A Bradford company - serving Westminster, CA
An open living room and dining area after a whole-home remodel
M
Mr-Glass · Westminster

Mr-Glass Windows & Doors in Westminster, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Westminster
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Windows & Doors: The Westminster Owner’s Guide

We service and replace Mr-Glass windows and doors for Westminster homeowners, and a full window replacement typically runs $4,500 – $15,000, while impact-rated window installation runs $8,000 – $25,000 depending on count and glass package. Most owners don’t discover a failed part until a window won’t latch, a door drags on its threshold, or they find fog between the panes after a cool morning. That fog is the giveaway: the sealed insulating glass unit has lost its desiccant seal, and no amount of wiping fixes it. In Westminster’s coastal-edge climate, with marine layer pushing inland and afternoon sun hitting south- and west-facing glass hard, we see seal failures and hardened weatherstripping more often than anything else on Mr-Glass units.

Call (833) 954-5086

Bradford Remodeling Co Westminster is an independent service provider. We’re not affiliated with Mr-Glass, but we work on their windows and doors regularly and know what fits.

Which Mr-Glass Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Mr-Glass covers a wide span: single-hung and double-hung vinyl units, horizontal sliders, casement windows, patio sliding doors, and entry door systems with their own hardware lines. Fit depends less on the brand name stamped on the frame and more on three measurements you can take yourself: the visible glass size, the overall frame dimensions, and the profile depth of the sash. Pull the manufacturer label off the upper corner of the glass or the jamb, photograph it, and bring it to your estimate. That label carries the series code and the original glass spec.

The OEM-versus-aftermarket decision matters here. Mr-Glass proprietary sash locks, rollers, and tilt-latch hardware are model-specific – a generic roller from a big-box bin will fit the track and then bind within a season. For glass units, though, the sealed IGU itself is a commodity: any glass shop can cut and seal a matching unit at the same thickness and tint. We match OEM hardware when it’s available and specify a quality equivalent when it isn’t, and we tell you which one you’re getting in writing before we order.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Windows & Doors Is Failing

  • Fog or condensation between the panes. The IGU seal has failed and moisture is trapped inside. It won’t clear, and the unit’s insulating value is already gone.
  • A window that won’t latch or lock squarely. Usually a worn sash lock, a dropped hinge, or a frame that’s shifted. On a slider, a flattened roller is the common culprit.
  • The door dragging on the threshold or scraping the jamb. Settled hinges or a sagging slab. Left alone, it chews the weatherstrip and lets water in at the sill.
  • Daylight or a draft at the perimeter. Failed weatherstripping or a cracked glazing bead, both of which harden faster in our dry, sunny stretches.
  • Water staining on the interior sill or jamb. A failed seal or a clogged weep channel. This one can rot the rough sill behind the frame if it’s ignored.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

In Westminster, window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000. A single failed IGU replacement on a Mr-Glass unit sits at the low end of that window replacement range, while a full-house re-glaze or a patio door swap pushes toward the top. What moves the number: window count, whether we’re replacing glass only or the full unit, impact versus standard glass, and access on two-story homes.

Here’s what’s included and what isn’t, stated plainly: parts, labor, disposal of the old unit, and re-sealing the opening. You get a written price before any work starts, itemized line by line – no numbers that move at the door. Every install carries our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself: clean and inspect the weep holes, test the latch and lock by hand, look for fog between panes, and photograph the model label. That’s diagnostic, not repair.

Where it goes wrong is the actual swap. Replacing an IGU means handling a heavy, brittle glass unit, setting it dead square in the sash, and re-sealing it so it doesn’t leak – done wrong, you get a new leak or a cracked pane. Re-hanging a patio door or resetting a frame is the same story: it’s a two-person, measurement-critical job. If you’re not sure, call us at (833) 954-5086 and we’ll tell you straight whether it’s a repair or a replacement.

Frequently Asked Questions

A galley kitchen opened up to the dining room with a new peninsula

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished backyard cottage with a small covered porchA remodeled primary bathroom with a soaking tub and walk-in showerA walk-in shower with large-format tile and a built-in nicheA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Westminster

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Westminster team

A local vetted partner works across Westminster and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5086
Local Service Coverage

Request a Free Estimate in Westminster

Tell us what you need - Bradford Remodeling Co Westminster responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch