A Bradford company - serving Westminster, CA
An open living room and dining area after a whole-home remodel
Atlas · Westminster

Atlas Windows & Doors in Westminster, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Westminster
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The Westminster Owner’s Guide

We install and replace Atlas-compatible windows and doors for Westminster homeowners, and most full window replacements land between $4,500 and $15,000, with impact-rated window installation running $8,000 to $25,000. We’re an independent service provider, not affiliated with Atlas, but our technicians have up to 22 years of experience matching parts to the actual unit in front of them. Here’s how owners usually find us: a fogged double-pane you can’t see through in the afternoon sun, a sliding door that won’t latch unless you lift it, or a crank that spins free because the operator arm snapped inside the sash. Westminster’s coastal marine layer and summer heat swings put real stress on seals and hardware, and Atlas units from the 1990s and 2000s are showing it now.

Call (833) 954-5086

Which Atlas Models This Applies To

A finished basement family room with a media wall and wet bar

Atlas built a long run of aluminum and vinyl window lines, plus sliding patio doors and a few awning and casement series, and the parts are not interchangeable across them. Before you order anything, find the label. Most Atlas units carry a manufacturer’s sticker either on the top or side of the sash frame (visible when you open the window) or etched into the glass at a corner with the series code and date. If the sticker is gone, measure the visible glass width and height, the frame depth, and the sash thickness to the nearest 1/16 inch, and note whether the operator is a single-arm crank, a dual-arm, or a roto-gear. Those three measurements plus the operator type will get you to the right part.

On the OEM-versus-aftermarket question for Atlas specifically: a good aftermarket operator, balance, or weatherstrip that matches the spec will perform the same as the original for a fraction of the cost, and for many older Atlas series the OEM part is discontinued anyway. The exception is a full sash or frame component on a newer unit still under manufacturer warranty, where aftermarket voids it. We’ll tell you which side of that line your window falls on before we quote. We also service KraftMaid, Cambria, and Silestone products on the interior side of your remodel.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

  • Fogging or condensation between the panes. The sealed glass unit has lost its argon or the desiccant is spent. It’s a failed insulated glass unit (IGU), not a cleaning problem, and no amount of wiping fixes it.
  • A crank that grinds, spins free, or won’t move. The operator arm or the gear inside the crank housing has stripped. This is the single most common Atlas casement and awning failure we see in Westminster.
  • The sash won’t stay up (or slams down). A coil-spring or block-and-tackle balance has broken. The window still closes, but the sash is unsafe to leave propped because the balance is the only thing holding it.
  • Water on the sill or a draft at the jamb. Weatherstrip has compressed flat or the weep system is blocked. Left alone, water reaches the rough opening and the framing behind it.
  • A sliding door that won’t latch or drags the track. Worn rollers or a misaligned strike. A door that won’t latch is a security gap, not just a sticking point.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A powder room with botanical wallpaper and a stone sink

Here are the installed ranges we quote in Westminster. Every one is a written price before any work starts, and the range reflects the unit itself plus labor, disposal, and trim.

Job Installed range
Window repair (operator, balance, weatherstrip) $150 – $450 per window
Window replacement $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Sliding door roller or latch service $200 – $600

What moves the number: the series of the unit, whether the frame is sound or has to come out, glass spec (tempered, Low-E, impact), and how many openings the crew is on site for. A single failed operator is a small job; a whole elevation of fogged IGUs is a replacement conversation. Our technicians have up to 22 years of experience, and every completed job carries the 365-Day Done Right Promise: if the work fails inside that year, we come back and correct it at no charge, with the guarantee in your hand at close. We work from a documented roster of premium brands so specs are traceable, never guesswork.

DIY or Call Us?

You can safely check the sticker, measure the glass and frame, test the crank by hand, and look for water staining on the sill. Those are diagnostics, and they cost nothing. Where DIY goes wrong on windows and doors is the removal itself. Pulling a sash, swapping a balance, or rehanging a sliding door can send a heavy panel down on a hand or a foot, and on a second-floor unit it’s a fall risk. Glass breaking under tension is a real hazard, and a mis-set sash that leaks means water in your framing, which is a far bigger repair than the part. We’d rather you call and describe the symptom than hurt yourself guessing.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

How long do Atlas windows typically last in Westminster? Plan on 20 to 30 years for the frame and 12 to 20 for the sealed glass unit, with the marine layer accelerating seal failure on west-facing elevations. Hardware like cranks and balances often goes first, around the 15-year mark.

Can the part be repaired instead of replaced? Yes, in most cases. A failed operator, balance, roller, or weatherstrip is a repair that keeps the existing frame and glass, and it’s the first thing we quote. A fogged or cracked sealed unit is replaced at the glass, and only a rotted or out-of-square frame pushes the whole window.

How long does the swap take? A hardware repair is usually a couple of hours on site. A single window replacement is typically half a day, and a full home is scheduled over multiple days once the written price is set.

How do you source the part? We pull the label and measurements, confirm the Atlas series, and source the correct OEM or a spec-matched aftermarket equivalent from a documented brand roster. Call (833) 954-5086 to schedule a free estimate.

Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA walk-in pantry with wood shelving

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Westminster

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Westminster team

A local vetted partner works across Westminster and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5086
Local Service Coverage

Request a Free Estimate in Westminster

Tell us what you need - Bradford Remodeling Co Westminster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch