







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Westminster Owner’s Guide
If you’re pricing Cambridge Pavers driveway and paver work in Westminster, a full paver driveway installed here typically runs $7,000 – $18,000, and a paver patio runs $3,500 – $11,000. We install Cambridge Pavers-compatible systems, pull the required permits, and give you a written price before any work starts. Most Westminster driveways take two to four working days once materials land on site; this isn’t emergency work, so we don’t promise same-day installs.
Owners usually discover a paver problem the same way. A section of the driveway starts rocking under the tires. A course along the garage apron dips after rain. Or sand keeps washing out of the joints, no matter how many times it gets swept back in. Each one points to what’s happening underneath: base, edge restraint, or drainage. Before you buy anything, it helps to know how Cambridge Pavers systems are built and what actually fails first in Westminster’s soil and coastal weather.
Key Takeaways
- Paver driveway installation in Westminster runs $7,000 – $18,000 installed; patios run $3,500 – $11,000.
- Cambridge Pavers are manufactured to spec, so compatibility is about series, thickness, and edge restraint, not a serial-numbered part.
- Most failures start in the base and edge restraint, not the paver face.
- We’re an independent contractor, not affiliated with Cambridge Pavers. We work with their systems because the specs are documented.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers doesn’t sell a wearable part with a serial number. What you’re replacing is usually a course of pavers, a run of edge restraint, or the base under a section. So the “model match” question becomes: which Cambridge series is already on your driveway, and what thickness and joint pattern does it use? The main lines you’ll see on residential driveways are the Cambridge paving stone series sold for vehicular use, generally 60mm or 80mm thick, in standard 4×8, 6×9, and 12×12 face sizes with a chamfered edge profile. Check a loose paver for a stamp on the underside; Cambridge molds usually carry a brand mark. Measure thickness with a tape – 60mm is about 2⅜ inches, 80mm about 3⅛ inches. Driveways carrying regular vehicle weight want 80mm; walkways and patios can use 60mm.
The OEM-vs-aftermarket decision here is a color-and-profile question more than a mechanical one. Cambridge’s color blends are proprietary, so a mixed lot from a discount yard will show as a patch, especially in sunlight. Where a close aftermarket paver with the same 80mm thickness and a similar chamfer works fine is under a fence line, behind a gate, or in a section you’ll cover with planting. On the visible driveway face, matching the Cambridge color and joint pattern is worth the wait. We source Cambridge Pavers through documented distributors and won’t substitute a lookalike without telling you in writing first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
Paver failure almost always telegraphs itself before a stone actually cracks. Here’s what to watch for in Westminster:
- Rocking or wobbling pavers underfoot or under tires. The bedding sand has migrated or the base has settled. In Westminster, the culprit is usually soil that holds moisture after winter rain and shifts as it dries through summer.
- Sand washing out of the joints after rain. Water is running across the surface instead of off it. Either the slope is wrong or the joint sand was never stabilized, and each rain pulls more out.
- Edge restraint lifting or pulling away. The plastic or concrete edge that holds the field in place has heaved or broken. Without restraint, the outer course spreads and the whole section loosens.
- Sunken section near the garage apron or a downspout. Water concentrates there, erodes the base, and the pavers drop. This is the most common failure point on Westminster driveways.
- Efflorescence or a white haze that won’t scrub off. Mineral salts are wicking up from a wet base. Sometimes it’s cosmetic; often it means water is trapped under the pavers with nowhere to drain.
One useful rule of thumb for Westminster: because the coastal marine layer keeps overnight humidity high and the rainy season dumps a lot of water in a short window, driveways that don’t drain toward the street or a swale fail faster here than they would inland. If your joints are washing out every wet season, the problem is drainage, not the pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Westminster, installed. These are written-price ranges, quoted before any work starts, with no numbers that move at the door:
| Scope | Installed price range (Westminster) |
|---|---|
| Full paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation (alternative) | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What drives the number: total square footage, excavation depth, the base material (class II aggregate needs compacting in lifts), edge restraint type, whether a drainage swale or channel drain is needed, and which Cambridge color blend and thickness you choose. Parts-plus-labor is quoted line by line, so you see what the pavers, base, sand, and restraint cost separately from the install. Every completed project is covered by the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. Call (833) 954-5086 to schedule your free estimate.
DIY or Call Us?
Some of this you can safely inspect yourself. Pull one loose paver and check the underside for a Cambridge brand mark. Measure thickness with a tape. Look at where the water goes during the next rain. Check whether the edge restraint is cracked or lifted. Those checks tell you what kind of job you’re facing, and none of them are dangerous. We install Cambridge Pavers-compatible systems and we don’t sell parts separately or carry stock on a truck.
Where DIY goes wrong is the base work. A paver job’s lifespan lives in the excavation and compaction, and a hand-tamped 2-inch sand base over Westminster’s soil will fail within a couple of wet seasons. Getting the subgrade right, compacting aggregate in proper lifts, and setting slope for drainage is what a crew does with a plate compactor and a transit level. This is also ground-level work – no fall risk, no electrical or gas involved – so if you want to handle a small repair yourself, a single rocking paver at the edge is a reasonable weekend job. A full driveway replacement isn’t. Call (833) 954-5086 and we’ll give you a written estimate and a straight read on which category your driveway falls into.
FAQs

A properly built Cambridge Pavers driveway with a compacted aggregate base and stabilized joints should hold up for 20 to 30 years, and the pavers themselves often outlast the base under them. In Westminster, the base and drainage are what shorten that number; a driveway drained toward the street lasts considerably longer than one that pools near the apron.
Usually, yes – a single sunken or rocking section can often be lifted, the base re-compacted, and the pavers re-set and re-sanded, which costs far less than a full replacement. What can’t be repaired is widespread base failure or a driveway where the slope has gone wrong across the whole field; that calls for a rebuild. Call (833) 954-5086 for an exact quote on either path – estimates are free.
A typical Westminster driveway takes two to four working days from the start of excavation to final joint sand, weather permitting, not counting the lead time to source the Cambridge color blend you want. Patios run one to three days. This is planned work, so we schedule it and give you the written price upfront rather than promise a same-day finish.
We order through documented Cambridge Pavers distributors so the color blend and thickness specs are traceable, not guessed at by whoever has a pallet in the yard. You see the paver, sand, base, and restraint costs itemized in the written estimate before any work starts. We work from a documented material roster – Cambridge Pavers alongside KraftMaid, Cambria, and Silestone on the interior side – so specifications are recorded rather than left to chance. Because we install through distributors, expect a lead time on special order colors. Call (833) 954-5086 to get a written price on your Westminster driveway.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












