







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Roofing: The Westminster Owner’s Guide
Cambridge Pavers roofing work in Westminster is typically a roof repair or partial re-roof tied to paver flashing and underlayment details, and most repairs fall between $400 and $1,800, while a full roof replacement runs $8,000 to $20,000 depending on pitch, square footage, and material. We schedule estimates, not emergency dispatch, so you get a real appointment window and a written price before anything starts. Most Westminster owners find the problem the same way: a brown water ring on the ceiling after a Santa Ana wind-driven rain, or a re-shingled corner where the old pavers meet a new patio cover and the junction was never flashed correctly. The part failed; the roof did what roofs do.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers is a paver manufacturer, not a roofing brand, so “Cambridge Pavers roofing” almost always means roofing that meets, flashes against, or covers a Cambridge paver surface – a patio cover roof over a Cambridge patio, a low-slope section tied into a Cambridge paver walkway, or a hardscape project where the Cambridge product line shows up in the finish schedule. Cambridge lines you’ll see on Westminster jobs include the Ledgestone, Maytrx, and Olde English Wall series of retaining wall block, the Cambridge Pavingstones line (including the popular Cambridgeshire and Roundtable collections), and their Bullnose and cap units – and the roof detail matters at the wall cap, at the transition to a patio cover, and at the flashing line where a Cambridge wall meets a new roof edge. Identify the exact product by the stamp on the back of the block or the label on the original pallet slip if you kept it; the model matters for cap dimensions and wall height, which in turn dictate flashing height on the adjacent roof.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Roofing Is Failing
Roof failures near paver hardscape show up in a few predictable places. Each of these symptoms points to a specific cause, and each is something we look for on every Westminster estimate:
- Water staining on the ceiling directly inside the wall line. Where a Cambridge retaining wall or patio tie-in sits against the house, a failed flashing detail lets wind-driven rain in. The stain shows up low on the interior wall, not at the ceiling peak.
- Rust streaks on the Cambridge cap or wall face. Fasteners used at the flashing junction have started to corrode. Westminster’s marine air layer, seven miles from the coast, accelerates corrosion on standard steel fasteners. Stainless is the correct spec for exterior flashing at the coast-adjacent edge.
- Lifted or curled shingles at the paver-to-roof transition. The junction was never given a proper cricket or kick-out flashing, so water pools at the edge and the shingle edges lift. This is the single most common install error we find on Westminster jobs with Cambridge walls meeting a new roofline.
- Soft spots or spongy decking near the paver wall. Water has found its way under the underlayment and the plywood has begun to delaminate. Listen for the change in tone when you walk the roof edge; a dull thud means wood replacement is coming.
- Granule loss in a stripe that follows the paver wall. The edge of a paver wall catches wind differently than open roof deck, so shingles along that line age first. If you see bare mat in a straight line, the flashing detail is wrong, not the shingles.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Westminster roof pricing on garden-variety shingle replacement runs $8,000 to $20,000, and a spot repair at a Cambridge paver junction is $400 to $1,800. Most Cambridge-adjacent repairs land in the lower half of that range because the scope is a single flashing detail, not a full re-roof. What moves the number: how much plywood needs replacement once the flashing is cut back, whether the paver wall itself needs a cap reset, whether the wall is a Cambridge Ledgestone unit weighing more per block than the replaced cap, and how steep the roof pitch is – Westminster has plenty of 4:12 and 5:12 California bungalows where adding a cricket at the wall takes more labor than the roof work itself. What’s included on a Bradford job: tear-off at the failure point, new ice-and-water shield or 30-pound felt as the underlayment, new stainless flashing, new shingles matched to the existing roof, a written price before the first tool comes out, and the 365-Day Done Right Promise. If the repair fails inside that year, we come back and fix it at no charge. Every price is itemized – parts, labor, and permit – so nothing moves at the door.
DIY or Call Us?
Roof work at a Cambridge paver wall sits in the “call a pro” column, but not every inspection does. What you can safely do from the ground: photograph the wall-to-roof junction with your phone’s zoom, check for stains inside the house near that wall, look for missing or lifted shingles and rusted fasteners with binoculars, and note whether water staining appears after a rain. Those four observations give us more to work with than most homeowners realize. What you shouldn’t do: climb onto a pitched roof to lift flashing and reset it yourself, especially not at a wall detail where you’d be working above a Cambridge unit that can shift. Falls are the injury we see most on these jobs, and Westminster roofs are steeper than most people estimate from the yard. The flashing itself is not a hard detail – but the physics of standing on a 5:12 pitch over a paver edge is not something we’d talk a homeowner into. Call us at (833) 954-5086 for a free estimate, and we’ll tell you honestly whether it’s a $400 flashing fix or a $1,800 bigger repair before we put a single tool on the roof.
FAQs

How long does a Cambridge Pavers roof flashing repair last? A properly rebuilt flashing detail in stainless with new underlayment should hold 15 to 20 years on a Westminster roof, but the underlying shingle field around it may age out first. The flashing detail is the long-lived part; the surrounding shingles have their own clock. Call (833) 954-5086 for a free estimate that covers both.
Can the flashing be repaired instead of replaced? Yes, in most cases. If the plywood underneath is sound, we cut back the shingles, replace the flashing, add a cricket if the wall junction calls for one, and re-shingle to match. Full replacement only becomes the answer when the wood has rotted or the shingle field is already near end of life. Call (833) 954-5086 and we’ll tell you which you’re looking at.
How long does the swap take? A Cambridge paver junction repair typically takes one day – half a day if the flashing detail is the only issue, full day if the cricket is added and the shingles need to re-cure. We schedule one job per crew per day so your estimator’s price and your install date don’t slip. Call (833) 954-5086 to get on the schedule.
How do you source the parts? Cambridge Pavers products come through their authorized dealer network, and we do not carry stock on hand. Roof and flashing materials are sourced per job through licensed supply in Westminster and Orange County. We do not stock parts on a truck and cannot promise a next-day swap – if your job needs Cambridge product, we order it and give you a written timeline before work begins. That’s The Garrison Standard: price in writing, timeline in writing, guarantee in writing. Call (833) 954-5086 for a free estimate.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












