







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Westminster Owner’s Guide
We install Silestone-specified home additions and ADUs in Westminster, and a full addition typically runs $45,000 to $130,000 installed, with a detached or attached ADU at $90,000 to $220,000. Both are planned projects, scheduled around permits and a written scope, not dispatched in a day.
So the “failed part” framing on this page needs a straight correction before it costs you money. Silestone is a quartz surface from Cosentino, not a system with replaceable components, and it has no springs, no control board, no wear cartridge that fails and swaps out. What Westminster owners actually discover is a surface or a spec that washed out: a counter edge in the new ADU kitchen that chips because it was clamped too close to a corner, a slab that cracks over a floor that deflects, a bathroom vanity top that stains around the undermount cutout. We handle the causes, the sourcing, and the rebuild. We’re an independent remodeling contractor and are not affiliated with Silestone or Cosentino.
Key Takeaways
- Silestone is quartz surfacing. There is no “Silestone part” to order for an addition or ADU.
- Addition work in Westminster starts at $45,000. An ADU starts at $90,000.
- Every price is written before work begins, and the finished work carries our 365-Day Done Right Promise.
- Our technicians have up to 22 years of experience with quartz, cabinetry, and rough-in.
Which Silestone Models This Applies To

Silestone sells by color line, not by model year. Popular lines on the market include Eternal, Le Chic, Sunlit Days, and the classic Stellar and Nebula collections, and each color comes in standard slab thicknesses of 1.2cm, 2cm, and 3cm with jumbo and standard slab dimensions. When a homeowner tells us “we have Silestone” we don’t need a serial number. We need the color name, the thickness, and a photo of the edge profile, because those three things decide what we can match and how the slab has to be supported.
If you don’t know the line, look for the Cosentino back-stamp or the fabricator’s sticker on the underside near the sink or cooktop cutout. Failing that, measure the thickness at the front edge; a 2cm slab reads about ¾ inch, a 3cm reads about 1¼ inch, and a 1.2cm slab is close to ½ inch and usually laminated to a built-up edge.
Here’s the OEM-versus-aftermarket decision for Silestone specifically. There is no aftermarket “equivalent” of a Silestone color. Cosentino’s color formulations are proprietary, and no second manufacturer reproduces them exactly. So if your goal is to add a matching island top, a bar top, or a bathroom vanity in an existing Westminster addition, the only true match is the same color from the same line, and even then dye lots shift slightly over the years. A near-match from a competing quartz brand is a design choice, not a match. We source through material suppliers with traceable manufacturer documentation, never from an untraceable remnant pile, and we tell you plainly when a perfect match isn’t realistic. Bradford also works with documented KraftMaid cabinetry, Cambria and Kohler fixtures on the same scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- A hairline crack at a cutout corner. Quartz is strong in compression but brittle at a stress riser, and a sink or electrical cutout with a sharp inside corner concentrates stress. Left alone, it walks across the slab within a season.
- Chipping along the dishwasher or sink edge. Usually the slab was set over a cabinet run that isn’t perfectly level, so the overhang flexes when you lean on it. The chips show up where the edge overhangs the most.
- A “tent” or rock in the middle of a top. That’s a substrate problem, not a stone problem. The slab is bridging a dip in the cabinet or an out-of-level plywood deck, and every loaded point becomes a crack risk.
- Staining at the undermount seam. Silestone is non-porous, so a stain that won’t lift is coming from the joint, meaning the sealant under the vanity or sink rim has failed and is letting water into the cabinet below.
- Separation where the addition meets the original house. In Westminster’s coastal-influenced climate, wood framing moves seasonally, and a counter or cabinet run that spans a new-to-old wall can telegraph that movement as a gap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For an addition or ADU in Westminster, what actually gets replaced is rarely a single part. It’s a slab, a cabinet run, or a wet wall, and the price should be sized to the real scope. Our range for the whole project is $45,000 to $130,000 for a home addition and $90,000 to $220,000 for an ADU. Inside that, surface work prices at $2,000 to $6,500 for a countertop installation, $3,000 to $10,000 for a kitchen island installation, and $800 to $3,000 for a bathroom vanity installation. Line items like these are written out one by one, never bundled into a single number.
The range moves on four things: slab color and thickness, the amount of edge profile work, whether the cabinets under the slab are sound or need to be rebuilt with KraftMaid or another documented line, and how much of the plumbing or electrical rough-in has to be opened up. Silestone slabs cost more than most entry quartz; a 3cm jumbo slab in a premium line sits at the top of the surface band.
Every one of those prices is fixed before we start, with no number that moves at the door. What’s included: material, fabrication, install, haul-away, and the finished work covered by our 365-Day Done Right Promise for a full twelve months. If a joint fails or an edge chips inside that window, we come back and correct it at no charge.
Call (833) 954-5086 for a free estimate.
DIY or Call Us?
Quartz is one of the least DIY-friendly materials in a house, so be honest with yourself about the split. What you can safely do is inspect: photograph the crack or chip, check for movement by pressing gently on the overhang, look under the sink and under the vanity for water staining, and read the back-stamp so we know the color line. What goes wrong when owners try the rest is real, too. Quartz slabs run 100 to 300 pounds, they snap if carried or cut wrong, and cutting quartz dry kicks up silica dust that can cause serious lung damage with repeated exposure, which is why shops wet-cut with PPE. Setting a slab onto a cabinet run that isn’t dead level guarantees a future crack, and a bad silicone joint on an undermount sink leaks into your cabinetry for months before you notice. This is the work to hand to a trained crew. For a chip repair or a joint reseal, that same crew is the right call. For a full replacement, it’s the fabricator and installer together.
Call (833) 954-5086 and we’ll tell you which one you need.
FAQs

A properly installed Silestone slab routinely lasts 20 to 30 years or longer in a Westminster home; it’s non-porous quartz, so it resists moisture and staining far better than natural stone. What fails early is almost never the surface itself, but the substrate and the joints under it. In Westminster’s mild coastal climate, wood framing and cabinet cases move with the season, and a joint that was run tight in a wet winter can show a gap by fall. Get the substrate level and dry at install and the surface outlasts the cabinets.
Yes, for small chips and hairline cracks that haven’t crossed a cutout. A trained fabricator can fill, sand, and polish the area with a color-matched resin, and the result is often invisible on a solid or fine-grain color. What can’t be reliably repaired is a slab that has separated at a seam, rocked on a bad substrate, or broken through a stress riser near the sink, because the repair masks the cause and the crack returns.
A single countertop or vanity top is typically a one- to two-day install once the slab is fabricated and on site, with templating and shop cutting adding a stretch of time ahead of that. A full kitchen or island rebuild is longer, and an entire addition or ADU is measured in weeks and laid out on a written schedule you get before anyone starts.
We source through material suppliers with traceable manufacturer documentation, matching the color line, thickness, and edge from the back-stamp or a photo of the existing slab. There is no aftermarket equivalent of a Silestone color, so we don’t pretend a competing quartz is a match; if a perfect match isn’t realistic for an older color, we’ll tell you straight and show you what’s actually possible.
One more thing worth saying about the reader who landed here looking for a replacement part: if you came for a quick swap of a mechanical component, this page isn’t the right one, and we’d rather point you correctly than sell you work you don’t need. What we do build is additions and ADUs, whole-home remodels, and the kitchens and baths inside them, squared away at close with a clean site, a documented scope, and a signed written guarantee in your hand.
Call (833) 954-5086 for a free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Westminster, serving Westminster and nearby areas.












