







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Westminster Owner’s Guide
A full IKO-spec bathroom remodel in Westminster typically runs $9,000 – $28,000 installed, with smaller bathrooms landing between $5,000 and $12,000. We handle the entire scope: waterproofing, tile, fixtures and the rough-in behind the walls. Every project gets a written price before work starts and a full-year guarantee under our 365-Day Done Right Promise.
Owners in Westminster usually discover a failing bathroom the same way: a soft spot in the subfloor near the tub, grout that keeps cracking no matter how often it’s patched, or a shower pan that stays damp for days. By the time those symptoms show up, water has typically been working behind the tile for months. That’s the pattern we see most often in this city’s older housing stock, where original 1960s and 70s shower pans are well past their service life.
Which IKO Models This Applies To

IKO is best known for roofing and waterproofing membranes, and that’s where most of our Westminster calls start: an IKO waterproofing membrane or underlayment spec that a homeowner wants carried into a bathroom remodel. If your project references IKO materials, the first step is identifying exactly which product line you’re working with. Check the original spec sheet, the product label on any leftover material, or the packaging roll end – each carries a series code and a stated coverage per roll. IKO’s membrane lines are specified by thickness and width, and those numbers have to match what’s going under your tile or the waterproofing warranty won’t hold.
Here’s the compatibility detail most homeowners miss: IKO membrane products are specified by mil thickness, and a thinner roll that looks identical on the shelf won’t meet the same coverage or performance spec as the original. If you’re matching an existing install, measure what’s there rather than trusting the label on a similar-looking roll.
On the OEM-versus-aftermarket question, the honest answer is that IKO’s own materials are the safe match when the spec calls for IKO. Aftermarket equivalents can work for some applications, but they carry different manufacturer warranties, and we won’t put our 365-Day Done Right Promise behind a material we can’t trace to a spec. We work with a documented roster of name-brand materials across every trade – KraftMaid, Cambria and Silestone among them – so every specification on your job is traceable. We’re an independent service provider and not affiliated with IKO.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
Before you call anyone, here’s what a failing bathroom actually looks like in a Westminster home:
- Grout that cracks in the same line every few months. This usually means movement in the substrate underneath, not bad grout. Repointing hides it for a while, but the movement keeps coming back until the substrate is addressed.
- A shower pan that stays wet or spongy underfoot. A pan that doesn’t drain fully or flexes when you step on it has likely lost its waterproofing layer. Water is sitting where it shouldn’t, and the framing below is taking the damage.
- Loose or hollow-sounding tile. Tap a few tiles with a screwdriver handle. A hollow sound means the tile has separated from the thinset, often because moisture got behind it. This is one of the earliest signs a waterproofing membrane has failed.
- Musty smell that returns after cleaning. Persistent odor in a bathroom usually points to moisture trapped in the wall cavity or subfloor. It won’t clear up with ventilation alone once the source is inside the assembly.
- Water staining on the ceiling below. If your bathroom sits over a garage or lower floor, a stain on the ceiling below is a direct signal that water is getting through the floor assembly. This one warrants attention right away because it means active moisture, not just wear.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what bathroom remodeling runs in Westminster, installed:
| Scope | Installed Price Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the range: square footage, whether the layout moves (relocating a drain or supply line adds labor and permit scope), tile selection, and the condition of what’s behind the wall once we open it. A waterproofing membrane failure often means replacing rotted framing and subfloor before any tile goes back down, and that’s the number nobody can quote honestly until they see it. That’s exactly why we open up the scope before we price it, then put the whole figure in writing before the first tool comes out. Every completed Westminster project carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and fix it at no charge. Free estimates, and the written quote is line-item so you can see where every dollar lands.
DIY or Call Us?
Some things you can check safely on your own. Tap for hollow tiles, look for cracked grout lines, check whether the shower pan drains fully, and look for staining on the ceiling below. Those are all visual and non-invasive.
The part you shouldn’t tackle yourself is the waterproofing assembly behind the tile, and that’s the actual cause of most bathroom failures. Getting it wrong means tearing out the finished work later, and it can mean water damage that reaches framing and subfloor before you see a single symptom inside the bathroom. A membrane that’s installed with the wrong overlap or at the wrong thickness looks fine on day one and fails quietly. This is where the trade’s real discipline lives, and it’s not a weekend project.
Call (833) 954-5086 to schedule your free estimate. A live person answers, 24 hours a day, seven days a week.
FAQs

How long does an IKO-spec bathroom last?
A properly installed waterproofing assembly under tile typically lasts 20 to 30 years before the membrane degrades, and the tile itself can outlast that. In Westminster, the parts that go first aren’t the tile – they’re the membrane and the shower pan, especially in homes built before 1980 where original pans are now 40-plus years old. Call (833) 954-5086 for an assessment of what you’ve actually got in there.
Can a failing bathroom be repaired instead of fully replaced?
Sometimes. A localized grout or caulk failure can often be corrected without a full remodel. But once water has reached the substrate or framing, a patch job just delays the real fix, and you’ll pay for the same work twice. The honest answer depends on what’s behind the wall, which we can only tell you after opening it up. Call (833) 954-5086 for a free estimate that spells out both options.
How long does the work take?
A shower replacement or tub-to-shower conversion typically runs 3 to 7 working days. A full bathroom remodel runs 2 to 4 weeks depending on tile, layout changes and whether framing work is needed. Every timeline is written into your quote before work starts, so there are no surprise delays. Call (833) 954-5086 to get your scope priced.
How do you source IKO-compatible materials?
We work with a documented roster of name-brand materials so every spec is traceable, with manufacturer specs and warranties backing our own 365-Day Done Right Promise. If your project specifies IKO membrane, we match the exact series, thickness and coverage rather than substituting a look-alike. Call (833) 954-5086 to talk through what your project calls for.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












