaction underneath – and a homeowner re-setting a few units over a failed base just relocates the failure a few feet. Handling this safely and correctly means knowing the required base depth for a vehicle-rated driveway, the compaction standard, and the edge restraint spec. That’s the part that costs real money to get wrong twice. Call (833) 954-5086 and we’ll assess it and give you a written price.
FAQs

How long do CertainTeed pavers last on a Westminster driveway? The pavers themselves can last decades – the manufactured product is durable. What fails first in Westminster is the base and the joint sand, which is why a properly built base and restrained edge matter more than the paver brand. Call (833) 954-5086 for a free assessment.
Can my failed driveway be repaired instead of fully replaced? Sometimes yes. If the base is sound and only a small area or the edge has shifted, a targeted repair is possible. If there’s widespread rutting or sunken base, a repair is usually a stopgap. We’ll tell you honestly which one you’re looking at and give you a written price for either. Call (833) 954-5086 to schedule a free estimate.
How long does a paver driveway replacement take? A typical residential driveway takes several days to a week, depending on square footage, base excavation, and drying conditions. We don’t quote same-day installs on driveway work – that’s a job that has to be built right. Call (833) 954-5086 for a written schedule before work begins.
How do you source the CertainTeed paver to match my existing one? We identify the product line from the pallet band, stamp, or measurements, then source through our documented material roster. Where your exact line is discontinued, we find the closest current CertainTeed product and blend it out of the field’s most visible area. Call (833) 954-5086 and we’ll confirm availability and pricing.
Call (833) 954-5086 to schedule your free estimate. Bradford Remodeling Co Westminster works with a documented roster of premium brands and backs every install with a written price before work starts and the 365-Day Done Right Promise. A live person answers the phone around the clock.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












