







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westminster Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Westminster, CA, for homeowners who already own Mr-Glass glass, showers and mirrors, or for those ready to install one. Our team has up to 22 years of experience, and much of that work is on Mr-Glass specifically, so we know the OEM hardware, hinge specs and panel tolerances that generic remodelers routinely get wrong.
To be clear about who we are: Bradford Remodeling Co Westminster is an independent Mr-Glass service provider. We are not affiliated with, sponsored by or authorized by Mr-Glass. What we offer is a crew that has done this work long enough to read a Mr-Glass enclosure and tell you what’s actually wrong with it.
Westminster is one of the densest concentrations of mid-century tract housing in Orange County. Thousands of 1950s and 60s homes, especially the Stardust tracts and the Little Saigon-area blocks, are still held by the same families or have changed hands as flips. Construction here runs on remodel and addition work, not greenfield builds. Bathrooms are where Mr-Glass lives, and we’re in those room the most.
Every price is written before a tool comes out. A live person answers the phone around the clock at (833) 954-5086. Call for your free estimate.
Why Trust Bradford Remodeling Co Westminster for Your Mr-Glass Construction?

Mr-Glass makes a specific family of products, and specific products fail in specific ways. That’s the whole game here. A frameless slider that drops usually wasn’t anchored to blocking, and a pivot hinge that pulls out of its screws usually had no glass-edge clearance set into it. You don’t learn that from a brochure. You learn it from pulling glass out of a wall and looking at what’s behind it.
Our technicians have up to 22 years of experience on glass and tile work, and they can tell the difference between a hardware problem you can fix and a glass problem that ends the conversation. We source OEM-compatible parts for the hardware you own, so the fix holds. Generic aftermarket sweeps and rollers often don’t match the extrusion, and they leak or bind within a season.
Every job gets a written price before any work starts. No number moves at the door. Every completed project carries our 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge. When we close out a Mr-Glass install, you get a clean site, a documented scope of what changed, and a signed written guarantee in your hand.
We also don’t claim to stock Mr-Glass parts locally. We source them for each job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Westminster
Here are the issues we see walking into Westminster bathrooms again and again, tied to the actual Mr-Glass product families in the field.
- Sagging or dropped sliding doors on Serenity-style frameless systems. The top rail was anchored into drywall or thin tile backer instead of solid blocking in the wall. Over a few years the screws lose their bite, the panel drops, and the door starts dragging the curb. The glass is almost always fine. The anchoring isn’t.
- Water weeping past the bottom sweep on sliding enclosures. The sweep and door-to-panel gap no longer line up because the unit was set out of plumb on an unlevel curb. The pieces were right. The install wasn’t. A re-leveled curb, a fresh sweep and a proper gap set solve it.
- Stripped hinge screws on semi-frameless pivot doors. Heavy frameless pivots mounted without proper glass-edge clearance or through-glass backing will work their screws loose, and once they strip, the door hangs wrong. We check the hole in the glass before we ever rehang a door.
- Tempered seal failure on fixed panels and return panels. Fogged edges on a tempered panel mean the seal has gone and can’t be stopped, and a re-hardware won’t save it. The glass has to be replaced. We tell you that as soon as we see it, not after you’ve paid for a repair.
- Hard-water etching on custom-cut mirrors and glass shelving. Orange County water is mineral-heavy, and a coating cleaned with abrasives scratches permanently. Once the finish is dulled, the clarity doesn’t come back. It’s the one issue we can’t fix, but we can tell you how to avoid it on the replacement.
One common call we hear about: a frameless Mr-Glass slider that has started to drag and let water onto the bathroom floor. The usual cause is a top rail anchored to drywall or thin backer instead of solid blocking, so the panel drops and the sweep no longer meets the curb. Sometimes an unlevel curb is also holding the door out of plumb. A qualified local pro typically pulls the glass, adds proper blocking, re-sets the enclosure plumb, and replaces the rollers and bottom sweep with the matching OEM parts. That’s the sequence that lasts.
Mr-Glass Parts & Our Repair-vs-Replace Approach

For hardware, we use genuine Mr-Glass replacement parts: rollers, bottom sweeps, hinges and seals. We don’t reach for the aftermarket sweep that looks close. The profiles don’t match, and you get a leak or a bind within a season. The extra cost of the right part pays you back the first time you close the door.
The repair-or-replace decision follows one rule. If the tempered panels are sound and the frame isn’t corroded, we repair the hardware and re-set the enclosure. That’s the honest fix, and it costs a fraction of a full unit replacement. If a panel is chipped, especially at the hinge holes, or the frame has gone, we replace the unit and explain why before we quote it. We’ve never talked a homeowner into a new enclosure they didn’t need.
Call (833) 954-5086 and we’ll look at your Mr-Glass installation and tell you which side of that line you’re on. Estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the Mr-Glass unit in place: anchor points, plumb, curb level, glass-edge clearance at the hinges, sweep condition, and any chipping or seal failure on the tempered panels. We come out knowing which parts are the problem and which ones aren’t.
- 2
Repair or install. For frameless and semi-frameless systems, that means pulling the glass, adding blocking where the original anchor missed it, re-setting the unit plumb on a leveled curb, and installing the matching OEM rollers, hinges, sweeps and seals. For new installation, the same standards apply from the first screw.
- 3
Test. We open and close the door through its full swing, check the sweep meets the curb along its length, and run water at the door-to-panel gap. We don’t call a job done until it passes in front of you.
- 4
Warranty. Every finished project gets a documented scope of what we changed, the site cleaned, and our 365-Day Done Right Promise in writing. If the work fails inside a year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Westminster

We handle the Mr-Glass lines that actually show up in Westminster homes. The core of our work is the frameless sliding shower door systems (Serenity-style), where a dropped slider from missing wall blocking is the most common call. We also work on semi-frameless pivot shower doors, both installing new units and correcting stripped hinge screws and re-setting frameless pivots. Fixed glass shower panels and return panels are a regular install and replacement, especially when tempered seal failure ends the useful life of a panel. And we cut and install custom mirrors and glass shelving, with a note on the coating care that keeps the finish clear.
We don’t claim to keep parts in stock locally. Every job is sourced to fit your unit.
We Also Service These Brands
Mr-Glass is what we do best, but Bradford Remodeling Co Westminster works across a documented roster of name-brand materials, so a Mr-Glass project doesn’t have to be handled by a single-brand crew. We install KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among other lines with manufacturer specs and warranties that back our own. If your shower remodel pulls in a new vanity or a Kohler tub, we cover the whole room.
FAQs – Mr-Glass Construction Service in Westminster
No. We are an independent Mr-Glass service provider, not affiliated with, sponsored by or authorized by Mr-Glass. We work on Mr-Glass products because we know them well, not because Mr-Glass endorses us. Call (833) 954-5086 with questions about your specific unit.
Yes, for hardware. We use genuine Mr-Glass replacement rollers, bottom sweeps, hinges and seals because aftermarket parts don’t match the extrusion profile and tend to leak or bind within a season. When a specific part isn’t available, we tell you before we proceed. Call (833) 954-5086 and we’ll check what your model needs.
A standard hardware repair and re-set on a Mr-Glass slider is usually a single visit. A full enclosure replacement takes longer because the glass is templated and fabricated to your opening. We give you the timeline in writing before work starts. Call (833) 954-5086 to schedule your free estimate.
We cover the lines that show up in Westminster homes: Serenity-style frameless sliding systems, semi-frameless pivot doors, fixed and return glass panels, plus custom mirrors and glass shelving. If you’re unsure whether your unit fits, call (833) 954-5086 and describe it. We’ll tell you straight.
Our work doesn’t remove any warranty the manufacturer gives you, but we’re an independent provider, so we can’t speak for Mr-Glass’s coverage on their hardware. We use genuine parts and install to spec to protect whatever warranty applies. Every job also carries our own 365-Day Done Right Promise in writing. Call (833) 954-5086 for details.
Here are the ranges we work within for Mr-Glass shower projects in the Westminster market. Every price is written before work starts, and there are no change orders once the number is set.
| Mr-Glass Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
The lower end holds when your existing tile and curb stay in place. The upper end comes when the tinted job pulls in a re-leveled curb, a re-tiled pan, and new fixtures. Call (833) 954-5086 for an exact quote. Estimates are free.
Yes, in most cases. A dragging slider that also leaks usually means the top rail was anchored to drywall or thin backer instead of solid blocking, so the panel dropped, plus a worn or mismatched bottom sweep. We pull the glass, add blocking, re-set the unit plumb, and install the matching OEM rollers and sweep. The glass and frame stay. Call (833) 954-5086 to have it looked at.
Yes. A chip at a hinge hole in tempered glass is a failure point, and no fix makes it safe to rehang a heavy frameless pivot on it. That’s the one case where we recommend a new panel instead of hardware. We’ll show you the chip and explain the reason before you commit. Call (833) 954-5086.
A frameless glass shower enclosure runs $4,500 – $12,000 in Westminster, and a walk-in installation sits in the same range at $4,500 – $12,000. A shower replacement without major tile work is $3,000 – $8,500, and a tub-to-shower conversion is $3,500 – $10,000. Call (833) 954-5086 for a written quote on your specific bathroom.
Use a soft cloth and a non-abrasive, pH-neutral cleaner, and wipe and dry the glass after each shower. Abrasive pads and harsh mineral-stripping products dull the coating permanently, and once it goes, clarity doesn’t come back. Orange County water is mineral-heavy, so a quick dry-down matters more here than it does in a softer-water city. Call (833) 954-5086 if your glass is already etched and you want to know whether it’s worth replacing.
Usually yes, if the existing curb is level and the opening is sound. Frameless systems are measured to the actual opening, so a small out-of-square doesn’t end the install. A badly out-of-level curb or missing blocking means we address the wall first. We measure on site before we ever order. Call (833) 954-5086 to set up a free measure and estimate.
Book Your Mr-Glass Service in Westminster, CA
Whether your Mr-Glass frameless slider has started to drop, your pivot hinge is stripping, or you’re ready to install a new walk-in enclosure, call Bradford Remodeling Co Westminster at (833) 954-5086. We write the price before we start, answer the phone with a live person around the clock, and back every completed project with our 365-Day Done Right Promise in writing. Estimates are free.
Written by the team at Bradford Remodeling Co Westminster.












