







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Westminster Owner’s Guide
CGI-source bathroom remodeling in Westminster runs $9,000 – $28,000 installed, depending on scope, finishes and whether the rough-in stays where it is. We handle the full build: demolition, waterproofing, tile, vanity, lighting and fixtures, matched to the fixtures and materials you’ve already specified from CGI. Small bathroom remodels in that same line land at $5,000 – $12,000 when the layout holds and only surfaces and fixtures change.
Most Westminster owners don’t start with a remodel. They start with a part that failed. A vanity that’s been soft at the baseboards since last winter, a shower pan that flexes underfoot, a builder-grade faucet that drips no matter how many cartridges you swap. Then a contractor quotes a full tear-out because “you can’t just replace that.” The real question is whether you’re fixing a component or rebuilding the room, and that decision changes the price by a factor of four.
We’re Bradford Remodeling Co Westminster, an independent contractor. We’re not affiliated with CGI, and we don’t represent them. What we do is install and replace the fixtures, cabinetry and surfaces homeowners are trying to match to CGI-specified bathrooms across Orange County, with a written price in your hand before demolition starts.
Key Takeaways
- Full bathroom remodel in Westminster: $9,000 – $28,000. Small bath, surfaces and fixtures only: $5,000 – $12,000.
- Component swaps (vanity, shower, tub conversion) price separately, and we quote them line by line.
- Written price before work begins, always. No numbers that move once the crew is on site.
- 365-Day Done Right Promise on every completed project. If the work fails inside a year, we come back and fix it at no charge.
- Background-checked, uniformed technicians. You know who’s coming to the door before they arrive.
Which CGI Models This Applies To

CGI’s residential bathroom line splits into vanity and cabinetry programs, shower and tub surrounds, and fixture and finish packages. The compatibility problem isn’t brand level, it’s series level. A vanity from one CGI series won’t accept the door and drawer fronts from another, and the cabinet box depths differ between base configurations by a half inch or more. That half inch is the difference between a countertop that sits flush and one that needs a filler strip.
Before we quote anything, we identify what you actually have. Three places to look:
- Inside the vanity door or drawer box. CGI typically places a label with the series or model code there, not on the front.
- Under the sink, on the back panel. Finish codes and production marks are usually stamped or stickered where moisture hasn’t reached.
- The shower valve trim plate. Pull the trim and the rough-in valve body carries a model stamp. This matters because trim kits are sold separately from rough-in valves and the two have to match.
On the OEM-versus-aftermarket call, our position is simple: where CGI specifies a finish that has to match existing cabinetry or tile, OEM or factory-equivalent is the only way to keep the seam invisible. Where the part is behind a wall or under a floor, a documented aftermarket equivalent with a manufacturer spec sheet is often the smarter spend, and we’ll show you both prices in writing so you can decide. For other brands in the same bathroom category, we also service KraftMaid, Cambria and Silestone installations.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Westminster sits close enough to the coast to keep indoor humidity high through spring and into June gloom, and that shows up in bathroom materials faster than most homeowners expect. Here’s what we see, and what’s actually going on underneath.
- Shower pan flexes or “gives” underfoot. The mortar bed or setting material under the tile has broken down and water is getting to the substrate. A soft pan always means the waterproofing layer beneath it is compromised, whether or not you see a leak yet.
- Grout cracking at the tile-to-tub or tile-to-floor joint. That seam moves with the framing; rigid grout can’t. Flex in the joint is normal, but repeated cracking after repair points to a substrate that’s shifting, not just a cosmetic gap.
- Vanity base swelling or dark staining at the kick plate. Moisture wicking up from a damp floor or a slow supply-line weep. Once the MDF or particleboard base swells, it doesn’t return to shape, and this is the single most common failure we find in Westminster bathrooms.
- Water staining on the ceiling below the bathroom. A drain or supply line leak that’s been running long enough to pass through the floor assembly. Get it looked at before the drywall above it starts to sag.
- Mildew that returns within weeks of cleaning. Recurring mildew at the same caulk line or ceiling corner means moisture is being trapped, not ventilated. That’s a fan CFM or exhaust-run problem as much as a surface problem, and repainting or recaulking treats the symptom, not the cause.
Replacement Cost & What’s Included

Here are the Westminster numbers we quote, installed, with labor, materials and haul-away included:
| Scope | Installed price |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What pushes a Westminster bathroom toward the top of the full-remodel range: moving the drain or supply lines, converting a tub to a curbless shower with a linear drain, tile work that runs full height, and any permit-driven rough-in changes. What holds the price down: keeping the plumbing where it is, reusing sound drywall outside the wet zone, and choosing a stocked vanity footprint over a custom one.
Parts and labor are quoted separately and in writing, so you can see what you’re paying for material and what you’re paying for installation. Every completed project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Honest split. What you can safely do yourself: pull the vanity label and read your model code, check under the sink for active drips with a dry paper towel, re-caulk a failing seam with a mold-resistant silicone, and clean the exhaust fan grille so it actually moves air. None of that puts you at risk.
What we’d stop you on: anything involving the shower pan, the waterproofing layer, or the drain assembly. Getting the pan wrong doesn’t fail dramatically. It fails quietly, over a year, into the floor assembly below. A slow shower pan leak in a Westminster bathroom can rot framing and subfloor long before you see a stain on the ceiling, and by then the repair is a structural job instead of a surface one. Same for anything behind the wall: moving a supply line or opening the valve body to swap a cartridge on a valve that won’t shut off cleanly.
Plain version: inspect and re-caulk, don’t re-waterproof. If the pan is soft, the base is swelling, or there’s water showing up below the room, that’s ours. Call (833) 954-5086 and we’ll look at it and give you a written number before anything comes out.
FAQs

A properly built bathroom with correct waterproofing and a functioning exhaust fan runs 20 to 30 years on the tile and substrate, and 10 to 15 on the grout, caulk lines and fixtures. In Westminster’s coastal humidity, the parts that fail first are always the caulk joints and the vanity base, not the tile itself. The three things that shorten lifespan most are a shower pan set without a mortar bed, an exhaust fan that vents into the attic instead of outside, and no annual caulk check. Call (833) 954-5086 for an exact quote on your bathroom, estimates are free.
Sometimes, and we’ll say so if it’s true. A dripping faucet usually needs a cartridge, not a new faucet. A cracked grout line or a failed caulk seam is a repair, not a remodel. What doesn’t get repaired: a shower pan with a broken mortar bed, a vanity base that’s already swollen, and any waterproofing layer that’s been breached. Those are replacement scopes because patching over them just moves the failure behind a new tile job. We quote the repair and the replacement both, in writing, and let you choose. Call (833) 954-5086 for that estimate.
A vanity-only swap runs one to two days. A shower replacement is three to five working days, mostly drying time. A full bathroom remodel in Westminster runs two to four weeks once demolition begins, and the gate is plumbing rough-in inspection and the waterproofing cure, not labor speed. We give you the schedule in writing with the price, so you know the sequence before demo day. Call (833) 954-5086 and we’ll build the timeline around your bathroom.
We source through manufacturer and distributor channels and give you the part number in writing before we order. Whether it’s OEM or a documented aftermarket equivalent is a decision we put in front of you, not one we make quietly: for visible finishes we match the original spec, and for concealed parts we show both options and their spec sheets. We don’t carry stock, and we don’t claim to have parts on a truck. Nothing gets ordered until you’ve approved the written line item. For other brands we also install KraftMaid, Cambria and Silestone, among a longer documented roster including Kohler, Moen, Wellborn and Caesarstone. Call (833) 954-5086 for a free estimate.
Squared Away, Every Time
What you should expect from us at job close: a clean site, the scope documented against the original written price, and a signed 365-Day Done Right Promise in your hand. No change orders that appear at the door, no voicemail when you call. A live person answers the phone 24 hours a day, seven days a week, and our technicians bring up to 22 years of experience to the bathroom.
Call (833) 954-5086 to schedule your free estimate. We’ll walk the bathroom, identify what you’re actually working with, and put a real range in writing before anyone picks up a tool.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












