







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Westminster Owner’s Guide
Unilock kitchen remodeling in Westminster typically runs $14,000 to $45,000 installed, depending on whether you’re refreshing surfaces or rebuilding the room. We schedule Westminster estimates within the week and confirm the date in writing before anyone shows up. Most owners land on this page after noticing the thing they can’t unsee: a wall-system or surface detail that no longer lines up, a seam that’s opening, or a finish that’s chalked and rough in the afternoon sun. In Westminster’s inland-coastal mix, that usually starts on the sun-facing wall.
Key Takeaways
- Unilock kitchen remodeling in Westminster: $14,000 – $45,000 installed.
- Cabinet installation alone: $4,000 – $13,000. Countertops: $2,000 – $6,500.
- We write the price before work starts. The 365-Day Done Right Promise covers the finished work for a full year.
- Bradford Remodeling Co Westminster is an independent contractor, not affiliated with Unilock.
Which Unilock Models This Applies To

Let’s be straight about what Unilock is and isn’t. Unilock is a hardscape and wall-system brand – pavers, retaining wall blocks, step units, and the anchoring hardware that ties them together. Unilock does not make kitchen cabinets, countertops, or appliances. So when a Westminster homeowner says “my Unilock kitchen,” what they almost always mean is one of two things: a wall-system feature built into the kitchen – an interior accent wall, a raised hearth, a half-wall or peninsula face – or a part from the Unilock system that failed and is now showing inside the room above it.
That distinction matters for sourcing. Unilock’s wall systems are sold by series, and the block profile, height, and anchoring clip pattern differ between them. The retaining wall and freestanding wall lines are not interchangeable with the step and cap units, and the color names don’t cross over cleanly between collections. If a block or cap fails, the replacement has to match the series and the run – not just the color name on a receipt.
How to identify the right part
- Check the original project paperwork or the contractor’s spec sheet for the Unilock series name.
- Measure the block or cap: unit height, unit depth, and face width to the nearest 1/8 inch.
- Photograph the exposed face in flat daylight, plus one shot of the anchoring pattern if it’s visible from the failed edge.
OEM vs. aftermarket: for Unilock wall systems, we specify the matching Unilock series. Aftermarket lookalikes run a slightly different face profile and won’t key into the existing run, so you get a visible seam and a weak joint. On cabinets and surfaces we work with KraftMaid, Cambria, and Silestone, each with its own documented spec – traceable, not guessed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
These are the five failures we see most in Westminster kitchens, and the cause behind each.
- A step or cap that rocks underfoot. The bedding course has settled or the adhesive bond failed. Small movement becomes cracked units within a season of foot traffic.
- A hairline crack running through a block face. Usually moisture got in, then expanded and contracted through Westminster’s warm days and cool coastal nights. It’s a materials-and-drainage problem, not just a crack.
- Efflorescence – the white chalky bloom. Salts migrating out through the face as moisture moves. Cosmetic at first, but it flags a water path that will keep working on the joint.
- A wall joint that’s opening at the corner. Movement in the base or a missing anchor. Left alone, the wall leans and the corner separates further.
- Finish chalked or faded on the sun-facing side. UV exposure on the exposed face. Normal aging, but it tells you the run is past its service window.
Replacement Cost & What’s Included

Here’s how Unilock-related kitchen work prices out in Westminster. These are installed ranges – parts and labor together, so you’re not chasing a second invoice.
| Scope | Installed Range (Westminster) |
|---|---|
| Full kitchen remodel (Unilock wall feature included) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: how much of the existing Unilock run can be matched and saved, whether the base under the feature needs rebuilding, and the surface and cabinetry choices. The price is written before a tool comes out, and it doesn’t move at the door. Every completed project carries the 365-Day Done Right Promise – a full year of written coverage; if the work fails inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Checking is one thing; resetting a Unilock wall unit is another. You can safely photograph the failed piece, measure it, record the series name, and note where the water is tracking. Those four things are genuinely useful and don’t put you at risk.
Where DIY goes wrong: resetting a wall block or cap means rebuilding the bedding and the anchor, and a unit that isn’t bedded and keyed correctly will re-fail – often within weeks. If the feature is structural or tall, or the base is compromised, stop there. That work needs a trained crew. We’re background-checked and uniformed, so you know who’s at your door, and a live person answers the phone at (833) 954-5086 when you call.
FAQs

How long does a Unilock wall feature in a kitchen last? Expect 20 to 30 years for a well-built, drained wall system. In Westminster’s warm-inland, cool-coast swing, failures usually trace to water and base movement long before the block itself wears out.
Can it be repaired instead of replaced? Often, yes. Isolated caps, steps, or single units can be reset or swapped if the matching series is available and the base is sound. A run that’s leaning or cracking through multiple units usually needs a rebuild.
How long does the swap take? A single-part repair is typically a day. A kitchen remodel that includes a Unilock feature runs one to several weeks depending on scope. We confirm the timeline in writing up front.
How do you source the part? We match the Unilock series and unit dimensions to your existing run, then order through documented channels so the spec is traceable. That keeps the new piece keying into the old as it should.
Get Your Written Price
If a Unilock feature in your Westminster kitchen is failing, the cheapest move is a written scope before any work starts. We’ll measure, photograph, and match the series, then hand you a fixed price and the 365-Day Done Right Promise in writing. Call Bradford Remodeling Co Westminster at (833) 954-5086 for a free estimate – a real person picks up.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












