







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The Westminster Owner’s Guide
Ameristar fence installation in Westminster typically runs $3,500 – $9,000 installed, depending on linear footage, panel style, and gate count. We handle Ameristar-compatible aluminum and ornamental fence work with a written price before any work starts, and we work from a documented brand roster that includes KraftMaid, Cambria, and Silestone on the interior side of the house. Timing depends on material lead times, not dispatch promises.
Most Westminster owners don’t call us because a fence looks bad. They call because a post has started leaning after a Santa Ana wind event, a gate has dropped and drags on the concrete, or a powder-coated picket has begun to chalk and fade after a few summers of inland Orange County sun. Ameristar’s aluminum systems are built to last decades, but installation detail and soil conditions decide whether you get that life. We’re an independent service provider and not affiliated with Ameristar, so our only job is matching the right system to your property and installing it squared away.
Which Ameristar Models This Applies To

Ameristar builds several residential aluminum lines, and the differences matter at the install stage. The Montage and Legend series are the two most common on Westminster residential lots; Montage panels typically arrive pre-assembled, while Legend components are assembled on site. Styling names (Barbados, Lakeside, Transmark) refer to picket pattern and rail count, and they change the panel weight and the hardware spec. If you’re replacing one section, the model line, panel width, and post spacing all have to match or the new panel won’t rack with the old one.
Identify your fence by measuring the panel width post-to-post (common residential widths are 6 ft and 8 ft), the rail spacing, and the post cap shape. Ameristar stamps model information on many post caps and brackets, and the original installer’s paperwork is the fastest path. On OEM versus aftermarket: for exposed posts, brackets, and gate hardware, genuine Ameristar parts fit without improvisation and keep the warranty path clean. For internal components like standard self-closing hinges or latches, a quality aftermarket equivalent from a known hardware maker is a reasonable call when the OEM part is on backorder. We don’t stock parts or carry them on a truck; we source what your fence needs and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
Some of what follows is an install problem, some is a material problem, and some is Westminster soil and weather doing what it does.
- Posts leaning or out of plumb. Usually a footing issue: too shallow, too little concrete, or set in loose fill. Westminster’s older tracts have plenty of both, and a leaning post rarely fixes itself.
- Gate sagging and dragging on concrete. The gate frame carries more load than a straight run, and the hinge post absorbs the torque. A hinge post set in a shallow footing starts to rotate, and the gate drops.
- Racking panels after wind. Aluminum panels are designed to rack with grade changes, but a run installed with the bottom gap too tight, or with the wrong bracket, will bind and pop under wind load.
- Chalky, faded powder coat. UV exposure fades any coated finish eventually. Chalking with a whitish film usually means the finish is breaking down, not just dirty.
- Loose or missing pickets and brackets. Fasteners back out of aluminum over years of thermal expansion. A single missing bracket lets a panel work against the next one.
If two or more of these show up on the same run, the fence isn’t failing at one point; the install setup is likely the problem.
Replacement Cost & What’s Included

For Westminster, Ameristar-compatible aluminum fence installation runs $3,500 – $9,000. The range moves with linear footage, panel height (4 ft, 5 ft, and 6 ft all price differently), gate count and gate width, and how many existing posts can be reused. A typical 100-ft run with one walk gate sits toward the middle of that range. Demolition and haul-away of the old fence, new footings set to depth, panel and gate install, and a post-install walkthrough are included in that written figure.
Parts and labor are priced separately and line-itemed so you can see what each piece costs. Every install we complete is covered by the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge. The only number that moves is one we haven’t written down, and we don’t quote that way.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the inspection side yourself. Walk the line, check plumb on the posts with a level, open and close every gate, and photograph any panel that’s binding or racking. Writing down measurements and model details before you call saves time for everyone.
Where DIY goes wrong: pulling posts and resetting footings is where most homeowner fence projects stall. Footing depth, concrete volume, and plumb all have to be right or the whole run fails again in a couple of seasons, and a 6-ft aluminum panel is heavy, awkward, and unforgiving on hands and shoulders. Getting a post footing set wrong is not a small mistake. One owner’s afternoon turns into an unplumb fence you’re back to paying someone to fix. Call (833) 954-5086 to schedule your free estimate, and we’ll tell you plainly what’s salvageable and what isn’t.
FAQs

A properly installed Ameristar aluminum fence is a 20-to-30-year product, and the powder coat typically outlives the installation if the footings are right. In Westminster’s inland climate, the sun does the most damage to finish, while soil movement and wind stress do the most damage to posts and gates.
Often yes. If the panels and posts are sound and the issue is a gate hinge, bracket, or a single leaning post, a targeted repair is cheaper and faster than a new run. We’ll tell you straight at the estimate which parts are worth keeping.
A standard residential run with one gate is usually a one-to-two-day job, assuming the footing concrete cures properly and all the parts are on hand. Larger runs, multiple gates, and jobs needing demolition of a concrete-set fence take longer.
We match the model line, panel width, and hardware spec, then source from suppliers who carry genuine Ameristar components. We don’t stock parts locally or carry them on a truck; we order against your specific measurements and hardware, so what shows up fits the fence you have.
Get Your Free Estimate
If your Ameristar fence needs attention in Westminster, call Bradford Remodeling Co Westminster at (833) 954-5086 to schedule your free estimate. You’ll get a written price before any work starts, background-checked and uniformed technicians on the job, and a live person who answers the phone around the clock. Every completed install carries the 365-Day Done Right Promise, and if the work doesn’t hold, we come back and correct it at no charge.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












