







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Westminster Owner’s Guide
CGI-compatible fence installation in Westminster runs $3500 to $9000 installed, depending on linear footage, material, and property-line conditions. Bradford Remodeling Co Westminster handles CGI fence work as an independent service provider, not affiliated with CGI, and the range above is the written number we put in front of you before any work starts. Most Westminster owners don’t go looking for fence problems. They find them the same way: a gate that no longer latches square, a post that shifts after a Santa Ana wind event, or a panel that starts leaning toward the neighbor’s side after a wet winter. By the time the lean is visible, the footing has usually been losing the fight for a season or two. The part didn’t fail overnight. The ground under it did.
Which CGI Models This Applies To

CGI fence systems show up on a range of properties across Westminster, from small side-yard runs in tract neighborhoods to full perimeter enclosures on larger lots. The lines we see most often are wood-composite, vinyl, and aluminum panel systems, and they don’t share hardware. A bracket that fits one series won’t seat on another, which is where most online ordering goes wrong.
Before you order anything, identify the system three ways: the manufacturer label on the inside of the gate frame or the underside of a rail cap, the actual post spacing measured center-to-center, and the panel thickness at the top rail. CGI panels and posts are sized as a matched set, and a post ordered for one panel thickness will leave a gap or bind the rail on another. Photo the label, measure the spacing, and write the numbers down. That set of three is what gets you the right part the first time.
On the OEM-versus-aftermarket question: for a CGI fence, aftermarket hardware is fine for brackets, caps, and fasteners if the gauge matches, but posts and rails are where we stay with the matched system. A mismatched post is the single most common cause of a fence that looks right on install day and leans within two summers. If you’re also updating cabinetry or surfaces inside the house, we work with KraftMaid, Cambria, and Silestone on those projects too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
- Posts that move when you push on them. A post with any give at the base has lost its footing, usually from soil settlement or a footing that was never set below the local frost and moisture line. In Westminster, winter rain soaking into a shallow footing is the usual culprit.
- Gates that drag or won’t latch. A gate that suddenly drops is almost always a hinge-side post shifting, not a hinge problem. Replacing the hinge is a waste of money if the post is the actual issue.
- Rails pulling out of the post caps. Loose rails mean the fasteners have backed out or the post cap has cracked from sun exposure. This is one of the more common late-summer failures in Southern California heat.
- Visible lean across multiple panels. A single leaning panel is a local problem. A run that leans together points to a shared footing failure or soil movement along the line.
- Split or cracked panels at the fastening points. Repeated thermal expansion and contraction works fasteners loose, and once water gets behind the fastening point, the material degrades from the inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

CGI fence installation in Westminster is $3500 to $9000 installed. That range covers the full scope: removal of the failing run, footing work, matched posts and panels, hardware, and cleanup. The number moves based on linear footage, how many posts need replacement versus repair, gate hardware, and whether the property line needs any grading work before footings can be set.
We don’t quote parts and labor separately in a way that hides the total. You get a written price before any work starts, itemized by scope, so you can see exactly what you’re paying for and nothing appears at the door. Every CGI fence installation we complete carries the 365-Day Done Right Promise: a full written guarantee, and if the work fails inside that window, we come back and correct it at no charge. That guarantee is in your hand at close, along with a clean site and a documented scope.
DIY or Call Us?
What you can safely check yourself: whether the label is legible, whether the gate hinges are tight, whether the rail caps show cracks, and whether the posts have any movement at the base. What goes wrong for most people is the footing. Setting a fence post in Westminster soil requires getting the depth right, the concrete mix right, and the post plumb across the whole run, not just one post. A fence that’s plumb at one end and off at the other will lean within one season.
The other issue is the part match. Ordering a post or panel that is close but not correct is expensive, and it doesn’t show up as a problem until the fence starts moving. We install CGI-compatible fence systems with our background-checked, uniformed technicians, and we bring the right hardware because we confirmed the system before we arrived. Call (833) 954-5086 and we’ll schedule a free estimate. Live person answers the phone, 24/7.
FAQs

Most CGI fence systems hold up for 15 to 20 years with normal care, though coastal humidity and Santa Ana wind cycles can shorten the footing life if posts weren’t set deep enough. The panels usually outlast the footings. When we look at a failing CGI fence in Westminster, the material itself is usually fine; it’s the ground that gave out first.
Sometimes. If one post and a couple of panels are the problem, a targeted repair is often the right call. If multiple posts are shifting, repair is usually a short-term fix and replacement makes better financial sense. We’ll tell you which one you’re looking at after we see the fence. Call (833) 954-5086 for a free estimate and a straight answer.
A typical residential CGI fence run in Westminster takes one to three days, depending on footage and how many posts need new footings. Removing the old fence adds time if the concrete footings have to be broken out. You get the timeline in writing with the written price before we start.
We confirm the system by label, post spacing, and panel thickness before any order goes in. That three-point check is what prevents the mismatched-post problem that causes most early fence failures. We don’t carry parts on a truck. We confirm the match, then source it. Call (833) 954-5086 to set up your free estimate.
CGI fence work in Westminster should come with a written price, a documented scope, and a guarantee you can hold onto. Bradford Remodeling Co Westminster works with a documented roster of name-brand materials, and every CGI fence installation is squared away before we leave the site: clean property line, written scope, signed guarantee in your hand. Call (833) 954-5086 to schedule your free estimate and get the number in writing before anything starts.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












