







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Westminster?
Walk-in shower installation in Westminster typically costs $4,500 to $12,000 for a full project, with most homeowners landing somewhere near the $7,000 to $8,500 mark for a curbless tile shower with a frameless glass panel. A simple prefab acrylic swap sits at the low end of that range, while a custom-tiled shower with a linear drain, bench and premium Kohler or Moen fixtures pushes toward the top. The number you get depends mostly on shower size, waterproofing method, tile choice and whether the drain has to move. We put every one of those items in a written price before any work starts, so the number you agree to is the number you pay.
Key Takeaways
- Most Westminster walk-in showers run $4,500 to $12,000 installed.
- A curbless, tile-and-glass shower usually lands between $7,000 and $8,500.
- Moving the drain and re-framing a tub alcove add the most to the total.
- Waterproofing method matters more than tile price in a coastal Orange County climate.
- Every finished project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a typical Westminster walk-in shower breaks down by line item. These are ranges we quote in this market, not national averages pulled off a website.
| Line Item | Price Range | Notes |
|---|---|---|
| Demolition and haul-away | $400 – $900 | Tub removal, tile tear-out, dump fees |
| Rough-in plumbing (drain, valve) | $600 – $2,200 | Higher when the drain has to move |
| Framing and substrate | $500 – $1,600 | Cement board or foam board, curb build |
| Waterproofing system | $500 – $1,500 | Roll-on membrane or bonded sheet system |
| Tile and setting materials | $900 – $3,500 | Porcelain, ceramic, natural stone |
| Tile labor | $1,200 – $3,200 | Larger format and mosaics cost more in labor |
| Shower pan / linear drain | $400 – $1,800 | Curbless pans and linear drains sit at the top |
| Glass enclosure and door | $700 – $2,600 | Frameless glass at the high end |
| Fixtures (Kohler, Moen) | $300 – $1,400 | Trim, valve, showerhead, handshower |
| Permit and inspection | $150 – $600 | Required when plumbing moves |
Add the line items up and you get a real picture: a basic acrylic or fiberglass walk-in shower runs $4,500 to $6,000, a mid-grade tiled shower with a framed glass door lands $6,000 to $8,500, and a full custom build with a curbless entry, bench, niche and frameless glass reaches $9,000 to $12,000. Those numbers mirror what we quote on bathroom remodeling in Westminster, where a shower is usually the single largest line item in the room.
The biggest swing factor is plumbing. If the existing drain sits where the new shower wants it, your rough-in stays cheap. The moment it has to move a few feet to center a linear drain, you’re cutting floor joists, re-routing, and paying for inspection. That single change can add $1,000 to $2,000.
What Affects Walk-In Shower Installation Pricing in Westminster
Five things move the number more than anything else. We walk every one of them with you on a free estimate so there are no surprises later.
- Shower footprint and layout. A standard 36-by-60-inch alcove is the cheapest and cleanest build because the walls are already there. Turning that same space into a 48-inch walk-in with a bench and niche adds framing, tile and glass, and that’s where the price steps up.
- Waterproofing method. Westminster homes sit a few miles from the coast, and the marine layer pushes indoor humidity up year-round. We build with bonded waterproofing membranes and cement-based substrate, not greenboard, because a failed pan behind tile is the most expensive repair in a bathroom. A proper system runs $500 to $1,500 and it’s the line item we never cut corners on.
- Tile selection. Porcelain and ceramic are the workhorses: durable, water-resistant, and priced reasonably. Natural stone like marble or travertine runs higher in material cost and needs sealing, and large-format slabs cost more in labor because they’re harder to set and cut.
- Glass and hardware. A semi-frameless door keeps the price down. A full frameless glass enclosure with 3/8-inch tempered panels is the upgrade most homeowners ask for, and it adds $700 to $2,600 depending on size and configuration.
- Permits and inspections. In Westminster, any change to the drain, valve or plumbing rough-in requires a permit through the city’s building department, and that means an inspection. We pull permits when the scope requires it, and the cost is built into the written price so nothing shows up as an add-on.
- Age of the home. Many Westminster houses in neighborhoods like Little Saigon and the Westminster Boulevard corridor date to the 1950s through 1970s. That means galvanized supply lines, cast iron drains and sometimes a second layer of floor tile hiding original subfloor. We plan for what we find, and we tell you before we open a wall if there’s likely to be a surprise behind it.

How to Save on Walk-In Shower Installation
There’s real money in these decisions. None of them require you to sacrifice quality:
- Keep the drain where it is. Centering a linear drain is a nice upgrade, but if the existing rough-in works, leaving the plumbing in place saves $1,000 or more.
- Choose porcelain over natural stone. Porcelain gives you the look of stone without the sealing and maintenance, and it costs significantly less in both material and labor.
- Stick with the existing alcove. Converting a tub to a shower reuses the existing footprint and drain location, which is why a tub-to-shower conversion in Westminster starts at $3,500 versus $4,500 for a from-scratch build.
- Shop the fixtures, not the labor. Kohler and Moen both offer quality lines at every price point. Picking a mid-tier trim package saves without touching the workmanship.
- Bundle with a full bathroom remodel. If the vanity, floor and lighting are also due, doing it all at once saves on mobilization and demolition. A full bathroom remodel in Westminster starts at $9,000, and combining scope is the most efficient way to spend.
One thing we won’t do: quote you a number that’s lower than the real one to win the job. The written price we give you at estimate time is the number we hold. If you get three bids and one is dramatically lower than the rest, ask what’s missing from it. Usually it’s the waterproofing or the permit. Call (833) 954-5086 and we’ll walk you through a free estimate with every line item visible.
Prefab vs. Custom Tile: Which Walk-In Shower Costs Less?
A prefab shower pan and wall kit costs $4,500 to $6,000 installed. A fully custom tiled walk-in shower costs $7,000 to $12,000. The prefab route is faster and cheaper, but it limits you to factory sizes and finishes. The custom route gives you any footprint, tile choice and glass configuration you want, and it’s the option most homeowners pursue once they’ve seen what’s possible.
Here’s the honest trade-off. A prefab unit can be installed in three to four days with the right crew. A custom tile shower takes seven to fourteen working days once demolition starts, because waterproofing has to cure and tile setting is slower work. If you need the bathroom back fast, prefab is the practical answer. If you plan to stay in the home and want a shower that looks built-in and lasts, custom tile is worth the extra time and money.
We install both. The same background-checked, uniformed technicians handle either job, and either one carries the 365-Day Done Right Promise.
What Does the 365-Day Done Right Promise Cover on a Walk-In Shower?
The 365-Day Done Right Promise means this: for a full year after your project is complete, if any part of the work we performed fails, we return and correct it at no charge. On a walk-in shower, that covers the waterproofing, the tile setting, the pan, the drain connection we installed, the glass installation and the fixture installation. If a grout line cracks, if a tile lifts, if the pan leaks or the door doesn’t close right, we come back and fix it.
It does not cover damage from a plumbing failure upstream of our work, or normal wear on a shower door seal or a cartridge. We’re clear about that boundary up front so nobody’s guessing later. Every project closes with a signed written guarantee in your hand, alongside the manufacturer warranty on the Kohler or Moen fixtures and the tile manufacturer documentation. That’s what squared away looks like: clean site, documented scope, signed guarantee. If you want the general contracting side explained in plain terms, our general contracting page covers how we run a project start to finish.
Walk-In Shower Installation vs. Other Bathroom Upgrades: What Do They Cost?
Homeowners often ask how a walk-in shower compares to other bathroom projects before they commit. Here’s the same Westminster pricing we quote across the bathroom:
- Shower replacement (like-for-like): $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
- Walk-in shower installation: $4,500 – $12,000
- Bathroom vanity installation: $800 – $3,000
- Small bathroom remodel (full room): $5,000 – $12,000
- Full bathroom remodel: $9,000 – $28,000
If the existing shower is already a walk-in and only needs a refresh, shower replacement in Westminster can come in below a full install. If the tub is going, a conversion sits between the two. And when the room itself needs everything replaced, a full remodel spreads the mobilization cost across more work. If you’re weighing a larger project that includes the bathroom plus an addition, see our home addition page for Westminster for the numbers on structural work.
Why Choose Bradford Remodeling Co Westminster for Your Walk-In Shower?
Bradford Remodeling is a member of the Garrison Partners family, established in 2004, and operates as an independently owned and operated business held to The Garrison Standard. That standard is the reason every job gets a written price before any work starts and every completed project gets the 365-Day Done Right Promise. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and homeowners know exactly who is coming before the crew arrives. The phone is answered by a live person 24 hours a day, 7 days a week, not a voicemail or callback queue.
On materials, we work from a documented roster of name-brand suppliers so specifications are traceable. On showers and bathroom work that means Kohler and Moen fixtures, plus Caesarstone and Cambria surfaces when a vanity is part of the scope. Nothing is left to guesswork, and nothing is substituted without your sign-off. That approach carries across everything we build, from a kitchen remodel in Westminster to a small kitchen remodel to cabinet installation and countertop installation elsewhere in the home.
We serve homeowners across Westminster and nearby communities, including Huntington Beach, Garden Grove, Fountain Valley and Seal Beach, and the wider coverage is laid out on our Westminster service area page. If you’re planning a broader renovation, the same written-price standard applies on whole-home remodeling and on ADU construction, both priced in the same document-first way. Start with a look at our home page for how we work, or go straight to a quote.
FAQs – Walk-In Shower Installation Cost
How much does walk-in shower installation cost in Westminster?
Walk-in shower installation in Westminster costs $4,500 to $12,000 installed, with the typical project landing between $7,000 and $8,500. Prefab units sit at the low end and custom curbless tile showers reach the top of the range. Call (833) 954-5086 for an exact quote – estimates are free.
Is it cheaper to convert a tub to a shower or install a new walk-in shower?
A tub-to-shower conversion is usually cheaper, starting at $3,500 versus $4,500 for a new install, because the drain location is reused and the alcove is already framed. The final number depends on whether the plumbing stays put. Call (833) 954-5086 and we’ll tell you which route fits your space.
Can you come out today for a walk-in shower estimate?
Yes, same-day estimates are often available in Westminster when you call early. We answer the phone 24/7 with a live person, so you won’t be routed to voicemail. Call (833) 954-5086 to schedule.
How long does a walk-in shower installation take in Westminster?
Most walk-in showers take 7 to 14 working days from demolition to final glass install. Prefab units can finish in 3 to 4 days. Waterproofing cure time is the main factor that sets the schedule. Call (833) 954-5086 and we’ll give you a realistic timeline in writing with your estimate.
Does a walk-in shower installation need a permit in Westminster?
Yes, a permit is required whenever the drain, valve or plumbing rough-in changes, which is most walk-in shower projects in Westminster. The permit and inspection run $150 to $600 and are built into our written price. Call (833) 954-5086 with your address and we’ll confirm the scope for your home.
Get a Written Price for Your Walk-In Shower
You’ll get the number in writing before a single tool comes out: line items, materials, timeline and the 365-Day Done Right Promise attached to the project. No repricing at the door, no surprise invoices, no crew of strangers. Call (833) 954-5086 for a free estimate on your walk-in shower installation in Westminster. A live person answers 24/7.
Pricing reflects the Westminster market as of 2026. Bradford Remodeling Co Westminster offers free estimates – call (833) 954-5086.
What Our Customers Say
"Straightforward people who do what they say. The crew did what the contract said and called before changing anything."
- Dianne W."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Fixed price, written scope, and no surprise charges."
- Wes D.












