







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling: The Westminster Owner’s Guide
A Delta bathroom remodel in Westminster typically runs $9,000 – $28,000 installed, depending on whether you’re keeping the existing footprint or moving the rough-in. We build these projects around your Delta fixtures so the valve, trim, and drain lines line up the first time, and we put the whole price in writing before a single tool comes out. Most Westminster owners don’t start with a remodel plan at all. They start because a shower valve drips a thin line of water down the tile, or the handle spins loose, or the tub spout pulls away from the wall with a thread of calcium behind it. That first failure is the moment the bathroom stops being a room and becomes a project.
Which Delta Models This Applies To

Delta’s residential line splits into a few families that matter when we’re ordering parts or planning a valve replacement. The Monitor and Monitor 13/14 series use a single-handle pressure-balance cartridge, and the Multichoice universal rough-in valve accepts trim from several Delta lines. The classic 600 and 1700 series use the RP19804-style cartridge. Delta’s Universal Monitor and TempAssure lines take different cartridges still, and the shower-only 1300/1400 series uses another. The short version: two Delta shower valves that look identical on the wall can take parts that don’t swap, and that’s the single most common ordering mistake we correct in Westminster homes.
Identification is the whole game. The rough-in valve body under the handle is where the real model number lives. It’s often stamped or printed on the plaster guard if it’s still there, or on a label on the valve body inside the wall. Trim-only pieces don’t reliably tell you which cartridge sits behind them. We measure the cartridge itself, check the nut orientation and the length of the stem, and match it against the valve body before we order anything. On the OEM-versus-aftermarket question, Delta’s own replacement cartridges are the safe default because the tolerances are tight and the lifespan is predictable. A quality aftermarket equivalent costs less and works in some applications, but if the valve body is old enough that the seat is scored, no cartridge will fix it, and we won’t sell you one that can’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Bathroom Remodeling Is Failing
- The shower handle drips when closed. That’s a worn cartridge seal or a scored valve seat, not a loose screw. Water finds the worn rubber and keeps going.
- The handle feels gritty or won’t turn smoothly. Scale buildup inside the cartridge body. In Westminster’s hard water, this is the norm within a few years, and it gets worse in the summer heat.
- The tub spout pulls away from the wall. A failed set screw or a corroded slip-fit connection. It looks cosmetic until water gets behind the tile and the substrate starts to swell.
- Water temperature wanders when someone flushes a toilet. A pressure-balance valve doing its job, or a failing one that’s stopped sensing the pressure drop. Either way, it’s worth looking at.
- Calcium crust around the escutcheon plate. A slow leak behind the trim. By the time you see the crust, the drywall and the framing behind it have usually been wet for months.
Replacement Cost & What’s Included

Here’s what Delta-compatible bathroom work runs in Westminster, priced with parts and labor together.
| Scope | Installed Price Range |
|---|---|
| Shower replacement (valve and trim) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Full bathroom remodel | $9,000 – $28,000 |
The range moves on three things: whether we can reach the valve body without opening more wall than necessary, whether the substrate (the cement board behind the tile) has taken water and needs to come out, and whether you’re keeping the existing rough-in or moving it. A cartridge-only swap is the low end. A valve replacement with new substrate and re-tiling is where the numbers climb. Every price we give is written, line-item, and fixed before work starts, and the completed work carries our 365-Day Done Right Promise: if it fails inside a year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: shut off the water at the supply stops, look for calcium and moisture around the escutcheon, and confirm the model number on the valve body. Past that, we’d rather you didn’t. Replacing a cartridge means shutting off water to the whole house, pulling a stiff cartridge out without cracking the valve body, and resealing the assembly. Get it wrong and you’re ringing a plumber at midnight with water running down the wall. The valve body itself sits behind tile and drywall, and opening that wall is a remodel question, not a repair question. If the fixture is older, that’s also the moment to look at the whole room. Our technicians have up to 22 years of experience and we work with a documented roster of premium brands, including Delta, KraftMaid, Cambria, and Silestone, among others. Call (833) 954-5086 and we’ll price it honestly before anything comes apart.
FAQs

How long does a Delta shower cartridge last in Westminster? Typically five to ten years, and Westminster’s hard water pushes most of them toward the lower end. Scale is the enemy; a cartridge that runs dry or sits in mineral-heavy water wears its seals faster. If yours is past five years and starting to drip, it’s due.
Can a failing Delta valve be repaired instead of replaced? Often yes. If the valve body is sound and only the cartridge and seals are worn, a replacement cartridge and new seats will restore it. If the seat is scored or the body is corroded, no cartridge will fix it and the valve has to come out. Call (833) 954-5086 and we’ll tell you which one you’re looking at before any money changes hands.
How long does the swap take? A cartridge and trim replacement is typically a few hours. A full valve replacement involving opening the wall, new substrate, and re-tiling runs several days to a couple of weeks depending on the scope, and you’ll have a written schedule before we start.
How do you source the part? We match the cartridge to your Delta valve body, not to the trim on the wall, and order from documented manufacturer channels. Bradford Remodeling Co Westminster is an independent service provider and is not affiliated with Delta; we install and service Delta fixtures but don’t represent the brand. Every part we install is covered by our own written guarantee, and if the part itself fails inside the manufacturer’s warranty, we’ll help you handle the claim.
Book a Free Estimate in Westminster
If your Delta fixture is dripping, the handle feels wrong, or you’re ready to plan the bathroom around it, call (833) 954-5086. A live person answers, every time, and we’ll give you a written price for the work before a single tool comes out. Our projects in Westminster and nearby areas are covered by the 365-Day Done Right Promise, and we’ll leave the site squared away with the signed guarantee in your hand.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












