







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Westminster Owner’s Guide
We install and service Boral windows and doors in Westminster, and a typical full replacement runs $4,500 – $15,000 for standard window packages or $8,000 – $25,000 when you step up to impact-rated units. Most Boral fails we see in Westminster don’t announce themselves. An owner notices a window that won’t latch cleanly, a sash that drags on the frame, or fog trapped between the panes. Then they find a draft in January, or water staining on the sill after a Santa Ana wind event pushes rain sideways against the glass. The part is usually a failed balance, a worn weatherstrip, a dead sealed unit, or a hinge that’s lost its alignment. None of those get better on their own.
Which Boral Models This Applies To

Boral makes windows and doors across the Vinyl, Aluminum, and Architectural series, and the part you need depends entirely on which line is in your wall. The easiest way to sort it out is to find the manufacturer’s label, which is usually stuck in the head jamb or the top of the sash channel. That label carries the model, series, and glass spec – read it before you call anyone, including us.
Vinyl units from Boral use different balance cartridges and weatherstrip profiles than the aluminum lines. A balance that fits a Vinyl double-hung won’t work in an aluminum slider, even if the window looks identical from across the room. Glass packages also vary: standard clear, Low-E, tempered, and impact-rated units each have their own part numbers, so the glass spec on the label matters as much as the frame.
The OEM-versus-aftermarket decision for Boral leans toward OEM for anything structural – balances, hinges, locking hardware – because the tolerances are tight and a mismatched part wears the frame. Weatherstrip, screens, and glazing gaskets are more forgiving, and quality aftermarket equivalents work fine if the profile matches. We’re an independent service provider, not affiliated with Boral, so we source parts by spec, not by brand loyalty. Our technicians have up to 22 years of experience matching windows and doors to the right replacement parts, and they’ll tell you honestly when OEM is worth the wait.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
Here’s what failure actually looks like on a Boral unit in Westminster. Each symptom points to a specific part, and each one is worth acting on before it spreads to the frame or the wall.
- The sash won’t stay up, or slams down. That’s a failed balance – the spring-loaded cartridge inside the jamb that holds the sash at any height. When the spring gives out, the sash becomes a falling hazard, especially on larger windows.
- Fog or condensation between the panes. The sealed glass unit has lost its airtight seal, so moisture has entered the space between panes. A dead unit means the Low-E coating and gas fill are gone; the window no longer insulates the way it was built to.
- Drafts around the perimeter of the frame. Worn or compressed weatherstrip has lost its memory, usually after years of Southern California sun baking the seals. You’ll feel it on windy days along the jamb and sill.
- The door drags, sticks, or won’t latch flush. Hinge wear or a settled frame has thrown the door out of square. Left alone, it wears the hinge plate and stresses the lock hardware until the latch assembly fails too.
- Water staining or soft wood near the sill. Failed glazing gaskets or corner seals let water in behind the frame. In Westminster, that moisture sits in the wall cavity after occasional heavy winter rain, and once the substrate stays wet, the damage is no longer just cosmetic.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Westminster owners, a single Boral window repair (a balance, hinge, or weatherstrip replacement) runs well below a full replacement. A full window replacement package sits at $4,500 – $15,000, and impact-rated installation runs $8,000 – $25,000. The range depends on window count, unit size, glass spec, and whether the existing frame is sound enough to keep. We give you a written price before any work starts, line-itemed so you can see parts and labor separately. No numbers that move at the door.
Every job we complete carries the 365-Day Done Right Promise: if a window or door we installed fails within a full year, we come back and correct it at no charge. Our technicians are background-checked and uniformed, and a live person answers the phone 24/7 – not a voicemail. When we also handle a kitchen or bath behind that new door, we work from the same documented brand roster, including KraftMaid, Cambria, and Silestone, so every material has traceable specs and a manufacturer warranty behind it.
DIY or Call Us?
Some checks are safe and worth doing yourself. Read the label in the jamb, measure the visible glass and the frame opening, and confirm which pane is fogged. Tightening a loose hinge screw or re-latching a door is fine. What you shouldn’t do is remove a sash from a double-hung frame, pull a sealed glass unit out on your own, or try to swap a balance under tension. Those parts carry stored force or sharp glass edges, and a window that drops or shatters can cut or injure you. This is one where a trained installer with the right tooling protects you and the opening.
If your Boral windows and doors in Westminster need a part matched correctly and installed right, call (833) 954-5086 for a free estimate. We’ll identify the model, price the part in writing, and tell you straight whether a repair or a replacement is the better spend.
FAQs

Vinyl Boral windows typically hold up 20 to 30 years in Southern California, and the glass sealed units fail sooner – often 10 to 15 years – because the seal degrades faster than the frame. Hardware like balances and hinges usually needs replacement before the window itself does. Call (833) 954-5086 for an exact quote on your unit – estimates are free.
Yes, in most cases, a failed balance, hinge, weatherstrip, or even a single fogged sealed unit can be replaced without touching the frame. Full replacement only makes sense when the frame is warped, the wood is soft, or multiple units are failing at once. Call (833) 954-5086 and we’ll tell you which path costs less for your specific window.
A single balance, hinge, or weatherstrip replacement is usually an hour or two, while a sealed glass unit swap runs a bit longer. We confirm the schedule with the written estimate, before any work begins, so you know exactly how long your day is affected. Call (833) 954-5086 to get that estimate started.
We source by the model and glass spec from the manufacturer label in your jamb, not by guesswork or a photo from across the room. That label prevents the most common mistake we see – a balance or gasket from the wrong series that looks right and fits wrong. Call (833) 954-5086 for a free estimate, and we’ll read the label with you.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












