







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Westminster Owner’s Guide
Unilock fence installation in Westminster typically runs $3,500 to $9,000 installed, depending on linear footage, wall block selection, and site conditions; most projects are scheduled within a week of the written estimate, not promised same-day. Homeowners usually call us after a storm, or after a Saturday spent pushing on a leaning wall section, only to find the base course has shifted and the cap units no longer sit flush. Others find cracked blocks along a post return or a fence line that has slowly lost plumb over a few seasons.
Which Unilock Models This Applies To

Unilock makes several modular block wall systems used for fence and privacy walls, and the right unit depends on the series. The Brussel Dimensional and Brussel Block lines are the workhorses for residential fence walls, with standard face dimensions around 8 by 4 inches and 12 by 4 inches and a depth that runs roughly 10 to 12 inches depending on configuration. The Yorkville and Olde Quarry series give a more textured face and often serve as cap or accent courses. Identifying what you have starts with a tape measure: pull a block and record face height, face length, depth, and any stamped mark on the bed face.
Unilock does not sell directly to homeowners, so a block pulled from a section that matches an older run may be a discontinued color or a batch shade from a different production lot. That matters in Westminster, where sun fading on a south-facing wall can make a fresh block read two shades lighter than its neighbor. On OEM vs. aftermarket: the correct move is a Unilock-distributed replacement through an authorized dealer, not a big-box lookalike. A close-match block will fit geometrically and still look wrong, and a non-compatible unit can compromise the interlock that holds the whole course together. We’re an independent installer and not affiliated with Unilock.
We also install fence and hardscape products from KraftMaid, Cambria, and Silestone in related home exterior and interior projects, and we treat every brand spec the same way: documented, matched, and traceable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
- Leaning or bulging sections. The base course has lost compaction or water is saturating the soil behind the wall. A wall that leans more than an inch over its height usually has a drainage problem, not just a block problem.
- Cap stones that rock or lift. Adhesive failure or freeze-thaw movement, uncommon in Westminster but real in older installs with poor cap bedding. Loose caps let water in behind the wall.
- Cracked or chipped face units. Often from impact, but stress fractures along a mortar joint or block edge point to settling. A crack that follows a straight line up the wall is a structural signal, not cosmetic wear.
- Rust stains or efflorescence near the base. Efflorescence is a white mineral bloom that means water is moving through the block. Persistent bloom means the drainage behind the wall is failing.
- Fence posts pulling away from the wall. Anchor or sleeve failures where the post meets the block face. Westminster’s clay-heavy soils hold water, and a post that wobbles has likely lost its footing anchorage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Unilock fence wall pricing in Westminster runs $3,500 to $9,000 for a typical residential fence wall. The number moves with linear footage, block series (Brussel is generally less than Yorkville), height, cap selection, and the digging. A wall that needs the old base excavated, a footing re-poured, or a drainage bed rebuilt lands at the top of that range. A straight block replacement over a solid base sits lower.
Every quote is written before any work starts: line items for demolition, base prep, gravel and drainage, block units, cap and adhesive, and labor, plus permit responsibility where the height crosses Westminster’s threshold. The written price does not move at the door. Completed work carries the 365-Day Done Right Promise: if the wall fails inside a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things yourself: measure the block face dimensions, photograph the failing joint, and note where the wall loses plumb. That information helps us match the correct series before we arrive. What you should not attempt is re-laying a base course or resetting a wall that has bulged. A fence wall carries real weight, and a poorly bedded base fails again within one season. Getting the gravel compaction right, the drainage behind the wall correct, and the cap adhesive clean takes a proper crew. Background-checked, uniformed technicians on every job means you know who’s on site.
Call (833) 954-5086 to schedule your free estimate. A live person answers, day or night, and the written price comes before the first block is touched.
FAQs

How long does a Unilock fence wall last in Westminster? A properly built Unilock fence wall typically lasts 25 to 40 years with a sound base and drainage; the failure point is almost always the base, not the block. Westminster’s clay soil holds moisture, so a base with correct gravel and drainage outlasts one that was bedded on native dirt. Call (833) 954-5086 for a site assessment.
Can a failing Unilock fence be repaired instead of replaced? Often yes. A single damaged block, a rocking cap, or a short section that lost plumb can be repaired without rebuilding the whole run. Extensive bulging or multiple cracked courses usually means the base has failed and needs rebuilding. We quote both options in writing so you can compare. Call (833) 954-5086 for an estimate.
How long does a replacement take? A section repair is often finished in a day; a full fence wall replacement usually takes two to four days, depending on footage and base condition. Because we don’t promise same-day turnarounds on planned installs, we give you a real schedule in writing before work starts.
How do you source the replacement block? We match the existing series and color from a pulled unit and order through Unilock’s authorized dealer network, so the replacement is the correct spec and carries the manufacturer’s backing. We don’t carry parts on a truck; the block is ordered to your job. Estimates are free, so call (833) 954-5086 for an exact match and quote.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












