







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Westminster Owner’s Guide
Therma-Tru-compatible fence installation in Westminster runs $3,500 to $9,000 installed, and most jobs are scheduled within days, not weeks. That range covers removal of the old fencing, Therma-Tru-matched components, hardware, and the workmanship guarantee. We install Therma-Tru-compatible fencing and door-fence systems for homeowners here in Westminster, and we quote the whole job in writing before a tool comes out.
Most Westminster owners don’t start by shopping for a part. They start by noticing a sag at the gate, a corner post that leans after a Santa Ana wind, or a latch that suddenly won’t catch. Then they look closer and find rot, cracked hinge brackets, or hardware corrosion that’s been quietly spreading for two or three seasons. That’s usually the moment the call comes in.
Which Therma-Tru Models This Applies To

Therma-Tru builds exterior doors, entry systems, and fence-related components under several product lines, and the fencing and gate hardware we install is matched to those specifications rather than pulled from a generic bin. Before we order anything, we identify your exact model from the label on the door edge or fence panel, the model number stamped on the frame, and physical measurements down to the sixteenth of an inch. A Therma-Tru entry system built for a fiberglass door, for example, uses different hinge and stile dimensions than a steel-door system – and a fence gate built around one won’t accept the other’s hardware without modification.
This is where general-contractor shortcuts fail. A box-store gate kit will often “fit” a Therma-Tru opening long enough to close it once, then bind, rattle, or pull the screws loose within a year. OEM Therma-Tru components are built to the exact stile profile and hardware mounting pattern of your system. Quality aftermarket equivalents exist for some thresholds and weatherstripping, and we’ll tell you which ones we trust and why – but for gate hardware, hinge brackets, and structural connectors, OEM is usually the right call. We are an independent service provider, not affiliated with Therma-Tru, and we source OEM parts through authorized channels.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
These are the five symptoms we see most in Westminster homes:
- Sagging gate or a gate that drags. The hinge-side post is pulling out of the ground or the hinge bracket has bent. This compounds fast – a sagging gate puts extra load on every connector, which accelerates the next failure.
- Latch that won’t catch or pops open. The latch strike has shifted out of alignment, often because the post has moved slightly with soil settling or the latch hardware has worn at the pivot point. In a coastal-influenced climate like Westminster’s, humidity cycles make this more common than in dry inland markets.
- Visible rot at the base of posts or at hardware penetrations. Water gets in around screw holes and hinge brackets, then wicks into the wood or composite substrate. In our climate, base rot shows up two to three seasons sooner than most homeowners expect.
- Corroded or pitted hardware. Salt air moves inland from the coast, and lower-grade steel fasteners pit within a couple of years. Once a hinge pin or latch spring is compromised, replacement is the only fix.
- Loose or missing pickets, rails, or panel sections. Wind load and thermal expansion put stress on fasteners and rail connections. A panel that’s separating at the rail is usually a sign the fasteners have backed out or the substrate has split.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Westminster, Therma-Tru-compatible fence installation runs $3,500 to $9,000 installed. The range is driven by run length, gate count, hardware grade, and whether we’re replacing a section or a full envelope. A single gate with a post replacement sits at the low end. A full run with multiple gates, premium hardware, and a Therma-Tru-matched entry gate assembly sits near the top.
Every quote is itemized: parts, labor, removal, and disposal – all in writing, all before work begins. There’s no “we’ll figure it out on site” pricing. All completed work carries our 365-Day Done Right Promise: a full written guarantee on the installation, and if anything we installed fails within that year, we return and correct it at no charge. We also install and specify KraftMaid, Cambria, and Silestone products on other remodel work – same documented-brand approach applies here.
DIY or Call Us?
You can safely inspect the job yourself. Check post bases for softness with a screwdriver – if it sinks easily, there’s rot. Look at hinge brackets for bending or wallowed screw holes. Confirm the latch alignment by closing the gate and watching where the strike meets the latch. That much tells you whether the problem is cosmetic or structural.
Where DIY goes wrong is at the structural connection. Replacing a post requires the right footing depth for Westminster’s soil, correct concrete mix, and plumb tolerance tight enough for a Therma-Tru-matched gate to swing without binding. And a gate that’s under-built will pull itself apart within a season. That’s where a trained installer saves money over the long run. If the inspection turns up rot, a bent post, or hardware that’s failing, call us at (833) 954-5086 and we’ll put a written number on the fix.
FAQs

With properly specified hardware and correct footing depth, you should get 15 to 20 years out of the structure and 8 to 12 years out of the hardware. Westminster’s coastal-influenced humidity shortens hardware life compared to inland markets, so we recommend stainless or marine-grade fasteners on every job here.
Often yes. A single failed hinge, misaligned latch, or one rotten post can usually be repaired without replacing the run. The exception is when rot has spread into more than one structural member or the substrate has split at multiple fastener points – at that stage, replacement is the honest answer. We’ll tell you which one you’re looking at before we quote the job.
A single gate repair or replacement runs a half day. A full run with two or three gates typically takes one to two days depending on footing depth and concrete cure time. Every job is scheduled with a written start date and a written completion window before we arrive.
We identify your exact model from the door-edge label, frame markings, and physical measurements, then order through authorized OEM channels. For parts where a quality aftermarket equivalent is genuinely equivalent, we’ll show you the spec comparison and let you choose. We don’t stock parts – nothing gets pulled off a truck – so what you get is matched to your actual unit, not a generic fit.
Call (833) 954-5086 to schedule your free estimate. We’ll inspect the failing component, identify the exact Therma-Tru part your system needs, and give you a written price range before any work starts. Live person answers, any hour.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












