







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Westminster Owner’s Guide
If you’re reading this because a Schluter detail in your kitchen has failed or is starting to, here’s the short answer: we install and correct Schluter-compatible kitchen work in Westminster, typical full kitchen remodels run $14,000 – $45,000, and because this is planned construction rather than an emergency repair, we schedule it properly instead of pretending it’s same-day. Most Westminster owners discover the problem the same way: a tile edge that’s lifted a hair above the countertop, grout that keeps cracking in the same line, or a soft spot in the floor near the sink that squishes when you step on it. Schluter systems sit underneath the finished surface, so what you see is the symptom. The system below is what failed.
Key Takeaways
- Schluter is the brand behind the waterproofing, edge profiles and floor-prep systems under your kitchen tile, not a cabinet or countertop maker.
- Most failures trace to installation, not the product: wrong substrate, no movement joint, or the wrong profile series.
- Installed kitchen ranges for Westminster are $14,000 – $45,000 depending on scope, and every price is written before work starts.
- Every job carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
Which Schluter Models This Applies To
Schluter makes a wide catalog, and the kitchen work you’re looking at could involve one or more of these: Kerdi-Board and Kerdi membrane for waterproofing wet areas, Ditra and Ditra-Heat for uncoupling and floor warming, Kerdi-Line and Kerdi linear drains, Schluter-Shelf and Kerdi profiles for edges and trim, plus the Schiene, Quadec and Rondec edge profile families. The single most common compatibility mistake we see in Westminster kitchens is a homeowner buying a replacement profile by length alone. Schluter profiles come in specific height and finish combinations (for example, an 8mm vs 10mm vs 12.5mm height), and a profile that doesn’t match your tile thickness will sit proud or recess into the tile face. Check the part’s printed label, usually on the back of the profile or on the membrane packaging, for the series name and exact dimensions before you order. On the OEM-versus-aftermarket question: Schluter’s own parts are the safe call for anything under the tile, because the whole system is designed as a set. An aftermarket edge profile may work as trim, but aftermarket waterproofing under a wet area is where we’ve seen the most callbacks. We’re an independent service provider and not affiliated with Schluter, so we install and correct their systems but don’t speak for the company.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Cracked grout in a straight line along a wall or floor transition. That’s usually a missing movement joint or a substrate that’s flexing, and Schluter’s uncoupling systems exist precisely to stop that flex from reaching the tile.
- Tile that sounds hollow when tapped. Hollow sound means the tile has debonded from the thinset, often because the substrate wasn’t flat or the tile wasn’t back-buttered in a humid kitchen corner.
- A soft or spongy floor near the sink or dishwasher. That’s water getting past a failed Kerdi seam or drain detail, and in a Westminster kitchen the damage is often worse under the cabinet line where nobody looks.
- An edge profile lifting above the countertop or backsplash. The profile was set at a slightly different height than the tile, or the tile shifted while the thinset cured.
- White, chalky residue or efflorescence at the baseboard line. Moisture is wicking through a failed waterproofing layer and evaporating at the surface, which points to a seam detail rather than the tile itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

These are installed price ranges for Westminster, labor, materials and correction of the failed area included, so you can price the job before anyone walks in the door:
| Scope | Installed Range |
|---|---|
| Kitchen remodel (full, Schluter system corrected and reinstalled as needed) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: whether the failed area is localized or has spread under the cabinets, whether floor warming (Ditra-Heat) is being added or replaced, and whether the substrate needs rebuilding. We give a written, line-item price before any work starts, and our uniformed, background-checked technicians install with a documented roster of name-brand materials, including KraftMaid cabinetry, Cambria countertops and Silestone surfaces where the kitchen scope calls for them. The 365-Day Done Right Promise covers the completed work for a full year: if the installation fails inside that window, we return and correct it at no charge.
DIY or Call Us?
Some of this you can check safely yourself. Run a finger along the profile edge to feel for a lip. Tap tiles with a screwdriver handle and listen for hollow spots. Look for grout cracks and note exactly where they run. That information helps us quote accurately.
What you shouldn’t do: pull up tiles or peel back a Kerdi seam to “see what’s underneath.” A waterproofing system is a single continuous layer, and once you break a seam you’ve created the leak you were trying to diagnose. Under-tile work, uncoupling membrane removal, drain details and any repair that involves a wet area are the jobs where DIY calls turn into full re-dos. If your kitchen has any electrical changes, that’s a separate trade and needs a licensed electrician, full stop. Call (833) 954-5086 and we’ll tell you honestly whether it’s a repair or a rebuild.
FAQs

A properly installed Schluter system should last 20 to 30 years, with the tile surface often outlasting the substrate below it. In Westminster’s inland climate, the bigger risk is moisture from the sink and dishwasher area, not the outdoor temperature, so drain and seam details do the heavy lifting on lifespan.
Often yes, if the failure is localized. A single profile can be reset, and a cracked grout line at a movement joint can be corrected without tearing out the whole floor. Once water has reached the substrate or the cabinets, though, a partial repair usually costs more in the long run than fixing it properly. Call (833) 954-5086 for a free estimate and we’ll tell you which one you’re looking at.
A profile replacement or localized correction is a 1 to 2 day job. A backsplash or floor section that needs the Schluter system rebuilt under it runs 3 to 5 days, and a full kitchen remodel is two to four weeks depending on cabinet and countertop lead times. We schedule the work properly rather than promising same-day turnaround on planned construction.
We match the part to your existing Schluter series and dimensions from the label or by measuring the profile height and finish, then source it from authorized suppliers. We don’t keep stock and we don’t carry parts on a truck, so the part is ordered to your specific job. That’s also why we ask for the label photo up front. Call (833) 954-5086 to schedule your free estimate and we’ll confirm the spec before anything is ordered.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.
Bradford Remodeling Co Westminster gives you a written price before any work starts. Live person answers the phone 24/7. Call (833) 954-5086 for a free estimate.












