







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Fence Installation: The Westminster Owner’s Guide
We install Cambridge Pavers-compatible fence systems in Westminster, and the installed price typically runs $3,500 – $9,000 depending on linear footage, wall height, and whether the run includes pilasters and caps. Cambridge Pavers manufactures segmental retaining wall and paver systems, so a “fence installation” on a Cambridge product is usually a freestanding or retaining wall installed as a fence line – posts, courses, caps, and footings rather than wood or vinyl panels. Most Westminster owners find out something is wrong when a course starts leaning, a cap rocks underfoot, or the wall face opens at a joint after a Santa Ana wind event. We’re an independent service provider, not affiliated with Cambridge Pavers.
Key Takeaways
- Installed Cambridge Paver fence and wall runs in Westminster run $3,500 – $9,000.
- Product identification matters: Cambridge systems are matched by series, unit depth, and cap profile, not by color alone.
- Most failures trace to the footing and base, not the block – which is why a replacement without correcting the base fails again.
- Every Bradford Remodeling installation in Westminster carries the 365-Day Done Right Promise in writing.
Which Cambridge Pavers Models This Applies To

Cambridge Paver fence and wall systems are built from specific unit series, and the fence line you can build depends on which series you have. If you’re matching an existing run, the first thing to confirm is the unit depth – most Cambridge segmental units fall in a 6-to-12-inch depth band, and mixing depths across a course is where leans start. Check the pallet banding or the underside stamp on a loose unit; if the original pallet is gone, we measure depth, width, and face texture and match against the current Cambridge series lineup rather than guessing from color.
That’s the OEM-vs-aftermarket decision for Cambridge specifically. Cambridge caps, corner units, and pilaster kits have fitters that are engineered to that series. A generic cap that looks close will rock, and a generic corner block will leave a visible gap at the return. For a fence line that’s already standing, we match the Cambridge series and use the correct Cambridge cap and corner units. Where a series is discontinued, a quality aftermarket equivalent from a documented manufacturer is the honest option, and we’ll tell you in writing which parts are matched and which are substituted before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Fence Installation Is Failing
- Leaning courses. The base course is moving, usually because the footing was under-dug or the base wasn’t compacted in lifts. The block is fine; what’s under it isn’t.
- Rocking or loose caps. The cap adhesive has broken down, or the cap was set on an uneven top course. Westminster’s heat cycles open that joint faster than most owners expect.
- Open vertical joints at corners. Corner units were swapped for field units, or the return wasn’t pinned. Water gets in and the joint walks wider each season.
- Efflorescence and white streaking on the face. Salt is drawing out of the unit because water is sitting in the wall. This is a drainage problem showing up on the surface.
- Heaving or settlement after rain. The footing depth or the drain behind the wall is wrong. In Westminster we see this most on runs that sit against clay-heavy soil where water can’t get out.
Two or more of these together usually means the base needs to come up, not just the top course patched.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Replacement and new fence installation on Cambridge Paver systems in Westminster land in the $3,500 – $9,000 range. What moves the number:
- Linear footage and wall height – a 3-foot garden wall and a 6-foot privacy-height wall use different footings and different unit counts.
- Pilasters and caps – each pilaster adds footing, corner units, and cap work.
- Base correction – if the existing footing is bad, demo, re-excavation, and compacted base are a real line item. We put it in writing rather than bury it.
- Drainage – gravel backfill and drain provisions behind the wall where the grade calls for it.
Every price is written before any work starts, with parts and labor itemized. The completed installation is covered by the 365-Day Done Right Promise – if it fails inside that year, we come back and correct it at no charge. Our technicians have up to 22 years of experience with segmental systems and hardscape installs.
DIY or Call Us?
An owner can safely check a few things: measure the unit depth, photograph the leaning face, note where water pools after rain, and look for loose caps. What we don’t recommend is lifting a wall course to check the base yourself. A segmental wall of any real height stores a lot of weight, and an unshored face can come down on you mid-teardown – that’s not a scare tactic, it’s how these fail. The rest of it – re-compacting base in lifts, setting the footing depth correctly for Westminster soil, pinning corners, and matching caps to the Cambridge series – is where DIY runs out of road and walls come back within a season. If you’re weighing a self-install, call (833) 954-5086 and we’ll walk you through what your specific run needs before you buy a single unit.
FAQs

A properly installed Cambridge Paver wall should hold 25 to 30 years or more, and the failure point is almost never the block – it’s the base and drainage underneath. Installations that skip compacted base lifts or proper drainage tend to show movement within 3 to 5 years. Call (833) 954-5086 for an assessment – estimates are free.
Sometimes. A single loose cap or one cracked corner unit can be repaired. Once a full course is leaning or joints across a run are open, the base has moved and a surface patch will fail again. We’ll tell you in writing which one you’re looking at. Call (833) 954-5086 to schedule the look.
Most Westminster fence and wall runs of 30 to 60 linear feet take 2 to 4 working days, including demo, base prep, and cap setting. Runs with pilasters, drainage correction, or height changes take longer. We give the schedule in writing with the price.
We match the Cambridge series by measuring unit depth, width, and cap profile, then source from Cambridge suppliers with the series confirmed in writing. We don’t carry stock of parts or parts on trucks – every unit is ordered for your run, which is why we confirm the series before ordering. Our technicians are background-checked and uniformed. Call (833) 954-5086 for a free estimate.
Cambridge Paver fence projects in Westminster reward getting the base right the first time. Bradford Remodeling Co Westminster is a member of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard – every price written first, every installer background-checked, and a live person answering the phone 24/7. If you’re weighing a replacement or matching a failing run, call (833) 954-5086 for a free estimate and a written price before any work starts. We also install material lines from KraftMaid, Cambria, and Silestone alongside our hardscape and exterior work.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












