







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Home Additions & ADU: The Westminster Owner’s Guide
Tamko doesn’t manufacture additions or ADUs – Tamko makes the roofing, waterproofing, and decking materials (TW-50, TW-60, the Heritage shingle line, and the JW/WaterSeal membranes) that sit on top of and around a new addition, so what fails on a Westminster addition is almost always a Tamko component at the roof deck, the roof-to-wall tie-in, or the low-slope transition, not the addition’s structure itself. Installed additions in Westminster typically run $45,000 – $130,000, while full ADU construction runs $90,000 – $220,000, depending on footprint, site access, and whether the unit is attached or detached. Owners usually discover the failure the same way: a brown water stain blooming across a new ceiling in the first wet season, granules collecting in the downspout, or a small roof leak that shows up only at the tie-in over the addition.
We’re Bradford Remodeling Co Westminster. We install Tamko roofing and waterproofing as part of the additions and ADUs we build in Westminster, and we’re an independent contractor – not affiliated with Tamko. Here’s the straight answer on identifying the right component, pricing the fix, and knowing what to do.
Key Takeaways
- Tamko components on an addition cover the roof deck, the roof-to-wall tie-in, and low-slope transitions – not the addition’s frame.
- Installed Westminster additions run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- Match the component to the exact Tamko product – Heritage vs. a low-slope membrane are not interchangeable.
- Written price before work starts, and every completed project carries the 365-Day Done Right Promise.
Which Tamko Models This Applies To
You don’t replace “a Tamko part” – you replace a specific Tamko product used at one of three places on the addition: the roof covering, the underlayment or membrane, or the flashing and edge metal. On pitched roofs over an addition, the product is almost always from the Heritage line – Heritage, Heritage Vintage, Heritage Woodgate – identified by a stamp on each shingle bundle and by granule color and tab profile on the finished roof. On low-slope sections (a flat-roof addition, a shed dormer, or the transition where the addition roof meets the existing house), the product is a Tamko self-adhered membrane such as TW-50 or TW-60, or a WaterSeal product. That’s the compatibility gotcha most homeowners don’t know: the TW-50 and TW-60 membranes come in specific roll widths and thicknesses, and a contractor who substitutes a generic peel-and-stick underlayment for a low-slope tie-in is not installing a Tamko product – which means it may not match the manufacturer’s specification or warranty. Read the bundle label or membrane wrapper before anything is ordered. OEM Tamko products are the correct choice here; aftermarket equivalents exist for basic flashing, but the roof covering and waterproofing should be brand-matched wherever the existing roof is Tamko.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Home Additions & ADU Is Failing
How you know the component has gone bad, and what’s actually happening underneath:
- Water staining on a new ceiling in the addition. This almost always traces to the roof-to-wall tie-in or a low-slope membrane that was lapped the wrong way – water runs uphill under a shingle and finds the seam.
- Granules in the gutters or at the downspout base. Heavy granule loss on a Heritage roof means the asphalt mat is breaking down faster than it should – sometimes from a defective batch, more often from foot traffic during install.
- Curling, lifting, or “fish-mouthing” shingle tabs. Tabs that lift at the edges are losing their seal-down, which lets wind-driven rain under the field and is common on the exposed edges of a shed dormer.
- Soft spots or bubbling in a flat-roof membrane. A TW-50 or TW-60 membrane that blisters or feels spongy has trapped moisture beneath it – the addition’s substrate is wet, not the membrane itself.
- Rust streaks or loose edge metal at the roof perimeter. Drip edge and rake edge metal that loosens lets water wick behind the fascia and shows up first as a rust stain on the soffit below.
Replacement Cost & What’s Included

Pricing for Tamko-related roof and waterproofing work on a Westminster addition breaks down by what’s actually being repaired, not by the part alone:
- Targeted flashing or tie-in repair: $400 – $1,800 (Roof Repair range)
- Full roof-covering replacement over an addition: $8,000 – $20,000
- Metal or steep-slope components: $15,000 – $40,000 where specified
- Complete attached addition including roofing and tie-in: $45,000 – $130,000
- Detached ADU with full Tamko roof system: $90,000 – $220,000
- Garage conversion: $30,000 – $80,000
What drives placement in that range: the roof’s square footage and pitch, whether a low-slope membrane is involved, whether the existing roof is tampered with mid-project, and whether the tie-in requires re-flashing against the existing house. You get a written, itemized price before work starts – parts and labor separated, no number that moves at the door. The 365-Day Done Right Promise covers the completed work for a full year: if the repair or install fails inside that window, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: read the bundle label or membrane wrapper to confirm the exact Tamko product, photograph any staining to track whether it spreads after rain, and look at the downspouts for granule buildup. What you shouldn’t touch: roof work at height, re-flashing a roof-to-wall tie-in, and lifting or replacing any roof covering on the addition. A new addition’s roof deck is often on a steep slope or a low-slope section where a wrong lap can pull water straight into the ceiling – and the consequences come back as mold and framing rot, not a quick fix. If you’re seeing a stain you can’t explain, that’s a professional’s call. Call (833) 954-5086 and we’ll give you a written price for the repair before anything gets touched.
FAQs

A Tamko Heritage asphalt shingle roof in the Westminster climate typically lasts 18 – 25 years on a properly vented addition, and a low-slope TW-50 or TW-60 membrane runs 15 – 20 years – so a failure inside the first year almost always points to an installation problem (a wrong lap, a missed tie-in, or foot traffic during install), not the material itself. Call (833) 954-5086 for an exact quote if the roof is new and already leaking – estimates are free.
Yes, in many cases – a localized flashing or tie-in failure can be repaired for $400 – $1,800 without replacing the whole roof covering. The repair is the right choice when the field shingles or membrane are sound and only the perimeter or transition has failed. Call (833) 954-5086 and we’ll tell you honestly whether a repair is the smart move or whether a replacement is what you actually need.
A targeted flashing or tie-in repair is usually a one-day job; a full roof-covering replacement over an addition typically takes 2 – 4 days depending on square footage, weather, and whether the tie-in has to be re-flashed against the existing house. A complete attached addition or ADU is a multi-week build. Call (833) 954-5086 to schedule a free estimate and get a firm timeline in writing.
We source Tamko products through documented manufacturer-approved channels and match the exact product – Heritage line, TW-50/TW-60 membrane, or WaterSeal – to what’s already on your addition before ordering. That way the install is traceable to the manufacturer’s spec, and the warranty behind it holds. Call (833) 954-5086 to get started with a written price.
Squared Away at Close
We also install additions and ADUs using KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and other documented brands across the Garrison roster – so the interior of a new space and the roof over it are held to the same standard. Every project closes clean, with a documented scope, a cleared site, and a signed written guarantee in your hand. Call (833) 954-5086 for a free estimate, and we’ll give you a written price before any work starts.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












